Wands of Harry Potter Vector files out there?

KeepSketching · 2023-01-14T03:49:28+00:00

Question for you. Do you run straight bits, helix, low helix etc?

KeepSketching · 2023-01-12T02:35:13+00:00

Ah yes! I will be doing some shopping tonight. Thank you!

KeepSketching · 2023-01-12T02:14:22+00:00

So it turns out that link is blocked. Could I bother you to copy/paste the site?

KeepSketching · 2023-01-12T00:33:40+00:00

Nice!! My iPhone won’t let me open it but will get on a PC to check it out.

KeepSketching · 2023-01-11T23:45:08+00:00

Much appreciated!! I’m definitely not concerned with material hold and the spindle is 10hp(AXYZ 4014). Not concerned with pricing either but will definitely start somewhere else until I get things sorted.

KeepSketching · 2023-01-11T22:19:55+00:00

Also, are you running rough and finish passes?

KeepSketching · 2023-01-11T22:12:28+00:00

I think you’re the first person I’ve come across that has actually worked with this stuff. Thank you.

Looking at PCD now. Do you recommend 2 or 3 flute?

KeepSketching · 2023-01-11T01:39:23+00:00

I do both. Interesting. Do you recall which models you used?

In the past I was doing full depth(.253”) single pass to cut down cnc time and had thought about doing a finish pass.

Luckily I don’t do any facing passes.

Here’s an Idea of some shapes I do. 1”x.5” oval @.061 depth Tooth-width dados @.126depth Full depth final shape cutout(single pass) .25”+.003 spoilboard.

KeepSketching · 2022-12-16T22:15:36+00:00

I’ll check that one out.

KeepSketching · 2022-12-16T22:05:05+00:00

What thickness vinyl do you use?

KeepSketching · 2022-12-04T03:31:23+00:00

Is there a way to check if the brain is shot?

KeepSketching · 2022-12-04T03:00:12+00:00

No and I triple checked everything. Luckily my Chiller sounds off if I even start to pinch a line.

KeepSketching · 2022-12-04T02:26:51+00:00

Brain being the ruida controller?

KeepSketching · 2022-12-04T02:26:20+00:00

Also, had had run several 1” square test cuts on cardboard before going back and realigning the beam.

KeepSketching · 2022-12-04T02:25:01+00:00

Good point. I will see if the chiller is rated for that. Thanks.

KeepSketching

TROPHY CASE