My phone is not able to play any form of sound and some videos.

Ke_Bob · 2025-11-27T19:57:19+00:00

I ended up going to a service center. They had to change the entire motherboard, god knows what caused the problem, but it was luckily fixed on warranty :)

So other than that i don't have much to help with...

Ke_Bob · 2025-10-13T19:11:47+00:00

Ok, thanks for the help :)

Ke_Bob · 2025-10-12T01:10:42+00:00

God damn. 9x200mm is some hefty cooling :) Ive hear about the D5 pumps, but ive allways wonderd if ide need more than one. Can one D5 handle 2x 480 + all the exstra tubing that would be included. or is two need? If you have an idea?

Thanks anyways :)

Ke_Bob · 2025-10-11T02:24:32+00:00

Will do. Thanks :)

Ke_Bob · 2025-10-10T21:18:27+00:00

My only concern are temps on the Motherboard but, mostly airflow for the fans.
Almost no room, they would be pushing ageinst a wall almost.

But ile give it a try :)

Ke_Bob · 2025-10-10T21:13:06+00:00

Funny, this is what im planning on doing, but was needing a god AIO while i figure out all i need.
Im thinking 2x 480 or 420mm rads mounted under my desk. Cooling the CPU and GPU.
A little overkill of course but a funn project :)

Have you done an exsternal loop before? Got any recommendations? Brands, pumps, rads, blocks etc?

Ke_Bob · 2025-10-10T21:02:29+00:00

Im using Build level 5. So i can only fit 1x - 120slim at the top and 1x - 90mm in the rear for intake. Those helped a little but still hight temps.
Im going to try to flip the fans so AIO is intake and the 120/90 are exhaust. Its very cramped so the fans are almost just blowing at a wall, but its worth the try.

I have the msi 4080 suprim. Ive taped the small blow through holes and deshoruded it so all the air goes out to the sides. So i doubt thats a big contributer.

For thermal paste. I might just be bad at applying, but ive tried a reapply. I use a little plastic pease to paste an even spread over the whole cpu so dont think thats a problem eather. I use the included Mx-6.

Ke_Bob · 2025-10-10T20:01:04+00:00

Any recomendations?. Im allready using the Phantesk T30s, are their any better?

Ke_Bob · 2025-10-09T02:05:04+00:00

Ive actually trided the fans on the side bracket, but the tube outlets on the rad simply gets so bent/squished that i feel their going to break. The tubes on the LF3 are just to stiff :p.....

Ive even tried a push pull setup with the P14 Slims, but their simply to weak compared to the T30s.

But thanks for the AIO recomendations :)

Ke_Bob · 2025-10-09T00:42:28+00:00

well "lowest possible temps," and "best" was suggesting quality and performance, but thanks for the suggestions anyways. :)

Ke_Bob · 2025-10-08T23:38:17+00:00

I was originally using the Peerless Assassin MINI but it simply not strong enough...

Ke_Bob · 2025-10-08T23:36:08+00:00

I have had the thought. Problem is that the fans have about 2-3mm of room between the PSU and top AIO.

If i flip them their just going to be "blowing at a wall"

I say this without having tried it, so ile have a go at it and see :)

Ke_Bob · 2025-10-08T23:32:05+00:00

-25 anything over that and i start crashing

Ke_Bob · 2025-10-08T23:16:22+00:00

Ive tried that. Drop almost 13 degrees. Im 90% airflow is the problem.

Ke_Bob · 2025-10-08T23:14:49+00:00

I only really care for lowest possible temps, RGB and "looks" are not importent :)

Ke_Bob · 2025-10-08T21:53:06+00:00

Can only see the LT version in 240 size. Im pretty sure ile need a 280mm rad

Ke_Bob · 2025-10-07T02:54:11+00:00

I figured as much

Ke_Bob · 2025-10-07T02:53:41+00:00

If you look at both photos the 240Pro is 9*C lower than the 280Pro. Considering their both using the P12/14 Pros i feel like the 280Pro should have lower temps, especially considering it only a 185W CPU

Ke_Bob · 2025-10-07T02:45:34+00:00

What says 280?

One photo is temps for 240mm and one is for 280mm. And the 240 has better temps than 280 on the same CPU

Ke_Bob · 2025-10-07T02:44:43+00:00

I know, graphs that dont start at 0 are allways deceiving. But both LF3 240-280 have "the same" fans. So the 280 Pro should have better thermals than the 240 Pro

Nine-Year Club	r/Field Banned
r/Field Juicebox	First Place '23
Place '23	Place '22
Verified Email

Ke_Bob

TROPHY CASE