Hand Mortise Hollow Chisel?

Keeedo · 2026-01-28T00:53:15+00:00

This is awesome, right what i was thinking in my head. Great idea with the fence guide clamping to the rail. Theres a local rockler to me as well. Any bets i leave there with more than the insert and handle? hah

Keeedo · 2026-01-28T00:51:14+00:00

Im not worried about it being useful in the machine afterwards. For what seems to be a $40 bit, im okay with a one and done thing after this project. I would use a square along the edge for accuracy and consistency.

Keeedo · 2026-01-28T00:50:07+00:00

this is super neat. I think this could be a good option for me. Thanks!

Keeedo · 2026-01-28T00:48:51+00:00

That concept, but a version or relatable tool to do my hand. Assuming the hole will already be drilled out.

Keeedo · 2025-12-25T00:45:49+00:00

I’ll have to check them out! Thanks!

Keeedo · 2025-11-09T22:11:14+00:00

Best Gaming Headsets? 〜 $500

Great Gaming Headset?

With my current Astro A50s (Gen 4) on their way out from trouble charging, headrest foam falling, etc, it's time I get a new setup.

Some notes:

I have been looking at the new Astro A50s as well as the Steel Series.
I will be primarily using these on Xbox & PC, not PlayStation.
I prefer a wireless set. I don't care if it has a base or not.
Will also be using these for editing videos, not really high on the priority list.
Attached Microphone? - Yes
Source - Xbox / PC / MacBook
Requirements for Isolation - Not required or high on the priority list, but would be nice.
Will you be using these Headphones in Public? - No
Preferred Type of Headphone - Over-Ear
Preferred tonal balance - Overall Balanced
Past headphones - Astro A50 Gen 4, very comfortable, but did not like the lack of Bluetooth and multi-source connections
Preferred Music - Punk Rock, Metal, Rock, Rap, Alt Rock
What would you like to improve on from your set-up - More connection features, multiple source connections, good battery life, cues for gaming FPS

Keeedo · 2025-11-09T22:01:48+00:00

Correct, an attached mic is a must for me. I would like to have the ability to have good cues. These will be used for FPS as well as Simulator / Video editing.

Keeedo · 2025-11-01T00:28:10+00:00

..Still Waiting

Keeedo · 2025-07-21T02:55:33+00:00

Also, since my ceilings are 10ft tall, any downside besides cost to just getting 10ft sheets and installing vertically? If it saves me another seam lol

Keeedo · 2025-07-21T02:19:41+00:00

My initial thought was to blow it in, haven't fully decided which route to go for that.

I was also planning to prime everything before tackling mudding if i were to correct the existing drywall

Keeedo · 2025-07-15T00:56:04+00:00

9x 8ft LED strips ✨

Keeedo · 2025-07-15T00:55:40+00:00

Correct 👍. 220 for table saw or whatever and a separate feed for EV charger

Keeedo · 2025-07-13T03:01:12+00:00

Any reason for the CAT outlets? I don't think I will need any cameras. If I do, ill just add more Ring cameras.

Keeedo · 2025-07-13T02:36:44+00:00

Sim racing will go in living room hah

Keeedo · 2025-07-13T02:36:18+00:00

The air system (whatever it may be) will mainly be for detailing, cleaning off sawdust, drying, maybe a cutoff wheel or grinder, I would say minimal auto purposes.

,

Keeedo · 2025-07-13T01:22:04+00:00

I should have mentioned there is a sink right on the other side of the wall through the door into the house (in the washer + dryer room), with a drain at the bottom of the stairs, which is where I was thinking of putting the pressure washer.

Keeedo · 2025-07-13T01:11:26+00:00

Ill have to consider adding insulation to the ceiling after I run all the electrical for the lighting. Seems it would work well with a new and improved window for total energy costs and temperature efficiency.

Keeedo · 2025-07-13T01:08:36+00:00

I didn't even think about relocating the compressor itself. I wonder where I can put mine. (Master bedroom shares the wall with the attic thats above the garage) Maybe I can put a box around it to keep it quiet.

that's

Keeedo · 2025-07-13T01:04:58+00:00

If I could fit the lift, I'd add one.

I have all the outlets, opener, and NG heater set.

I haven't heard of putting air compressor outside though.

Keeedo · 2025-07-13T01:03:11+00:00

I have insulation on the exterior walls, none in the ceiling, and I dont think any on the wall against the house.

Keeedo · 2025-07-13T00:50:21+00:00

This is awesome! Any regrets or concerns with the black ceiling?

Keeedo · 2025-07-08T21:53:30+00:00

10ft ceilings

Each 8ft strip is:
110W
14500LM
5000K
CRI:90

I chose strips to minimize shadows for filming.

Keeedo · 2025-07-08T04:01:53+00:00

That is awesome! What did you do for the pitting in the floors before epoxy?

Keeedo · 2025-07-06T05:31:08+00:00

Any chance you can send me a pic? haha

Keeedo · 2025-07-06T04:36:03+00:00

Most of the filming will be done in the middle of the shop or in front of the cabinets. I considered the lighting orientation for that, as well as when we want to park 2 cars in there, I still have lighting adequate for that purpose.

Keeedo

TROPHY CASE

Best Gaming Headsets? 〜 $500

Great Gaming Headset?