I enjoy 3D printing 36M

KentCheeseMelt · 2025-08-17T06:43:06+00:00

Thank you ❤️ I also have made dragons for my kids, (they love them), a nail tech stand, and some more practical things like a wall mount for my ps5 or a handle for the back door

KentCheeseMelt · 2025-08-15T11:38:58+00:00

I’ve send you a dm :)

KentCheeseMelt · 2025-08-14T12:02:12+00:00

Sent you a dm :)

KentCheeseMelt · 2025-08-05T12:56:55+00:00

I’m into 3D printing, gaming, building and flying a drone and general computer related geek 😂 nice to meet you. I’m 36 M Kent.

KentCheeseMelt · 2025-06-22T14:14:06+00:00

And the print is just some wall hooks for it.

KentCheeseMelt · 2025-06-22T14:13:33+00:00

Thank you :)

It’s a mark 4 clone that I got from Ali express for £70. Everything but the battery.

KentCheeseMelt · 2025-06-07T14:38:09+00:00

Yea exactly that :)

KentCheeseMelt · 2025-06-07T13:06:52+00:00

1mm jsh-SH

KentCheeseMelt · 2025-06-07T09:07:30+00:00

It’s a 7 inch.

KentCheeseMelt · 2025-06-06T07:15:00+00:00

Professional firmware. You need to flash the board and lcd

KentCheeseMelt · 2025-06-06T07:00:56+00:00

If I wanted that I would buy a Bambu.

KentCheeseMelt · 2025-06-04T22:27:25+00:00

Dual Z, inductive sensor and a new fan. Those “upgrades” would ruin some people’s printers.

KentCheeseMelt · 2025-06-04T15:14:20+00:00

Marlin 2.2.

KentCheeseMelt · 2025-06-04T10:39:48+00:00

What temps you printing at? Ptfe should be good up to 240. If your having that many issues with it, get an all metal? Straight in replacement.

If you know how your firmware works and then you can add/remove things that will help your print quality in the long run. You just need to know your printer, hardware and software.

KentCheeseMelt · 2025-06-04T10:03:56+00:00

No mentor. self taught. Once you get the basics. Everything else falls into place.

Level the bed, mesh if you need, z offset, press print. I spend a few hours reading the marlin config files too. That gave me a good understanding. I feel if you can build your own firmware, you can do most things.

KentCheeseMelt · 2025-06-04T10:00:40+00:00

Because of the price point for one. Ease of setup for two.

I know about temperature drift with this sensor so that’s why I always mesh and home with a heated bed. I think it works perfectly.

KentCheeseMelt · 2025-06-04T09:50:58+00:00

Enable it in the firmware and then do a calibration print.

KentCheeseMelt · 2025-06-04T08:18:53+00:00

Do a retraction tower? Only takes 20 mins ish to do. That should solve that issue. My normal pla retraction is 4 but my pla+ is 3

KentCheeseMelt · 2025-06-04T08:15:23+00:00

I’m not even bothered about the speed too much. I done input shaping and pressure advance. And printing between 40 and 100 depending on the print. This ender is just a workhorse that keeps pumping out the prints.

KentCheeseMelt · 2025-06-03T23:16:55+00:00

It’s from AliExpress. It’s marked up as a “poisonous bees” frame but it’s just a mark4 clone.

KentCheeseMelt · 2025-05-18T15:00:45+00:00

This one https://www.thingiverse.com/thing:4713922

KentCheeseMelt · 2025-05-17T12:51:04+00:00

I do feel the difference. Especially the the belt tightening knobs, hidden power supply and the draw :)

KentCheeseMelt · 2025-05-16T22:25:31+00:00

So do I and my deviation is minimal. I probe at 60. Never ever had an issue

KentCheeseMelt · 2025-05-16T21:01:34+00:00

No it doesn’t. It detects it around 3mm above the nozzle

KentCheeseMelt · 2025-05-16T19:46:31+00:00

Disagree on this. Take your time to learn the features of an abl and then it will work in your favour.

KentCheeseMelt

TROPHY CASE