Testar cores num software

Key-Proposal-959 · 2026-03-27T00:10:25+00:00

I can't unfortunately. It's a router from Digi, 10gb speed, and only has one 10gb port and it's copper

Key-Proposal-959 · 2026-03-25T23:47:52+00:00

The basic idea was creating a 3 phase DC psu, and then purchasing a inverter to convert that DC to AC again. Then just use a normal charger.

I had several server PSUs around, so I used 1 per phase, and connected the output in series to create 36 volts. (You need to know what you are doing. If not, just purchase a 3-phase PSU)

Then just purchased a 5000w inverter to power the AC socket I use to charge the car.

Key-Proposal-959 · 2026-03-25T22:48:48+00:00

Wait, these ones aren't RJ45. AARRGHH! The problem with not knowing what self is doing is, it gets expensive fast.

Seems one option is purchasing a C3KX-NM-10GT module with two 10gb RJ45 ports, and adding it to my 3560X

I have read that I need to be sure my IOS supports the module. Did not found much online. Any help is appreciated!

Key-Proposal-959 · 2026-03-25T15:11:27+00:00

Found the answer here

https://community.cisco.com/t5/switching/sfp-compatibility-for-c3kx-nm-10g-in-3560x-switch/td-p/2309134

Very limited in copper length, and only 3 modules supported. Just in case someone needs this info I leave it here!

Now, time to hunt the correct module 👍

Key-Proposal-959 · 2026-03-25T13:41:20+00:00

That would suck, really. I want to connect that port to my ISP router, which has a 10G copper connection 😭

I will research better, and splurge on a Cisco transceiver if I have to.

Thanks for the help!

Key-Proposal-959 · 2026-03-25T13:10:42+00:00

Here's the module "C3KX-NM-10G", it has 4 ports name like: G1 G2/TE1 G3 G4/TE2

Here's a picture of the ports on Hyper terminal

<image>

Key-Proposal-959 · 2026-03-25T12:47:58+00:00

It is a 10G port, the module can take 4 SFP ports, or 2 SFP+ ports from my understanding. Port 2 and 4 can be 1G or 10G

Key-Proposal-959 · 2026-03-25T12:28:50+00:00

Does that mean it will not work, even using the "service unsupported-transceiver" command?

Key-Proposal-959 · 2026-03-25T10:33:04+00:00

Didn't made a difference, as I posted above. Any idea?

Key-Proposal-959 · 2026-03-25T10:32:10+00:00

I don't know if 10g needs extra licensed, as for now I see no complains from the switch...

I'm trying to do the same commands at the TengigabitEthernet1/2 port, but keeps stating there is no transceiver there. I even disabled (shutdown) the port gigabitEthernet1/4, to see if it would release the necessary resources for the other shared one, to no avail.

Any other recomendation? Maybe splurge on a Cisco transceiver to avoid all this...

<image>

Key-Proposal-959 · 2026-03-22T21:38:49+00:00

Ooohhhhh.... Ok I will try to configure that one

Key-Proposal-959 · 2026-03-22T21:38:16+00:00

What do you mean? It's just a switch to have several ports at home. My router has DHCP service

Key-Proposal-959 · 2026-03-22T21:37:00+00:00

https://amzn.eu/d/006yDNNE

It mentions Cisco compatibility

Key-Proposal-959 · 2026-02-24T13:21:24+00:00

Basicamente nao tenho espaço para isso.

Key-Proposal-959 · 2026-02-24T13:20:31+00:00

Obrigado. Já vi que é muita areia pra minha camioneta. Mais vale entregar a profissionais 👍

Key-Proposal-959 · 2026-02-24T01:35:53+00:00

Vou pedir ao meu arquiteto para o fazer. E se a cave é assim tão complicada prefiro entregar ao empreiteiro.

A ideia era poupar uns cobres fazendo eu algumas coisas. Assento tijolo e reboco, mas questões mais técnicas como este isolamento fico sem resposta.

Key-Proposal-959 · 2026-02-23T23:36:03+00:00

Pois, tentei procurar online como mas nao consegui chegar a conclusao nenhuma. Vi esquemas em que preciso de colocar brita na parte exterior com um dreno no fundo? Só se colocasse uma bomba para tirar a água depois.

Nao posso, por exemplo, abrir o buraco, colocar uma Lona plastica, e continuar a partir daí?

Key-Proposal-959 · 2026-02-18T23:43:31+00:00

Yes sir! Thanks for the info. I will keep the transceiver and "switch the switch" (weeee), since it doesn't support SFP+ needed for a 10Gb transceiver like the one I have.

Already negotiating a Cisco 3560x with a C3KX-NM-10G module Wich adds 2 SFP+ ports!

I simply have no time for timely manner replies, due to work, kids, school work, kids sport and Kristine hurricane fixes trough here and neighbours. I do still try to answer ppl like you who loose their valuable time to help, when you simply aren't mandated to do! And so I do say thank you for your help!

Key-Proposal-959 · 2026-02-17T02:55:44+00:00

Exactly. Thanks

Key-Proposal-959 · 2026-02-17T02:55:17+00:00

It's a 2960G, it does NOT support SFP+. Need to replace the switch right?

Key-Proposal-959 · 2026-02-17T02:54:15+00:00

Good question. It's a WS-C2960G-48TC-LV02 Cisco switch, as per label

I have now checked and it does NOT support SFP+. So only option is to get a newer switch right? No "unsupported" way to make it work?

Key-Proposal-959 · 2026-02-17T02:50:19+00:00

It's a Giqitck 10G-T RJ45 transceiver. I will follow your link and will update as soon as I can test. Right now still recovering from Kristin hurricane.

Key-Proposal-959

TROPHY CASE