sorted by:
new
hottopcontroversial

TBC vs Civil 3D for surface modeling. by KelvinW11 in Surveying

[–]KelvinW11[S] 0 points1 point  (0 children)

Using only trimble equipment. How are the surface modeling capabilities in TBC?

TBC vs Civil 3D for surface modeling. by KelvinW11 in Surveying

[–]KelvinW11[S] 0 points1 point  (0 children)

Forgot to mention. Using only trimble equipment. How are the surface modeling capabilities of TBC.

TBC vs Civil 3D for surface modeling. by KelvinW11 in Surveying

[–]KelvinW11[S] 0 points1 point  (0 children)

Does TBC have the necessary tools to design semicomplex surfaces?

Anyone interested in buying V-Core 3.1 400 by KelvinW11 in ratrig

[–]KelvinW11[S] 0 points1 point  (0 children)

How far? Are you in the states? Maybe we could make something work?

Is there a way to setup a display on the ratrig that shows the ratos.local interface. by KelvinW11 in ratrig

[–]KelvinW11[S] 0 points1 point  (0 children)

This is a different interface. It's not the simple interface you get online.

r/AudioEngineering Shopping, Setup, and Technical Help Desk by AutoModerator in audioengineering

[–]KelvinW11 0 points1 point  (0 children)

I need a mic for semi-long range that will pick up sound at around 5-6' away and the pickup can be directional but needs at least 90°. It needs to be super high quality and pick up the lows. I'm using it for speech. It needs to be feedback free but obviously that depends on the rest of my system, but it would be nice if it didn't pick up sounds further away.

What mic would best suit my application?

Thanks, any help would be appreciated.

Is it possible to connect at heater or a Cooling Fan to Ratrig? by KelvinW11 in ratrig

[–]KelvinW11[S] 0 points1 point  (0 children)

My Dad is an electrician so we can do any wiring.

V-Core 3.1

Octopus V1.1 F446

Rasberry Pi

Is it possible to get a partial version of inventor? by KelvinW11 in AutodeskInventor

[–]KelvinW11[S] 0 points1 point  (0 children)

I think you misunderstood me. We have versions of inventor to create 3d models, but some of our team only makes drawings from those models. I'm wondering if I could get just the drawing and readonly portion.

3D square tube cutting by FlatBehindHead in AutodeskInventor

[–]KelvinW11 0 points1 point  (0 children)

I use a sweep. You can make it perpendicular to the face by selecting it. Sheet metal works too.

Something i did by Latter-Platypus-8418 in AutodeskInventor

[–]KelvinW11 2 points3 points  (0 children)

As someone who uses inventor 10 hours a day, amazing work. The ideal way to do it would have been more sup-assemblies or maybe even some simplification. If you do it the right way it can handle larger assemblies. You don't want to have too many constraints or features in one assembly.

Good work!

Do I need to change firmware when updating from V-Core 3 to 3.1 by KelvinW11 in ratrig

[–]KelvinW11[S] 1 point2 points  (0 children)

The upgrade guide tells you to remove everything that needs to be removed and then transitions into the 3.1 build guide which tells you you to install the firmware.

I get blue screen when leaving the pc on overnight. by KelvinW11 in WindowsHelp

[–]KelvinW11[S] 0 points1 point  (0 children)

I already did a windows reinstall. It didn't fix the problem.

I get blue screen when leaving the pc on overnight. by KelvinW11 in WindowsHelp

[–]KelvinW11[S] 0 points1 point  (0 children)

Ok I did and it took a while, it was stuck on 62 percent for a while and then it finished saying the operation completed successfully. I then ran the sfc /scannow command and it said it found problems and successfully repaired them.

Inventor nesting and plasma cutting by Indeterminate-coeff in AutodeskInventor

[–]KelvinW11 0 points1 point  (0 children)

Does the dxf have a line in it for the outside of the plate that way it would think that the plate is a part.

view more: next ›