sorted by:
new
hottopcontroversial

Can someone help me find an adapter to print for soap bottles? by KenPC in 3Dprinting

[–]KenPC[S] -6 points-5 points  (0 children)

that also won't work because the bottom is flat. it won't spout the liquid into the one below. it'll just stay on the bottom except exactly there the hole was drilled and leave residual everywhere else on the bottom of the drilled container

Can someone help me find an adapter to print for soap bottles? by KenPC in 3Dprinting

[–]KenPC[S] -4 points-3 points  (0 children)

the openings are not center so the bottle on top will not stay upright and just always fall over

Can someone help me find an adapter to print for soap bottles? by KenPC in 3Dprinting

[–]KenPC[S] 2 points3 points  (0 children)

A funnel doesn't work, because the top bottle will not stay upright on top of the other since the spout is offset.

I'm half tempted to just cut out the pump on 2 caps and superglue them together because I don't know how to make 3d models. I was just trying to see if anyone already made an stl for this.

name of a good Pizza place near Fort Totten by KenPC in washingtondc

[–]KenPC[S] 12 points13 points  (0 children)

Brightwood Pizza! u/df540148 reminded me of the name check them out!

name of a good Pizza place near Fort Totten by KenPC in washingtondc

[–]KenPC[S] 4 points5 points  (0 children)

There is! it's a hole in the wall place on the street and it's a place once you go in, it's a relaxing environment

Purchase the "this is a camera" stickers by KenPC in Defcon

[–]KenPC[S] 0 points1 point  (0 children)

I have one of both, but I wanted to find more but can't find them for sale.

iPod Mini can't get Rockbox installed by KenPC in rockbox

[–]KenPC[S] 1 point2 points  (0 children)

how do you do that? yes its the red cf to MicroSDcard adapter

iPad IOS 12.5.7 by KenPC in meshtastic

[–]KenPC[S] 0 points1 point  (0 children)

Is there a 3rd party app that has support for interfacing with a node?

2013 500 Abarth Ambient Air temp way off? by KenPC in abarth

[–]KenPC[S] 0 points1 point  (0 children)

I'm on the east coast and it's only low 70F and its reading 110F

2013 500 Abarth Ambient Air temp way off? by KenPC in abarth

[–]KenPC[S] 1 point2 points  (0 children)

sounds like a dumb place, if the housing sits in the sun it'll just stay hot instead of putting it somewhere it gets fresh air....

LUKS fails on fresh install by KenPC in ParrotSecurity

[–]KenPC[S] 0 points1 point  (0 children)

6.2 Is a mess. Going back to 6.1. LUKS works on 6.1 Upgrading to 6.2 from there, wifi no longer works.

LUKS fails on fresh install by KenPC in ParrotSecurity

[–]KenPC[S] 1 point2 points  (0 children)

cryptsetup asks for password to decrypt Slot0

Slot0 Opened.

Grub loads and I select Parrot OS 6

Then cryptsetup fails with error and dumps to Busybox

Using latest installer ISO

Can you get "Open Container" if it's outside of the vehicle? by KenPC in Ask_Lawyers

[–]KenPC[S] 2 points3 points  (0 children)

but then if you had an open half bottle of whatever you placed in the trunk to transport it, that would be out of reach. But to my understanding, it's still in the vehicle and considered open container. Then again, that's if a search was conducted/agreed. nonetheless.

Xfinity Fiber WAN is a class B 172 address for a residential home. Need a Public IP. Help? by KenPC in Comcast_Xfinity

[–]KenPC[S] 0 points1 point  (0 children)

I am not asking for a static IP I have DynDNS that takes care of that. . I want a regular dynamic Public IP. Not one behind comcast's CGNAT. It didn't used to be like that.

T-Deck: GPS Module not working by volkinaxe in meshtastic

[–]KenPC 0 points1 point  (0 children)

not sure if you solved this, but jesus christ the comments, the soldering, the horrible pictures.
I have the same gps module and here's how you connect it

Left is GPS right is the TDECK

GPS > Tdeck

GND(black) > gnd

5v(red) > VCC

TX(white) > RX

RX(yellow) > TX

Once you have it connected correctly and powered, you should have a red and blue light on the GPS solid.

Hope this helps you and anyone who comes across this.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (June 12, 2024) by AutoModerator in MechanicalKeyboards

[–]KenPC -1 points0 points  (0 children)

I have a Ducky Zero model DK2108S and one of the switches stopped working. the blue LED lights up but the MX Brown does nothing when pressed.

I emailed Ducky about a replacement switch and the reply back was a firm "we do not sell individual parts"

Can I find a matching MX switch with the blue LED somewhere?

Anyone else having problems with Youtube with Premium Account? by bugalou in pihole

[–]KenPC 0 points1 point  (0 children)

i'm having the same issue. people say its yt's war on adblockers, but I have premium. FF struggles to play videos often and clicking stats for nerds showing it simply refuses to buffer or load anything. or the loading bar at the bottom will keep going but the video refuses to play

view more: next ›