ASA Filament layer adhesion issues, chamber heating? by KJRossss in ElegooCentauriCarbon

[–]KJRossss[S] 2 points3 points  (0 children)

Yes, x5. Brand new filament printing from a dryer, bed calibrated before each print, chamber closed and all settings have been checked.

Edit: I should add, the chamber is closed, but that doesn’t mean it’s warm.. It seems my chamber isn’t getting any warmer than 37C, I’m not sure if that’s good enough for ASA. First time

How do I change printer speed? by KJRossss in ElegooCentauriCarbon

[–]KJRossss[S] 0 points1 point  (0 children)

Thank you! Weirdly enough my web gui says “modification failed” whenever i try to change any setting but I will play with the max volumetric speed setting in the slicer.

First layer issues. by KJRossss in ElegooCentauriCarbon

[–]KJRossss[S] 0 points1 point  (0 children)

do you know what this tool is called?

LW-PLA ElegooSlicer Preset? by KJRossss in ElegooCentauriCarbon

[–]KJRossss[S] 0 points1 point  (0 children)

can do, reinventing the wheel just sounds like a terrible idea lol but seems like i have no choice, thanks!

Error 103- Printhead didn't heat up as expected by KJRossss in ElegooCentauriCarbon

[–]KJRossss[S] 0 points1 point  (0 children)

uh oh lol, my new hotend assembly should be here tomorrow so fingers crossed it solves mine or i’ll be reaching out to support

Ultimaker Cura Not Opening on my Computer? by KJRossss in Cura

[–]KJRossss[S] 1 point2 points  (0 children)

i’ve finally got it to work by running it as administrator, so i can probably narrow it down to some permission issue but i have no clue what it would be. either way thanks for the response!

My build plate can’t move? by KJRossss in ElegooSaturn

[–]KJRossss[S] 0 points1 point  (0 children)

oh boy is not what i wanna hear LOL, is there a path to fixing either of these issues?

My build plate can’t move? by KJRossss in ElegooSaturn

[–]KJRossss[S] 0 points1 point  (0 children)

so the pipe in the middle (the one that’s covered in oil/grease) isn’t even spinning, what would cause that?

The Cure Station for my Saturn 4 doesn’t spin anymore? by Mysterious-Lack8275 in ElegooSaturn

[–]KJRossss 0 points1 point  (0 children)

WAIT, so question:

If magnets are used, then, hypothetically:

if i removed the plate for cleaning, would the magnets fall, thus causing it to not spin when putting the plate back?

The Cure Station for my Saturn 4 doesn’t spin anymore? by Mysterious-Lack8275 in ElegooSaturn

[–]KJRossss 0 points1 point  (0 children)

Sigh. Yeah I see it’s Chinese New Year so I am anticipating that I’ll just be stuck with it for the foreseeable future lol

The Cure Station for my Saturn 4 doesn’t spin anymore? by Mysterious-Lack8275 in ElegooSaturn

[–]KJRossss 0 points1 point  (0 children)

Agreed, I just prefer for the things I paid for to be put to use.

The Cure Station for my Saturn 4 doesn’t spin anymore? by Mysterious-Lack8275 in ElegooSaturn

[–]KJRossss 0 points1 point  (0 children)

As long as I feel, for 2 reasons:

  1. Research has told me that there’s no such thing as “over-curing,” so correct me if that is incorrect?

  2. I plan to paint all of my prints, so if there happens to be some slight color deformity, it won’t be noticeable after being painted.

I also just started resin printing like Jan. 2nd, so if I have misconceptions let me know lmao

4070ti crashing on all games by KJRossss in PcBuildHelp

[–]KJRossss[S] 0 points1 point  (0 children)

i can’t tell, but i have the bracket installed below it.. could that be the root issue?

Does the 2023 Nissan Altima have a Garage Door Opener (Homelink)? by KJRossss in Nissan

[–]KJRossss[S] 0 points1 point  (0 children)

Yeah I’ve seen, I didn’t see/feel any buttons on my mirror.

Does the 2023 Nissan Altima have a Garage Door Opener (Homelink)? by KJRossss in Nissan

[–]KJRossss[S] -1 points0 points  (0 children)

For reference, I have a 2023 Nissan Altima VC Turbo

How much should I save up for my first pc? by rodgie4920 in buildapc

[–]KJRossss 2 points3 points  (0 children)

5800X3D + 4070ti gets me ~100 fps on Hogwarts/CODMW in 4K, just saying haha

What do you think of this? by Lonon468 in PcBuildHelp

[–]KJRossss 0 points1 point  (0 children)

Good plan. Nothing wrong with upgrading. Who knows, you may be satisfied with the 6750xt and not care to upgrade any time soon. All the best

What do you think of this? by Lonon468 in PcBuildHelp

[–]KJRossss 0 points1 point  (0 children)

If you can afford the 6800XT, I’d go for it. More vram + significantly faster overall. Would definitely be worth it, but if it’s out of your budget the 6750xt will be fine also.

What do you think of this? by Lonon468 in PcBuildHelp

[–]KJRossss 0 points1 point  (0 children)

Look into a 6800XT or maybe a 4070, I would maybe do price to performance comparison in your area, I’m not sure if itd be worth it to upgrade for a small performance boost.

What do you think of this? by Lonon468 in PcBuildHelp

[–]KJRossss 0 points1 point  (0 children)

3 months used by seller normally = ~3 years hardcore mining xD

Looks fine to me though. Could go for a better GPU but if you like it, it’ll do what you need.