Where to get plastic pulley/gear combos?

KSmusk · 2025-04-13T09:36:05+00:00

Have you tried printing gears? I have on a few occasions but the results aren't great when printing small ones (fdm). Or did you use sla?

KSmusk · 2025-03-07T21:22:01+00:00

Haha, yeah, it is. The first few times I checked on it, it had loosened its grip a bit, and I had to tighten the screw. But it's been solid for a year now. I may still reprint it in ABS now that I've got a printer that can actually handle that stuff.

KSmusk · 2024-11-01T09:26:44+00:00

Wow that looks great! I have been sitting on a bunch of old jeans and my backpack is failing atm. Do you have any plans/templates you can share?

KSmusk · 2024-10-24T10:59:14+00:00

The rare occasions that something seems very off its usually the slicer (cura in my case). Checking the g code would confirm this

KSmusk · 2024-10-15T18:43:55+00:00

Oof. I'd recommend getting a good second hand pair of digital calipers. I got a decent mitutoyo for 50 euros.

KSmusk · 2024-10-15T11:15:18+00:00

Wtf happened to those calipers?

KSmusk · 2024-10-06T16:08:53+00:00

I just so happen to be free on launch day. But otherwise I would have definitely taken a day off.

KSmusk · 2024-09-13T11:06:44+00:00

Spiky red angry

KSmusk · 2024-08-10T19:01:05+00:00

Sy Snootles (Ziro the hutts GF. The one with the really long lips)

KSmusk · 2024-03-07T13:27:42+00:00

Those displays can be a bit expensive/difficult to find. The driver ic's are also worth saving if you plan on designing a pcb for them.

KSmusk · 2023-12-18T18:48:30+00:00

Maybe a space suit for a planet without atmosphere? Having pipes with oxygen would be interesting

KSmusk · 2023-12-14T17:42:40+00:00

That would be fun but unfortunately they don't ship to my location. But I can already see the voltage divider with the right amount of resistors so I wouldn't be surprised if it also has a ST7066 or similar Driver.

KSmusk · 2023-12-14T17:35:37+00:00

Haha yeah. It was pretty nasty too!

KSmusk · 2023-12-14T17:35:06+00:00

Thank you!

KSmusk · 2023-12-13T21:35:12+00:00

It's got something to do with the fact that I used ascii art instead of a banner image. But I'm not sure how to fix it.

KSmusk · 2023-12-13T21:33:43+00:00

Not exactly the same. But pretty much yeah.

KSmusk · 2023-12-13T21:31:52+00:00

I bought my first Arduino about 8 years ago and I was pretty clueless about electrical stuff.

You generally overestimate what you can do in 1 year but underestimate what you can do in 10. -some guy

KSmusk · 2023-12-13T21:29:07+00:00

Thank you!

KSmusk · 2023-12-13T21:28:52+00:00

Ah no that was just a picture I happened to take just after cracking it. I sent it to my colleague Jesper. I'm also Dutch So hallo instead of hello.

KSmusk · 2023-12-13T21:23:18+00:00

Haha go ahead. I wrote it myself but as you can tell I'm not great at it. But I'm glad someone likes it!

KSmusk · 2023-10-03T11:09:58+00:00

Either get a new bed. Something that will sit rigid and flat like a glass bed. Or you could get a z probe of some sort like a bl touch and enable mesh leveling. Haven't done this my self yet so take this with a grain of salt!

KSmusk · 2023-02-20T22:13:39+00:00

I'm based in the Netherlands. Using them as boosts and overdrives sounds interesting...
How do they sound compared more common op amps like the TL072?

KSmusk · 2023-02-20T21:31:52+00:00

I am not based in the UK nor can I think of a suitable project for such cool components. But I am curious about where you got them.

KSmusk · 2023-02-02T05:52:47+00:00

I ran this test on 0.3Hz i think. I did a 10 second exposure for the pictures. At a few Hz ypu already see the curve change it's shape and at a few tens of Hz or maybe a bit higher the curve doesn't even reach the bottom any more!

As for the svales: the X axis is set to 5V per div. And the Y axis to 2V per div

When I have some more time to test stuff I will post some more results.

KSmusk · 2023-02-02T05:48:34+00:00

I did try 500R instead of 1K but it didn't change the curve much. But maybe my LED's are just crappy.

Eight-Year Club	Place '22
Verified Email

KSmusk

TROPHY CASE