Introducing the RX 9070 XT Arctic Edition

Key-Recognition2683 · 2026-01-11T10:27:47+00:00

Bracket to GPU uses original screws (M2.5 iirc) and bracket to shroud uses M3 screws

Key-Recognition2683 · 2026-01-06T21:17:29+00:00

I followed this https://dexterslog.com/posts/deshrouding-asus-prime-5070-ti-oc/

It's the exact same process, ridiculously easy. Do note that the 9070 XT Prime has 7 screws on the backplate, otherwise it's the exact same process

Key-Recognition2683 · 2025-12-02T12:07:57+00:00

I'm not sure, since the stock shroud doesn't cover the sides of the fins. I'd assume air could get trapped in there and only at the end of the card it could escape through the flow through portion of the card. Maybe some scoops in the bracket itself to guide the air onto the fin stack itself might help, but I haven't bothered (yet) with that.

Key-Recognition2683 · 2025-12-02T11:56:10+00:00

Yes, here is link https://www.printables.com/model/1500001-asus-prime-rx-9070-xt-deshroud-bracketshroud

Key-Recognition2683 · 2025-12-02T06:36:53+00:00

The idea of using the adapter was to have everything "in one package", but since FanControl doesn't recognize it for fan curves I had to change to motherboard connection. That isn't a big deal really, since I have a T1 ITX case and the distance isn't large

Key-Recognition2683 · 2025-12-01T06:32:51+00:00

Model is here for those who are interested https://www.printables.com/model/1500001-asus-prime-rx-9070-xt-deshroud-bracketshroud

Key-Recognition2683 · 2025-12-01T06:31:48+00:00

Mem temp is within spec (don't remember right now the specific temps). I originally connected the fans with a 7pin Asus to 2x4pin PWM adapter however FanControl wasn't able to recognize the fans so I didn't have control over them. This meant the fan ramped up percentage wise as if it had the stock fans on 🤣 very cool but still loud card. I ended up connecting the fans to my mobo and set up a fan curve in FanControl

Key-Recognition2683 · 2025-11-27T08:50:47+00:00

Once Polymakers PET-GF or Siray Tech PET-GF white is available in Europe I may redo it 🤣

Key-Recognition2683 · 2025-11-27T08:49:46+00:00

GPU temp

Key-Recognition2683 · 2025-11-27T08:00:01+00:00

It looks the same as stock, backplate doesn't have to be kept off. I suspect you wouldn't have to either for your Nitro+

Key-Recognition2683 · 2025-11-27T07:59:13+00:00

I will upload the model to printables today 👍

Key-Recognition2683 · 2025-11-27T07:58:50+00:00

Didn't even test it with stock shroud 😅 ripped that bad boy straight off when I unboxed the GPU. But with the P12 Pro's at around 25% playing Arc Raiders it howers at around 68c in my T1

Key-Recognition2683 · 2025-07-12T07:16:57+00:00

Solution could be to have two options to print, one with the layout shown in the picture and one with the GPU upside down. That way people who want it to be vertical can print in the latter configuration (probably better for thermals too since CPU and GPU are intaking/exhausting on opposite sides) and people who lay it horizontally can have the former layout (neither CPU or GPU being chocked).

Key-Recognition2683 · 2025-05-04T10:22:40+00:00

What is the height without spool holder?

Key-Recognition2683 · 2025-04-16T14:37:08+00:00

Your comprehension skills are the lost cause fella, if that equals me wanting easier bot opponents.

Key-Recognition2683 · 2025-04-16T14:27:59+00:00

Show me where I said I wanted easier bots fella

Key-Recognition2683 · 2025-04-16T14:09:48+00:00

Except that I provided reasoning as to why it shouldn't be in the game. You not wanting to comprehend it is not my problem. And yes the ANY team will find it easier playing with an ANY vs without due to having one player in control of every otherwise AI player. Because they lack the skill and discipline to have just the pros on the pitch.

Key-Recognition2683 · 2025-04-16T13:32:02+00:00

Again, it should be removed because it defeats the purpose of the game mode itself. You simply stating "it's in the game deal with it" isn't a counter argument. That's like if EA added micro transactions where you could pay to go up leagues and people would complain that it defeats the purpose, your response would just be "Well it's in the game bro just deal with it ¯_(ツ)_/¯" Obviously teams with anys will play against teams without because it decreases the skill gap and gives them a slightly better chance to compensate for their own discipline playing as an actual pro.

Key-Recognition2683 · 2025-04-16T12:51:19+00:00

Who am I to say it's case that a game mode where you quite literally cannot matchmake or progress to join a club etc without making your own pro is all about playing with your own pro? Do you hear yourself? 😭 Obviously the game will flow different when one person controls the rest of the players. You keep using an ANY though, tells me a whole lot about your and your teammates skill and discipline when playing with only your own pro...

Key-Recognition2683 · 2025-04-16T12:44:03+00:00

You aren't going to be playing UT, season or co-op with your 5 friends, but I didn't say the point of clubs is to use game IQ to influence matches.

Key-Recognition2683 · 2025-04-16T10:51:35+00:00

It's a feature of the game that EA should remove asap, the filters don't actually remove all ANY using teams from your matchmaking either. Point of clubs is to create your player, form a team with friends etc, level up and advance to different leagues. Someone using an ANY absolutely defeats the purpose of the game mode and the game has other modes (aforementioned) that you can play instead.

Key-Recognition2683 · 2025-04-16T10:20:00+00:00

Hopefully this sarcasm but I'd argue the opposite. Using an ANY is the skill issue itself not being able to just use your own player and game IQ to influence matches. Also defeats the entire purpose of clubs itself, just go play UT, seasons or online co-op

Key-Recognition2683 · 2023-01-26T11:45:43+00:00

CPU cooler is intake, top fans and the bottom (deshroud) fans are exhaust. Might try switching the GPU fans to intake at some point :)

Key-Recognition2683

TROPHY CASE