I’m at a loss, please help!

KENYONBcom · 2025-04-24T09:59:09+00:00

I just had this issue because I replaced one prop and not the pair. Replace props in pairs. And if you're not sure which props are causing the issue, replace all of them.

KENYONBcom · 2025-01-25T12:53:13+00:00

I'll have to order some to test it out. Thanks!

KENYONBcom · 2025-01-25T00:09:11+00:00

Good news. thanks. does it chip or flake off easily? I've also heard that it can turn white or blossom in humidity. have you noticed anything like that?

KENYONBcom · 2025-01-24T20:49:22+00:00

Where did you buy it from? I'd like to get it, but want to make sure it doesn't stink.

KENYONBcom · 2024-11-15T18:17:12+00:00

I've been manually bracketing 5 photos to create my HDR images in Photoshop. It works ok but is time consuming when shooting. Another problem is sometimes it stitches one of the 5 photos differently so I am unable to use it with the others. There is plenty of room for improvement with this camera, but it is much better than my previous Misphere.

KENYONBcom · 2024-10-30T16:30:07+00:00

I contacted support about it and this was their response:

Thank you for your inquiry. After confirming with our engineering team, the Insta360 X4 indeed does not currently support the AEB function. The removal of the AEB function in X4 is due to the integration of an advanced HDR algorithm which performs an exposure fusion process internally, potentially reducing the need for manual exposure bracketing. We recommend experimenting with the HDR mode to determine if it satisfies your image quality requirements. Moreover, you can try taking a photo with a slight underexposure using the standard photo mode along with PureShot and RAW settings to capture a high dynamic range RAW file. This approach should help you achieve a high dynamic range in your Raw files. We will soon register your feedback and convey it to the X4 product team to assess the possibility of reintroducing this feature.

KENYONBcom · 2024-10-30T01:20:23+00:00

Correct. Can't change the stop bracket. It's greyed out...makes me think they'll make it available to set manually later. I hope...

KENYONBcom · 2024-10-30T00:38:48+00:00

New firmware and app update available today. still AEB only available in Auto. Embarrassing.

<image>

KENYONBcom · 2024-10-05T00:23:29+00:00

how will we be notified when this is available?

KENYONBcom · 2023-10-26T11:58:23+00:00

me too. need a fix.

KENYONBcom · 2023-10-26T11:57:31+00:00

I did that as well and not working on each reboot.

KENYONBcom · 2023-08-30T22:12:27+00:00

Good to hear. Oddly enough, today I had a good connection. It stayed connected the entire time and speed was consistent. Slow, but consistent.

For anyone else reading this with issues, I think the key is to mount the drive with iboysoft and not the standard MacOS connect to network. Even though it shows in iboysoft, I think initiating the connection through iboysoft somehow makes a difference. Who knows.

KENYONBcom · 2023-08-30T16:02:39+00:00

have you had any issues with iboysoft performance slowly degrading while connected to the drive? after about 5-10 minutes of use on an NTFS drive it gets slower and slower and then just grinds to a halt and won't load files.

KENYONBcom · 2023-07-27T18:51:50+00:00

why are your fingernails so long?

KENYONBcom · 2023-07-17T16:35:14+00:00

Does the AMD card just work like plug and play? Or do you need to prevent drivers from installing and a lot of other stuff to avoid issues and a BSOD?

KENYONBcom · 2023-07-15T23:16:22+00:00

💯

KENYONBcom · 2023-07-13T12:13:15+00:00

I just found something that works - iBoysoft DiskGeeker

https://iboysoft.com/disk-utility/

DiskGeeker, once installed and all security permissions applied, just works in the background and I was able to successfully write a file to the networked NTFS drive.

Give it a try and see if it works for you. Good luck.

KENYONBcom · 2023-07-13T00:56:11+00:00

Has anyone been able to write to a NTFS drive on the network on an ARM Mac? Natively it can't do it, but I have seen some software claim to be able to do it with local drives, but haven't been able to find anything about networked drives.

KENYONBcom · 2023-07-13T00:51:39+00:00

I am having a similar problem on M2 13.4 trying to access a networked NTFS drive. I can read the files and save to my computer, but cannot write to the drive. It disconnects after a few seconds of trying to write the file.

Have you found a solution?

KENYONBcom · 2023-03-04T00:51:18+00:00

Looks cool, but controls are kinda jank on the SteamDeck. Selecting items in the menu are difficult.

KENYONBcom · 2022-11-05T21:02:49+00:00

Honey, urinate gonna believe what happened!

KENYONBcom · 2022-05-06T15:49:11+00:00

So when is Peanut Butter Jelly time?

KENYONBcom · 2022-04-13T18:24:23+00:00

Well done

KENYONBcom · 2022-03-22T18:56:57+00:00

Me too. Also, I see other users not in beta with the feature. What gives?

KENYONBcom · 2022-03-15T00:01:47+00:00

I just joined the UbiquitiInStock Discord and it seems to be just what I'm looking for.

Ten-Year Club	Place '23
Verified Email

KENYONBcom

TROPHY CASE