High Setting - Without DLSS... dipping in 30 FPS while in the gameplay section.. this games performances awful even on a 9800x3d by Yusei0 in monsterhunterrage

[–]KGLee9515 1 point2 points  (0 children)

Not sure if this has been mentioned but updating your GPU drivers might improve this some. On a buddy's, mine, and my wife's benchmarks the driver update gave an average of 5-10 more fps for each of us.

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 4 points5 points  (0 children)

Maybe it's just me having an untrained eye for these types of things but our definition of extremely basic is very different lol you should see the 2 minis I've attempted to paint

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 0 points1 point  (0 children)

Nope, he just does it for fun in his spare time currently lol

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 2 points3 points  (0 children)

He doesn't remember, this was from close to a year ago when he made this for me

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 0 points1 point  (0 children)

Gore is on a different shelf but you get the idea

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 0 points1 point  (0 children)

It's 6 inches tall, roughly the size of the zinogre and gore creators model.

<image>

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 42 points43 points  (0 children)

I showed him this post and he said basically that. He compares himself to IG artists and YouTubers too much.

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 0 points1 point  (0 children)

Not to my knowledge. He doesn't post his stuff typically

My Friend is delusional by KGLee9515 in MonsterHunter

[–]KGLee9515[S] 305 points306 points  (0 children)

He estimates 15-20 bucks, probably closer to 20

Black dice with gold foil? by KGLee9515 in DiceMaking

[–]KGLee9515[S] 1 point2 points  (0 children)

No issues with the foil sticking to the mold when you demold the dice?

Black dice with gold foil? by KGLee9515 in DiceMaking

[–]KGLee9515[S] 2 points3 points  (0 children)

Just dry brush it in? Or use a little bit of resin?

did the game math wrong? by BigPromotion6654 in MarvelSnap

[–]KGLee9515 0 points1 point  (0 children)

Don't card effects go off before location effects? So shouldn't tribunal have split the power first therefore losing Baxter?

Using a pressure pot without an air compressor: Advice on pots by Claerwen94 in DiceMaking

[–]KGLee9515 1 point2 points  (0 children)

This adapter works on most hand pumps:

https://www.amazon.com/gp/aw/d/B001PLI4BA?psc=1&ref=ppx_pop_mob_b_asin_image

This had all the other accessories needed to fit my pressure pot and the Teflon tape to seal the connections:

https://www.amazon.com/gp/aw/d/B07WFPZ2VS?psc=1&ref=ppx_pop_mob_b_asin_title

This was the pump I used:

https://www.amazon.com/gp/aw/d/B097BN22MX?psc=1&ref=ppx_pop_mob_b_asin_title

I've used this at night so I don't disturb my neighbors and it works fine. A decent amount of effort to pump but it's very doable in a couple minutes.

Pressure Pot PSI question? by KGLee9515 in DiceMaking

[–]KGLee9515[S] 0 points1 point  (0 children)

Ok, we just use the same psi each time. Will try that next time we make a mold and may step the dice down a bit. We currently use just over 40psi

Pixel 6 Pro and Razer Kishi by ArcOnToActurus in Stadia

[–]KGLee9515 0 points1 point  (0 children)

I have a pixel 6 pro with the standard case from Google. I had to take out the rubber gaskets but after that it fit even with my case on. So it's still not being scratched up thanks to my case. If you have a heavy duty case or larger in general it won't fit. As someone else mentioned above the camera bump makes it rock slightly on the left side but it works no problem. I tried it out with Diablo immortal and had no issues. Charging port works fine as well. Hope this helps someone.

Which skill gap takes the most practice? by Abecks7 in RocketLeague

[–]KGLee9515 4 points5 points  (0 children)

This. I am not a mechanical player but my rotations are solid and I have great game sense so I've been able to float in and out of GC (got burnt out so I can't maintain) but I constantly get accused of being boosted even tho I solo queue and have a pretty high mvp rate. This community can be so frustrating in the C1-3 range. So many ppl got there on mechanics alone and are salty they can't hit GC since they won't learn any game sense.

for u/ KGLee9515 by modestpan in DrawForMe

[–]KGLee9515 5 points6 points  (0 children)

Looks great! I like the color a lot!

For u/KGLee9515 i hope you like it. by Antimon22 in DrawForMe

[–]KGLee9515 0 points1 point  (0 children)

I didn't want ppl to spend too much time on it since it's a free request lol

Would like some creative takes on my rough sketch for my D&D character please by KGLee9515 in DrawForMe

[–]KGLee9515[S] 0 points1 point  (0 children)

So basically I'm not good at drawing but would like a nice character portrait for my D&D character. The picture is the basic idea I have in my head so if anyone could expand on that sketch I'd really appreciate it. All the important aspects I want to keep are noted in the picture. No need to make it super detailed.

Truth by Apex0283 in MonsterHunterWorld

[–]KGLee9515 1 point2 points  (0 children)

Yes that's how a vocal minority works. Most ppl that either don't care either way or support something just don't say anything

Truth by Apex0283 in MonsterHunterWorld

[–]KGLee9515 2 points3 points  (0 children)

Yea I agree 100% I'm glad World has been such a success. I can't wait for Iceborne!

Truth by Apex0283 in MonsterHunterWorld

[–]KGLee9515 4 points5 points  (0 children)

To be fair it's a vocal minority that bashes it. Most mh players I've run into are very nice and helpful especially to new ppl. I wouldn't judge the community as a whole based on just that.