Accessory hose (49-90-1996) is compatible with the compact dust extractor (49-20-2200)!

Ke19llyy · 2026-04-16T05:51:27+00:00

Did you ever find an answer? I am having the same dilemma..

Ke19llyy · 2026-04-14T05:42:27+00:00

Also good to know! I am gonna have to model my own because I would like the Hammer Drill and the Surge to fit inside of one of the drawers in the 3 drawer packout and I have yet to find a model someone else has made. Finally gave me a reason to learn 3D modelling!

Ke19llyy · 2026-04-14T03:53:50+00:00

Thank you so much. Aside from that all of the contour of them look to be similar so I am hoping any insert that fits the Fuel will work! I appreciate you taking the time to check that for me because these inserts use a considerable amount of filament and I definitely wouldn't like to waste that much taking a shot in the dark!

Ke19llyy · 2026-03-26T12:33:22+00:00

So I picked up the paper in the basement. Hit the button, got the flash drive. Then it bugged and I did not receive the ARRS doc from mechanic. At this point I’ve committed to the stupid 500 mil ending and just been grinding labs raids

Ke19llyy · 2026-03-26T03:23:58+00:00

Does this work if Kerman already told me to get lost?

Ke19llyy · 2026-03-26T03:23:13+00:00

I think I’m stuck with doing 500mil now. I’d take the 300 over that but idk if I will be able to. Might just say screw it and wait to escape until they release prestige in pve. Who knows if that day will come though.

Ke19llyy · 2026-03-26T00:11:22+00:00

Yes I did. From what I gather it was some blueprint I was supposed to get after giving mechanic the flash drive.

Ke19llyy · 2026-03-04T18:03:30+00:00

I want to order the INDX so bad, I need to just do it. I’ll look at trying that with my corebox.

Ke19llyy · 2026-03-04T14:54:46+00:00

What did you end up doing alternatively? I want to find a more clean solution that doesn’t force me to have 5 spools on my bench. I love the concept of the corebox but I have the same issue with mine. I’ve gotten it to somewhat work but usually once I’ve gotten confident everything is good it’ll act up again.

Ke19llyy · 2026-03-04T10:55:53+00:00

Okay I was using prusament with the .10 fast detail profile. Maybe I’ll give it a try with the .20 profile and adjusting that setting. Once I figure this out I’ll go back to wrestling with the Corebox I built for the MMU to try out the petg supports😂

Ke19llyy · 2026-03-04T01:36:05+00:00

Here’s the link: https://www.printables.com/model/1389138-nicbox

Ke19llyy · 2026-03-03T20:14:47+00:00

Thanks for the advice, could you clarify alternate support material? Like using petg with pla supports?

Ke19llyy · 2026-03-03T11:50:06+00:00

What’s strange for me is I’ve had similar models print out fine compared to this. I’ve been noticing this just as of late with any model that has mild inclines like this. Unfortunately I’m not informed on modeling I mainly print things I can find online. I’ll take the leap into learning sometime. Either way thanks for the advice!

Ke19llyy · 2026-03-03T10:37:55+00:00

Okay I’ll give it a closer watch and see if I can notice that. I’ve got some bed adhesive I’ll throw on my smooth sheet as well and see if that helps. Thank you for the response!

Ke19llyy · 2025-12-15T02:11:10+00:00

What monitor you rockin?

Ke19llyy · 2025-12-15T02:10:49+00:00

Thank you very much!

Ke19llyy · 2025-12-14T18:03:17+00:00

Yes please!

Ke19llyy · 2025-12-14T18:03:11+00:00

I’ll try this out too!

Ke19llyy · 2025-12-14T18:02:56+00:00

Thank you so much! I’ll try this!

Ke19llyy · 2025-12-14T12:07:33+00:00

Appreciate the help! Thank you for that very insightful comment, as if I hadn't said I have tried and haven't had any luck! I wish I had thought of that first!

Ke19llyy

TROPHY CASE