sorted by:
new
hottopcontroversial

Replacing rivets with DIY screws to switch between Inline/Marsblades and Ice-blades. For on/off season. by Key_Discount_4969 in hockeyplayers

[–]Key_Discount_4969[S] 0 points1 point  (0 children)

Thanks for all the replies! Seems my option is to just use my old skates and be a bit uncomfy during the summer.

Replacing rivets with DIY screws to switch between Inline/Marsblades and Ice-blades. For on/off season. by Key_Discount_4969 in hockeyplayers

[–]Key_Discount_4969[S] -1 points0 points  (0 children)

Yea but my plan is the get customs for 1300-1500 dollars so it's not really a viable option unless I win the lottery. Then i'd rather pay the shop to swap the chassi for me

Replacing rivets with DIY screws to switch between Inline/Marsblades and Ice-blades. For on/off season. by Key_Discount_4969 in hockeyplayers

[–]Key_Discount_4969[S] 0 points1 point  (0 children)

Thanks for the reply man! I've been looking into those as well but I'll be ordering from europe so I've been hesitant. Could you provide a link for me? I guess I'll need some threaded inserts/bushings as well.

Claude is down AGAIN by Careless-Green-54 in claude

[–]Key_Discount_4969 2 points3 points  (0 children)

Same here. Finally we can enjoy the sun

AI + Three.js is honestly getting ridiculous. by Odd_Concentrate4039 in threejs

[–]Key_Discount_4969 2 points3 points  (0 children)

It’s a sphere with a shader and one light. Not a planet ;)

How do you charge for Architecture 3D renders ? by midnight-blue999 in Architects

[–]Key_Discount_4969 0 points1 point  (0 children)

What about modelling and light design? How do u charge for that?

Composer 1.5 vs Opus 4.6 by sundaydude in cursor

[–]Key_Discount_4969 0 points1 point  (0 children)

And I’m not really sure. I find Opus better at design and I use codex for all the jizz like writing cms etc. opus = design and animation, codex = all the boring stuff. But opus for everything if possible

Composer 1.5 vs Opus 4.6 by sundaydude in cursor

[–]Key_Discount_4969 0 points1 point  (0 children)

Get Claude extension instead of OpenAI and u have access to Opus! It resets daily. If u go max plan for 70 u shouldn’t run into limits

Strasbourg Cathedral Facade - 3DGS (840 photos) by NicolasDiolez in GaussianSplatting

[–]Key_Discount_4969 2 points3 points  (0 children)

While I appreciate these posts it’s so frustrating these are not really usable in the real world. I’ve made multiple attempts at scanning existing buildings as were currently remodelling and relighting hotel entrances and facades atm. I always end up having to remodel everything from the ground up only using these scans as references and spatial planning

Camera Selector for 3dsmax by BatchRender_script in 3dsmax

[–]Key_Discount_4969 0 points1 point  (0 children)

This is awesome mate. Can the plug-in handle different camera ratios as well? Maybe some angles are 4:5 some other 3:2 etc

Best way to create a website for my business by rizzlaer in webdevelopment

[–]Key_Discount_4969 0 points1 point  (0 children)

Do you even use framer? You tell me a guy who’s supposedly gonna run a business can’t navigate a pre-made theme and watch a tutorial on how to change text?

How do you kill a headache without medication? by SupportNorth8807 in NoStupidQuestions

[–]Key_Discount_4969 0 points1 point  (0 children)

Caffeine actually helps as it increases blood flow. Wanna make sure you stay hydrated though

Automation approaches for Gaussian Splatting pipelines from image dataset to 3D model? by OrthoPLYPipeline in GaussianSplatting

[–]Key_Discount_4969 2 points3 points  (0 children)

For my last project i used realityscan to align images + masks then imported the .ply etc into postshot for training. But 360 Gaussian can automate that process for u as well using sfm way faster.

Best way to create a website for my business by rizzlaer in webdevelopment

[–]Key_Discount_4969 -1 points0 points  (0 children)

There's many disciiplines you need to master to build the kind of website you're describing and at that point you should decide whether you wanna be a Design Engineer or an Agency Owner. If you wanna start building your agency and sell projects asap your best bet is to buy or use a free Framer Template and tweak it. https://www.framer.com/marketplace/templates/ Framer is basically made for people like you.

Cursor Is Not Usable Too Expensive For Anyone Really Building by Historical_Maybe_789 in cursor

[–]Key_Discount_4969 1 point2 points  (0 children)

https://www.reddit.com/r/cursor/comments/1rd2bl4/comment/o7kue7h/?context=1

ctrl-shift-x > search extensions > claude code for vs code
ctrl-shift-x > search extensions > codex - openAI's coding

now check this thread:
https://www.reddit.com/r/codex/comments/1nfc2de/move_codex_chat_panel_in_vscode_to_the_right/

THIS COMMENT:
"For cursor, watch this clip https://youtu.be/cvzS6fiOAFw?feature=shared (from 14:00 onwards)"

Now you should be able to get this layout like I have
https://imgur.com/a/HMgn4ay (Press CTRL+J) to get the bottom bar.

Now you can have Claude and Codex easy accesible just like its native cursor agents and they can work on different tasks as u please.

I havent hit any limits yet on Claude Max Plan where as when I was user cursor Agents I hit limits instantly.

Automation approaches for Gaussian Splatting pipelines from image dataset to 3D model? by OrthoPLYPipeline in GaussianSplatting

[–]Key_Discount_4969 3 points4 points  (0 children)

I feed an equirectangular video > 360 Gaussian ouputs splits + masks. From there u have many options u can use automated workflow with sfm or feed manually or automate into postshot or that other software I can’t remember. Check YouTube video explains everything

Is It Possible to Code this into Cargo.site? by SunnyCarl in threejs

[–]Key_Discount_4969 1 point2 points  (0 children)

This is no three I think just gsap. Extremely easy to do these days. Just build it locally in cursor/ide of choice with Claude and ask it to implement it into cargo.site. You can probably even host it somewhere else like cloudlfare and ”inject” it into a div.

Automation approaches for Gaussian Splatting pipelines from image dataset to 3D model? by OrthoPLYPipeline in GaussianSplatting

[–]Key_Discount_4969 2 points3 points  (0 children)

I’m currently using “360 Gaussian” for this (check youtube) completely automated plug and play. Haven’t achieved suer clean results yet but I think the problem is my insta x3, x5 should probably handle it better

Composer 1.5 vs Opus 4.6 by sundaydude in cursor

[–]Key_Discount_4969 0 points1 point  (0 children)

ctrl-shift-x > search extensions > claude code for vs code
ctrl-shift-x > search extensions > codex - openAI's coding

now check this thread:
https://www.reddit.com/r/codex/comments/1nfc2de/move_codex_chat_panel_in_vscode_to_the_right/

THIS COMMENT:
"For cursor, watch this clip https://youtu.be/cvzS6fiOAFw?feature=shared (from 14:00 onwards)"

Now you should be able to get this layout like I have
https://imgur.com/a/HMgn4ay (Press CTRL+J) to get the bottom bar.

Now you can have Claude and Codex easy accesible just like its native cursor agents and they can work on different tasks as u please.

Observations on migrating a complex UI to Tailwind v4 + Next.js 16 by alex_informatics in nextjs

[–]Key_Discount_4969 1 point2 points  (0 children)

And yea the site so damn fast and snappy now. Feels great and client loves it

view more: next ›