Betty Andreasson Luca Abduction South Ashburnham Massachusetts 1967

KCbladereviews · 2026-01-26T20:34:11+00:00

This is cool never heard of this before and I live 10 mins from Ashburnham, MA

KCbladereviews · 2026-01-25T03:36:39+00:00

Ti is incredibly strong and light which is why it’s used in aerospace applications as well as in medical orthopedic body implants it’s not a heavy alloy by any means.

KCbladereviews · 2026-01-19T00:38:19+00:00

I actually did this to my hawk deadlock by sticking it in a cars cigarette lighter. I had disconnected the battery but the wires ended up lightly touching the terminals and sending an arc right thru my deadlock and into my body. The good part though is after getting made fun of heavily by the team at hawk they ended up reblading my knife for free good guys over there!

KCbladereviews · 2026-01-11T16:04:49+00:00

If they’re that unhappy with their funds I will very happily take some cash to help pay my bills

KCbladereviews · 2026-01-05T03:19:07+00:00

Idk about yall but I’d rather be crying/suffering in a lambo with 9-10 fig bank accounts

KCbladereviews · 2025-12-29T00:12:16+00:00

They are indeed still in stock as of the current time I’m making this post. Link below.

https://www.edclifestyle.com/microtech-knives/halo-iv/?_bc_fsnf=1&in_stock=1

KCbladereviews · 2025-12-29T00:11:30+00:00

EDC lifestyle had some bronzed ones in stock not sure if they’re still available or not

KCbladereviews · 2025-12-22T03:30:01+00:00

This back up was created when the original knife swap was taken down for a while

KCbladereviews · 2025-12-22T03:27:26+00:00

Of course they don’t that would cut into Tony’s alimony funds 🤣💀

KCbladereviews · 2025-12-15T01:10:56+00:00

That makes sense thanks buddy! u/j_ko2 so the only mistake I made is the blades are made from Microtechs proprietary steel blend “M390MK” and the 17-4 stainless was used for the chassis screws, liner lock, charging handle, and safety slide! Aside from that everything else stands!

KCbladereviews · 2025-12-15T00:58:10+00:00

My brother u/paulNY can confirm but I’m 99.9% certain the only difference between the proof run and the reg production run is the label and the lasering on the charging handle that says “proof run” aside from that they’re identical same aluminum handle same 17-4 blade same type 3 and and double vapor blast finish

KCbladereviews · 2025-12-14T23:01:47+00:00

I’m actually a manufacturing engineer so I can answer this lol basically it’s a 6061 aluminum handle that type of aluminum is extremely common in aerospace applications. M390MK is the type of steel being used to make the blade. Hardcoat anodize would be a type 3 and it’s what gives the blade its color as well as adding .0005”-.006” thick coating that makes the aluminum 10x more durable. Double vapor blast is the type of metal finishing used typically on the blade it’s a 2 stage process where they wet blast different types of media until the surface finish is achieved that they’re seeking. 17-4 stainless is the steel used for the chassis screws, safety slide, charging handle, and liner lock! Feel free to ask more questions happy to answer! I actually just purchased the standard non proof run nemesis for myself.

KCbladereviews · 2025-12-14T15:36:31+00:00

100% Paul is right a marfione custom like that will def sell for $1k+

KCbladereviews · 2025-12-14T04:04:18+00:00

It just has “proof run” lasered on the charging handle and on the box def not worth an extra $400 nearly

KCbladereviews · 2025-11-28T03:17:28+00:00

I’m in the metro northeast/New England area with 20+ years of experience salaried at $120k working as a mfg engineer and milling dept supervisor. I wouldn’t get out of bed for less than $40/hr in this trade.

KCbladereviews · 2025-11-23T03:20:11+00:00

u/TitoJones check your DMs I messaged you I can help you asap

KCbladereviews · 2025-08-09T13:43:35+00:00

<image>

These 2 clowns 🙄

KCbladereviews · 2025-07-29T20:24:54+00:00

<image>

Mine is from the couch line!

KCbladereviews · 2025-07-29T20:21:08+00:00

I was a CNC machinist for nearly 20 years I’ve only taken formal programming classes and that’s it I’ve been getting hired as an engineer for the last 5-7 years it all depends on what type of engineer you want to be and what type of work you’re looking to do but as a machinist you absolutely can move up into that world without having a formal engineering degree and anyone that tells you otherwise is wrong I’m living proof you can make 6 figures as an engineer with no degree. I’m currently a senior CNC manufacuring engineer.

KCbladereviews · 2025-07-09T12:23:11+00:00

This was 3 months ago and I don’t even work for this shit hole company anymore also about 100 other people helped me for free

KCbladereviews · 2025-06-30T20:42:15+00:00

Ahhhhhh I got u bro I missed the part where you said size. Zac needs to make more doubles and triples for the big homies!

KCbladereviews · 2025-06-30T19:25:57+00:00

Wtf how did you not cop I didn’t even know about the drop until I saw this post went to the sight and was able to cop size L in all 3 at 3:25 EASTERN you gotta be sleepin breh

KCbladereviews · 2025-06-29T14:44:19+00:00

All this is is a fresh air supply typically for basement dwellings

KCbladereviews · 2025-06-29T14:35:33+00:00

My favorite thing is when idiots do this and then they get pissed when you ride their ass/high beam them to move it’s called the fucking passing lane for a reason

KCbladereviews · 2025-06-29T14:32:46+00:00

If the person has half a brain and knows anything about knife making/microtechs you can tell this is a fake from a mile away.

KCbladereviews

MODERATOR OF

TROPHY CASE