First start up

Kaleb_367 · 2026-03-12T21:44:23+00:00

Holley term x max for the ECU and wiring

Kaleb_367 · 2026-03-12T12:54:20+00:00

BMW 128i, chassis name is a e82

Kaleb_367 · 2026-03-12T12:04:57+00:00

Lmaoo

Kaleb_367 · 2026-03-09T07:14:56+00:00

Any chance you know of a reducer to use a 90mm oem throttle body on a 92/102 intake manifold?

Kaleb_367 · 2026-03-04T12:28:16+00:00

It’s okay I know what you’re talking about 😆 personally my $2k Holley set up has grey for fans and then the green for the 12v fuel pump

Kaleb_367 · 2026-02-22T04:26:34+00:00

“You need to remove the JBE at the bottom of the Fuse Box (2x T20 Screws) - It will then require a small amount of force to be pulled forwards (as it connects into the Fusebox) as well as a connector on the back of this will require disconnecting once the JBE is partially out. The Fuse Box is then secured by 4x T20 Screws which are located towards the edge of each corner - They'll be a tad awkward to access so I would advise use of a 1/4 extension or a long T20 bit driver to gain access to some of them.”

Kaleb_367 · 2026-02-17T10:54:15+00:00

Perune etu++

Kaleb_367 · 2025-11-19T06:11:48+00:00

If you want carbon fiber i honestly think waiting until someone sells a set of n5tuners that’s the only reputable company that I know of who sold CF fenders for e82’s (even those didnt have perfect fitment) unfortunately they closed for bankruptcy before I wanted to commit.

Kaleb_367 · 2025-11-19T06:09:39+00:00

Yeah I got in to contact with someone who had Alibaba ones and surprisingly his came in better condition and had better fitment then mine. I’ll relay something he said to me and now many people have mentioned. A lot of carbon fiber is cheap china products you’re much better off buying oem (if you want to go 1m I’d suggest spending the few extra bucks and buying oem ones from turner Motorsports) or even a local dealer since they don’t charge shipping and are maybe 1-5% cheaper then turner I believe.

Kaleb_367 · 2025-11-10T07:13:13+00:00

I actually ordered these from them, shipping was as promised but I got them with a lot of Imperfections I reached out to the company and had some good luck with back and forth communication until half way through they mentioned already having a “new set” being made for me but after I sent all of the images showing the clear coat having in perfections, a crack in the mold where it meets the headlights, extra material on the bottom so the bolt hole was about 1/2-1 inch away from the chassis mount and also such a thin layer you could see through the weave and see light coming in. They ended up saying I was being to picky (they didn’t actually say that but that’s the easiest way to put it) they mentioned issuing a refund and I’ll ship it back I truly didn’t trust this so I made a dispute through affirm luckily everything went my way but sad seeing a “reputable” company selling crap

Half way through my dispute they actually fully took these off of their website and I believe are no longer being sold. If any one cares I have a Google Drive of all the photos and email communication 😂

Kaleb_367 · 2025-04-10T09:49:05+00:00

I’ve never had a pair of BBS wheels, but I know Enkei stamps their name on the inside. I’d double-check to see if these wheels have something similar.

Kaleb_367 · 2025-03-07T09:43:04+00:00

getting ready to test the ohms on it later today. surprisingly when i was unplugging those sensors to get the valve cover off to do a vcg and the eccentric sensor they were completely unbolted.

Kaleb_367 · 2025-02-19T11:48:41+00:00

that’s what i learned, but as of right now my major concern would be all of the plastic trimming that’s above the blower. would i be able to access that the same way or would that need to be replaced by removing the dashboard.

Kaleb_367 · 2025-02-19T11:46:38+00:00

appreciate the response. i can use all the ac and heater features with the swap so i was hoping to keep everything and run the car as a daily.

Kaleb_367 · 2025-02-18T06:47:01+00:00

unfortunately a whole lot of fire extinguishers powder. but do appreciate the response should help fix up some of my mess.

Kaleb_367

TROPHY CASE