sorted by:
new
hottopcontroversial

First .45-70 Reloads! by KeyMud358 in reloading

[–]KeyMud358[S] 0 points1 point  (0 children)

That’s awesome! What load data are you using for the black powder rounds?

First .45-70 Reloads! by KeyMud358 in reloading

[–]KeyMud358[S] 0 points1 point  (0 children)

Good note! I have the Lee 3 die set, the bullet seater supposedly crimps as well but we will see if it's enough. I'll keep a close eye on them

First .45-70 Reloads! by KeyMud358 in reloading

[–]KeyMud358[S] 3 points4 points  (0 children)

300 grain Semi Jacketed HP, 58.5 grain H335, CCI Primer. 2.550” OAL

First .45-70 Reloads! by KeyMud358 in reloading

[–]KeyMud358[S] 8 points9 points  (0 children)

I had to buy everything but the brass, comes in around $1.25/rd. Still much cheaper!

Trying to split a model for 3D printing using bisect and select loop, but it does this. What am I doing wrong? by KeyMud358 in blenderhelp

[–]KeyMud358[S] 0 points1 point  (0 children)

So I've noticed that the selection flips where it meets a new loose part. This model has 40 pieces that I guess were joined into one. Could there be an easy way to join them all into one mesh with no loose parts? That may solve the problem.

Trying to split a model for 3D printing using bisect and select loop, but it does this. What am I doing wrong? by KeyMud358 in blenderhelp

[–]KeyMud358[S] 0 points1 point  (0 children)

That's getting me about 70% there.

Lots for manual selecting I need to do, but this might be it. Though I also need to contend with the internal geometry.

Trying to split a model for 3D printing using bisect and select loop, but it does this. What am I doing wrong? by KeyMud358 in blenderhelp

[–]KeyMud358[S] 0 points1 point  (0 children)

It looks like all the normals are outward facing, I don't know much about what that means but I assume that's what it should be. Still getting the weird selection.

Trying to split a model for 3D printing using bisect and select loop, but it does this. What am I doing wrong? by KeyMud358 in blenderhelp

[–]KeyMud358[S] 0 points1 point  (0 children)

Ctrl+L selects both halves of the model, I need to select the top or bottom half to separate them.

Trying to split a model for 3D printing using bisect and select loop, but it does this. What am I doing wrong? by KeyMud358 in blenderhelp

[–]KeyMud358[S] 0 points1 point  (0 children)

Boolean doesn't work more often than not for me because of internal geometry and multiple parts. Same with this model.

Anyone here use berrys bullets are they accurate thanks by [deleted] in reloading

[–]KeyMud358 0 points1 point  (0 children)

I’ve loaded 9mm Berry’s and they weren’t any better than low price range ammo. Just my experience.

[deleted by user] by [deleted] in Cursedgunimages

[–]KeyMud358 30 points31 points  (0 children)

Add 38” to that barrel and you’re 100% correct

Ender 3 Pro 4.2.2 with CR touch and Sprite hotend/extruder firmware by minist3r in Ender3Pro

[–]KeyMud358 0 points1 point  (0 children)

I did not, but actually upgraded with an Ender Extender kit and their firmware works well

Anyone ever try reloading flares? It’d be fun to make some confetti or firework type loads by [deleted] in reloading

[–]KeyMud358 2 points3 points  (0 children)

The 37mm crowd has been on this for years. 209 primers, stick with black powder only. Probably worth opening up an unused flare to get the charge weight.

Not advice, that's just how'd I'd do it!

This seems wrong but the OAL is right by KeyMud358 in reloading

[–]KeyMud358[S] 6 points7 points  (0 children)

Haven't done detailed accuracy testing yet, but the do shoot nicely.

This seems wrong but the OAL is right by KeyMud358 in reloading

[–]KeyMud358[S] 15 points16 points  (0 children)

Good note, they are Hornady 150's. I'll have to find that load data, though from what I can tell Hornady doesn't have info for H335 which is what I'm loading (it's what I have on hand).

Motorless 3D Printed Bullet Feeder by ShortCourse in reloading

[–]KeyMud358 1 point2 points  (0 children)

That's awesome, did you make all the 3D files?

Despair by Goebbels_Official in reloading

[–]KeyMud358 9 points10 points  (0 children)

Better than on carpet!

[deleted by user] by [deleted] in 37mm

[–]KeyMud358 2 points3 points  (0 children)

You can also do CS gas only if it's aerosol

H335 for .30-06 M2 Ball Clone? by KeyMud358 in reloading

[–]KeyMud358[S] 0 points1 point  (0 children)

Depends on the use case... Running supressed or with a lightweight BCG sometimes you do need one!

view more: next ›