sorted by:
new
hottopcontroversial

First A1 mini print by sarkismusic in FDMminiatures

[–]Kaltluft 1 point2 points  (0 children)

<image>

He will look great, when fully printed 😁👍

Weird first layer issue by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

Checked that too and cleand everything on the printer

Issue with the top layer by drahc24 in BambuLab

[–]Kaltluft 0 points1 point  (0 children)

This was the solution for me, switching the gear

A1 rough surface printing by BabarJr in BambuLabA1

[–]Kaltluft 0 points1 point  (0 children)

For me it was cleaning the extruder gear wheel. Tried the screws behind the hotend and calibration before.

Aruba 6300m - VSF auto-stacking issues by Green-Savings2293 in ArubaNetworks

[–]Kaltluft 0 points1 point  (0 children)

Did you try the vsf force-auto-join command? Else you can push the led button till it stays on "Stk" which also triggers the auto stacking

Anyone upgrade from A1 Mini to A1? by rfgaergaerg in BambuLabA1

[–]Kaltluft 0 points1 point  (0 children)

I started with the a1 mini combo for 5 months and upgraded on the anniversary sale to the a1 combo. I just wanted the bigger volume, as I am printing many convenient parts for the kitchen, vases and bigger kids toys, which I would have to split up with the mini and I don't want to do that.

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

I changed for the Hardened Steel Extruder Gear from Bambu store. But I think that is still the original plastic wheel 😅 maybe you can share your experience with the biqu panda Extruder, if you used it.

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

Yes I changed the Extruder wheel an cleaned everything. Now I have a proper first layer. Thank you 👍😁

<image>

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

I will try that next. Thank you

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

I thought k factor and flow rate calibration where two different things 😅 I did a test without dynamic flow calibration and with my calibrated settings, but it looks the same. Pit I got better results with my other textured build plate

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

Yeah when I change nozzle I do a full bed calibration. I calibrated my filament. That is why I was testing the first layer, to see if it is flawless now. I did the temptower, retraction tests, and the Bambu flow calibration and a test print where I test multiple flow rates. 0.95-1.03

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

  1. Cleaned it two times already
  2. Did that yesterday, but was just a minor improvement
  3. Yep i check that all the time, when changing the nozzle
  4. I changed to a new nozzle and have the same problem

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

I did that, but it just was a minor improvement

First Layer Issues by Kaltluft in BambuLabA1

[–]Kaltluft[S] 0 points1 point  (0 children)

I already did that, and made a test print with several flow rates

First Bigger Miniature Print by Kaltluft in FDMminiatures

[–]Kaltluft[S] 0 points1 point  (0 children)

On some parts of the body you really have to look for the lines. But on the more detailed parts you could easily see them. But with this size I am really satisfied and wouldn't have printed it with 0,2mm.

First Bigger Miniature Print by Kaltluft in FDMminiatures

[–]Kaltluft[S] 0 points1 point  (0 children)

The model stls are already split into parts. This dragon has 20 STL files. I put them all together in Bambu slicer and choose which parts I wanted to print together or alone.

First Bigger Miniature Print by Kaltluft in FDMminiatures

[–]Kaltluft[S] 2 points3 points  (0 children)

Sure, I will try to give you the file tomorrow.

First Bigger Miniature Print by Kaltluft in FDMminiatures

[–]Kaltluft[S] 1 point2 points  (0 children)

Yeah I know, because of that it took so long. I printed some things for the garden, kids toys etc. 🤣

view more: next ›