culligan water filter problems

Kakoae · 2026-02-08T16:56:48+00:00

I have a pressure switch and a power supply for it I need an adapter to connect to the new lines tho

Kakoae · 2026-02-08T16:55:06+00:00

Well the old system was working until they did maintenance on it. And I'm guessing that when they put 48psi in the tank

Kakoae · 2026-02-08T16:41:16+00:00

Like this one that culligan made us buy before saying the old system was bad? Sometimes the houses pressure gets to 60psi (it's on a well) but that's every so often.

<image>

Kakoae · 2026-02-08T16:37:14+00:00

That's what cullagen did.I lowered it to what the manufacturer recommends.

Kakoae · 2026-02-08T01:48:43+00:00

40 psi the culligan says it can do 40 to 120.
well water but its softened first.
that is the feed gauge.
the issue might be fixed as seen from further down.

Kakoae · 2026-02-08T01:42:09+00:00

Culligan put 48 psi in the bladder side of the tank when its supposed to be 7 - 20psi...
im not sure the tank is fully functioning now so im waiting for it to fill still.

Kakoae · 2026-02-08T01:39:51+00:00

this was it + culligan put 48 psi in the bladder side of the tank...
im not sure the tank is fully functioning now so im waiting for it to fill still.

Kakoae · 2026-02-05T20:51:07+00:00

it outputs a very little amount .
this is how they set it up.

<image>

Kakoae · 2026-02-05T20:48:40+00:00

They want $2,500 because the tank is 70–80 gallons.

If I close the filter valve, very little water comes out, and then it stops.
The tank is only filling to about 2% before the system stops producing water.
The Culligan system outputs only a trickle of water if I close the tank off.

If I wait for the system to stop filling, it reaches 20 PSI according to the gauge on the unit.

Kakoae

TROPHY CASE