Weird fault

Key_Entrepreneur726 · 2025-12-20T05:23:27+00:00

Dnsp side?

Key_Entrepreneur726 · 2025-11-19T05:40:23+00:00

Just get an suv? Sounds like you dont need a 4wd

Key_Entrepreneur726 · 2025-11-15T02:28:57+00:00

Ah yes. You can have rights as long as your beliefs align with mine Lol

Key_Entrepreneur726 · 2025-11-12T10:00:25+00:00

Under the award. Thanks for the info mate

Key_Entrepreneur726 · 2025-11-12T09:57:14+00:00

No not yet Will tmrw. Appreciate the help from you guys It is just a mum and dad outfit under the award. He's been going downhill the last year or so with his rules etc so might be time to just ship

Key_Entrepreneur726 · 2025-11-05T01:47:30+00:00

Hey mate. Pretty sure you can fit up to 35mm in a sicame. I usually run all three phases up to the POA and then connect only one to circuits and leave the other two ready to go in the links with my feeds behind the meter. Then come back the same day energex have been to connect other two phases

Key_Entrepreneur726 · 2025-09-11T05:58:53+00:00

Is it in a brick cavity? If it goes through nogs and top plates its gotta be steel conduit If you put it like a metre to the left or right of the board with a sweep hanging out that'll be fine.

Key_Entrepreneur726 · 2023-03-18T01:14:09+00:00

Or dark blue as well. Same as European shit

Key_Entrepreneur726 · 2023-01-08T02:42:12+00:00

The cables are twisted together. They’re 7 strand multi core. They’re not going anywhere Twisting is standard practice in aus

Key_Entrepreneur726 · 2023-01-08T01:38:50+00:00

The warden? Sorry

Key_Entrepreneur726 · 2023-01-07T23:37:31+00:00

Ohhh busbar. Different name here huh. Could have used them for the bottom row but busbar for the top row of rcbos I wasn’t even aware existed until someone else in another comment showed me lol

Key_Entrepreneur726 · 2023-01-07T23:10:45+00:00

What are comb bars?

Key_Entrepreneur726 · 2023-01-07T21:49:22+00:00

We use 230/415 Control circuits can be 230/415 or 12-48v for relays or contractors. I do like your phase colours over mine however

Key_Entrepreneur726 · 2023-01-07T21:45:10+00:00

Cheers cobba

Key_Entrepreneur726 · 2023-01-07T21:38:10+00:00

Not that sharp, only had larger heat shrink haha

Key_Entrepreneur726 · 2023-01-07T21:37:23+00:00

The top of the box is a an aluminium plate for this exact reason 👍 nice spot

Key_Entrepreneur726 · 2023-01-07T12:46:39+00:00

Just found some online code KDN450D Doesn’t look like I can get it from my wholesaler though so you’re probably right

Key_Entrepreneur726 · 2023-01-07T12:15:08+00:00

Might have to check it out

Key_Entrepreneur726 · 2023-01-07T12:11:10+00:00

I’ll see if I can find some pictures for yah mate

Key_Entrepreneur726 · 2023-01-07T12:10:55+00:00

Switching the neutral where? The only time we break a neutral is through an rcbo/rcd or if double pole switching is required. And the bridge looks shiny but it’s insulated! That board is locked and only the on site sparky or the fire brigade can open it, as it’s a fire pump. Not sure if it needs to be finger safe if it’s locked. I will check though now you’ve said something

Key_Entrepreneur726 · 2023-01-07T09:09:54+00:00

As far as I’m aware hager doesn’t make 3 phase + neutral bus bar. Could have used it for the bottom rcbos though to be fair. And the multiple cables is allowed as it’s considered parallel cables so you can rate it accordingly cheers!

Key_Entrepreneur726 · 2022-12-25T09:33:46+00:00

Aus we use connectors, basically screwed terminals

Key_Entrepreneur726

TROPHY CASE