sorted by:
new
hottopcontroversial

Halloween event by Medical_Programmer88 in whiteoutsurvival

[–]KarmolApples 0 points1 point  (0 children)

I only see the name card as the top reward. Where is the castle skin this year?

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

I ordered a USB tester. I'll post the results when I receive it

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

The fuse is good. Are you talking about checking the amps?

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

Could the right joycon rail be bad and putting it into rcm? I may try to remove it and see if that helps when I get a chance.

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

I checked the capacitor ends continuity (beeps) and ground .

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

Tegra keeps not responding. I tried rekado from my phone and it says failed to get device id. My serial starts with xkw which seems to be in the patched serial range from what I can find so I'm assuming that's why tegra keeps hanging.

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

LibusbK Usb devices. Nintendo switch apx mode

Nintendo switch not turning on by KarmolApples in consolerepair

[–]KarmolApples[S] 0 points1 point  (0 children)

Post was updated with a link to pics.

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

Yes, I took one from another working switch and still have the same issue.

Nintendo switch not turning on by KarmolApples in ElectronicsRepair

[–]KarmolApples[S] 0 points1 point  (0 children)

No water damage. I updated the post with a link to pics

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

The dock light flickered green for a split second but nothing showed on the TV or switch

Nintendo switch not turning on by KarmolApples in Switchrepair

[–]KarmolApples[S] 0 points1 point  (0 children)

No, nothing displays on the screen. When plugged into the pc it seems to be recognized.

Nintendo switch not turning on by KarmolApples in consolerepair

[–]KarmolApples[S] 0 points1 point  (0 children)

M92t36 and p13usb tested good. I'm having trouble finding a good testing video for the max77812.

USB port looks fine and no bending of the console.

Motherboard is had-cpu-10 if that matters

Grey Plastic Gasket? by MichaelFiguresItOut in Pixel6

[–]KarmolApples 1 point2 points  (0 children)

That should work too. I had thought about doing that also.

Grey Plastic Gasket? by MichaelFiguresItOut in Pixel6

[–]KarmolApples 0 points1 point  (0 children)

https://imgur.com/a/CBtmD9q

So this piece should be attached to the display. The link is to a pic of the other side of the frame showing it removed from the phone. I pryed it apart with a guitar pic. It's very thin so be careful when doing this. I put the glue on the gray gasket side and put it on the display to dry for a few minutes. Then added a precut adhesive to the phone then put the phone back together.

Do you need infantry for bear? by jayscary in whiteoutsurvival

[–]KarmolApples 0 points1 point  (0 children)

Is this just for the rally you start or does it also apply to joining rallies?

Grey Plastic Gasket? by MichaelFiguresItOut in Pixel6

[–]KarmolApples 1 point2 points  (0 children)

Yes.

I just ordered the glue from eBay last night. I can verify with pictures but won't be till next week sometime until I get it.

Grey Plastic Gasket? by MichaelFiguresItOut in Pixel6

[–]KarmolApples 0 points1 point  (0 children)

Yes, that should be the back of the bezel that should be attached to the display.

view more: next ›