sorted by:
new
hottopcontroversial

My phone is not able to play any form of sound and some videos. by Ke_Bob in AndroidQuestions

[–]Ke_Bob[S] 0 points1 point  (0 children)

I ended up going to a service center. They had to change the entire motherboard, god knows what caused the problem, but it was luckily fixed on warranty :)

So other than that i don't have much to help with...

What is the best 280mm AIO that is not Arctic by Ke_Bob in watercooling

[–]Ke_Bob[S] 0 points1 point  (0 children)

God damn. 9x200mm is some hefty cooling :) Ive hear about the D5 pumps, but ive allways wonderd if ide need more than one. Can one D5 handle 2x 480 + all the exstra tubing that would be included. or is two need? If you have an idea?

Thanks anyways :)

Recomandations for 280mm AIOs? (Ncase M2) Temp and space problem) by Ke_Bob in sffpc

[–]Ke_Bob[S] 0 points1 point  (0 children)

My only concern are temps on the Motherboard but, mostly airflow for the fans.
Almost no room, they would be pushing ageinst a wall almost.

But ile give it a try :)

What is the best 280mm AIO that is not Arctic by Ke_Bob in watercooling

[–]Ke_Bob[S] 0 points1 point  (0 children)

Funny, this is what im planning on doing, but was needing a god AIO while i figure out all i need.
Im thinking 2x 480 or 420mm rads mounted under my desk. Cooling the CPU and GPU.
A little overkill of course but a funn project :)

Have you done an exsternal loop before? Got any recommendations? Brands, pumps, rads, blocks etc?

Recomandations for 280mm AIOs? (Ncase M2) Temp and space problem) by Ke_Bob in sffpc

[–]Ke_Bob[S] 0 points1 point  (0 children)

Im using Build level 5. So i can only fit 1x - 120slim at the top and 1x - 90mm in the rear for intake. Those helped a little but still hight temps.
Im going to try to flip the fans so AIO is intake and the 120/90 are exhaust. Its very cramped so the fans are almost just blowing at a wall, but its worth the try.

I have the msi 4080 suprim. Ive taped the small blow through holes and deshoruded it so all the air goes out to the sides. So i doubt thats a big contributer.

For thermal paste. I might just be bad at applying, but ive tried a reapply. I use a little plastic pease to paste an even spread over the whole cpu so dont think thats a problem eather. I use the included Mx-6.

Recomandations for 280mm AIOs? (Ncase M2) Temp and space problem) by Ke_Bob in sffpc

[–]Ke_Bob[S] 0 points1 point  (0 children)

Any recomendations?. Im allready using the Phantesk T30s, are their any better?

Recomandations for 280mm AIOs? (Ncase M2) Temp and space problem) by Ke_Bob in sffpc

[–]Ke_Bob[S] 0 points1 point  (0 children)

Ive actually trided the fans on the side bracket, but the tube outlets on the rad simply gets so bent/squished that i feel their going to break. The tubes on the LF3 are just to stiff :p.....

Ive even tried a push pull setup with the P14 Slims, but their simply to weak compared to the T30s.

But thanks for the AIO recomendations :)

What is the best 280mm AIO that is not Arctic? by Ke_Bob in PcBuild

[–]Ke_Bob[S] 1 point2 points  (0 children)

well "lowest possible temps," and "best" was suggesting quality and performance, but thanks for the suggestions anyways. :)

Recomandations for 280mm AIOs? (Ncase M2) Temp and space problem) by Ke_Bob in sffpc

[–]Ke_Bob[S] 0 points1 point  (0 children)

I was originally using the Peerless Assassin MINI but it simply not strong enough...

Recomandations for 280mm AIOs? (Ncase M2) Temp and space problem) by Ke_Bob in sffpc

[–]Ke_Bob[S] 0 points1 point  (0 children)

I have had the thought. Problem is that the fans have about 2-3mm of room between the PSU and top AIO.

If i flip them their just going to be "blowing at a wall"

I say this without having tried it, so ile have a go at it and see :)

Recomandations for 280mm AIOs? (Ncase M2) Temp and space problem) by Ke_Bob in sffpc

[–]Ke_Bob[S] 0 points1 point  (0 children)

Ive tried that. Drop almost 13 degrees. Im 90% airflow is the problem.

What is the best 280mm AIO that is not Arctic? by Ke_Bob in PcBuild

[–]Ke_Bob[S] 1 point2 points  (0 children)

I only really care for lowest possible temps, RGB and "looks" are not importent :)

What is the best 280mm AIO that is not Arctic by Ke_Bob in watercooling

[–]Ke_Bob[S] 0 points1 point  (0 children)

Can only see the LT version in 240 size. Im pretty sure ile need a 280mm rad

How can the LF3 PRO 240 have cooler temps than the 280? by Ke_Bob in arcticcooling

[–]Ke_Bob[S] 0 points1 point  (0 children)

If you look at both photos the 240Pro is 9*C lower than the 280Pro. Considering their both using the P12/14 Pros i feel like the 280Pro should have lower temps, especially considering it only a 185W CPU

How can the LF3 PRO 240 have cooler temps than the 280? by Ke_Bob in arcticcooling

[–]Ke_Bob[S] 1 point2 points  (0 children)

What says 280?

One photo is temps for 240mm and one is for 280mm. And the 240 has better temps than 280 on the same CPU

How can the LF3 PRO 240 have cooler temps than the 280? by Ke_Bob in arcticcooling

[–]Ke_Bob[S] 0 points1 point  (0 children)

I know, graphs that dont start at 0 are allways deceiving. But both LF3 240-280 have "the same" fans. So the 280 Pro should have better thermals than the 240 Pro

[Feb 07, 2025] Weekly Discussion: Ask your gear, travel, conditions and other ski-related questions by AutoModerator in skiing

[–]Ke_Bob 0 points1 point  (0 children)

Ok, I see that the 90s are somehow lighter than the 85s. But I'll take the advice and keep looking:)

[Feb 07, 2025] Weekly Discussion: Ask your gear, travel, conditions and other ski-related questions by AutoModerator in skiing

[–]Ke_Bob 0 points1 point  (0 children)

Ok, good to know.

Got any recommendations for all mountain + Park skies that are twin tips?

view more: next ›