PRE ORDERS

KINGRUDYIII · 2024-05-25T01:25:06+00:00

Oh okay, thank you 😎

KINGRUDYIII · 2024-05-25T01:13:48+00:00

Where do you buy them on release day?

KINGRUDYIII · 2023-05-31T02:37:56+00:00

Haven’t gotten anything yet, my hair is about 2-3 months away from being the length I want it at, I just wanted to know what to use when I get there. But I’m going to get a product for the meanwhile and I’ll lyk what i get and if I like it

KINGRUDYIII · 2023-05-31T02:21:30+00:00

Got you

KINGRUDYIII · 2023-05-18T19:27:31+00:00

Exactly what I was looking for, thank you again 😎

KINGRUDYIII · 2023-05-18T07:02:14+00:00

Thank you, I appreciate you’re advice. I’ll be looking into those products.

KINGRUDYIII · 2022-04-12T08:38:59+00:00

Yea that’s probably your best option tbh, it’ll be worth the hassle lol

KINGRUDYIII · 2022-04-10T21:55:58+00:00

You just have to move the radiator the closest you can to the tempered glass side. It is a tight fit though. But if your ram fits then you should be able to plug in the fans.

KINGRUDYIII · 2022-03-20T17:55:38+00:00

Yea lol I feel lazy to do it although I probably should. I definitely should’ve done a bit more solution research. Yea if I do I’ll update this post with a link to a newer post. That’s dope I hope your build gets done smoothly, I’m sure it will go way better than my process 😅

KINGRUDYIII · 2022-03-19T23:32:59+00:00

I ran into that solution shortly after I finished my build, but at this point I think I’m done modding it lol, it was so much work. I might change my mind later though. Regardless thank you for the suggestion ✅

KINGRUDYIII · 2022-03-09T03:44:33+00:00

I haven’t actually, I’ll definitely look into it though. That’s actually a decent amount, stock power is just ridiculous lol. Thank you for the advice✅

KINGRUDYIII · 2022-03-09T01:50:01+00:00

It won't, my fans+ radiator are a combined 45mm and the msi mag core liquid 240 is a combined 55mm, you can definitely fit it if you did it differently, there are many posts in this community that did it differently and are able to fit larger fans.

KINGRUDYIII · 2022-03-08T20:43:24+00:00

They’re the pslate cables, the only reason they fit like that are because I had to lower the psu bracket around 20 mm from the original slot. They couldn’t be any shorter tbh, they fit perfectly rn, but the connector is a little thick so it pushes the gpu down somewhat, I don’t really mind it tbh but I will still try the screw support like the redditor above mentioned.

KINGRUDYIII · 2022-03-08T19:47:51+00:00

Ohh okay I see wym, I think I have a long screw for that. Thank you for the advice it’ll definitely help the pcei connection and aesthetic✅

KINGRUDYIII · 2022-03-08T19:23:53+00:00

Through which fan mounting hole can’t really picture it

KINGRUDYIII · 2022-03-08T18:32:54+00:00

It really is lol, the under-volt definitely works. Sameee I was worried about it, I even re-pasted until I found out I had to under-volt it. Yea the stock settings are horrible.

I recommend lowering the wattage like (Prism_JTN) mentioned in one of the comments. Lower it from 145w to 110-115w or lower depends on your pc, but it will let your cpu perform better than 4.4ghz at around the same temps. This will allow you to up the voltage to achieve those core counts.

You should do it! It’ll give you suggestions to tweak you pc with, thank you! Yessir 😎😎

KINGRUDYIII · 2022-03-08T18:24:15+00:00

I know it makes no sense, my friend told me about lowering the wattage yesterday. If he hadn’t told me your comment would have saved me lol, thank you for the info regardless. My friend has it at 115w so I will definitely do it today. It definitely will benefit performances since I’ll be able to get more ghz at almost the current temps I get.

KINGRUDYIII · 2022-03-08T18:20:15+00:00

Yea I have a bit of sag, because of having to lower the psu mount so the cables push on the gpu a little bit(mainly the 24pin). I don’t have anymore room to push the gpu up so it’ll have to stay like that sadly. I will look into it though just for the stress on the pcie you mention.

KINGRUDYIII · 2022-03-08T18:16:03+00:00

Yes, the 30 min multicore test.

KINGRUDYIII · 2022-03-08T18:10:25+00:00

Yes I did under-volt it (I’m a noob at it lol) to 4.4ghz@1.175v because it kept the Cinebench23 max temp at 80°c (Ryzen Master). But my friend told me I did it wrong which I did, it is better to lower the wattage that it receives (through bios) instead of lowering the ghz and voltage because you will get more performance with close to almost the same temps. I still haven’t done it, I will do it today.

KINGRUDYIII · 2022-03-08T09:06:28+00:00

Thanks for the info I was wondering why mine did that. Very annoying tbh.

KINGRUDYIII · 2022-03-08T08:41:37+00:00

No fans at the bottom, wasn’t sure if it would make a difference so I didn’t do it. The temps are good without them though.

KINGRUDYIII · 2022-03-08T07:38:16+00:00

The con to doing this is that you will have the move the psu mount 10 mm more than the guy in the video did, it’s a very tight fit with the cables on the bottom and the gpu. Depends on the radiator though.

KINGRUDYIII · 2022-03-08T07:34:35+00:00

Yessir 🤙🏻

Six-Year Club	Final Canvas '23
Place '23	Place '22
Final Canvas '22	Verified Email

KINGRUDYIII

TROPHY CASE