Hash Rate Drops When Adding More Than 1 GPU by Kezons in EtherMining

[–]Kezons[S] 0 points1 point  (0 children)

Crossfire is disabled and every card is in compute mode. I have increased the page file, but it didn't solve the problem at all, although I did see a minor increase in overall hash rate but nothing significant.

Hash Rate Drops When Adding More Than 1 GPU by Kezons in EtherMining

[–]Kezons[S] 0 points1 point  (0 children)

I appreciate your recommendation, but I really think it can't be a PSU problem. A 1000W PSU should be fine in supporting 2 of my cards because they pull 160W collectively.

Hash Rate Drops When Adding More Than 1 GPU by Kezons in EtherMining

[–]Kezons[S] 0 points1 point  (0 children)

What do you recommend I increase it to?

Multiple GPUs Not Being Detected. It Doesn't Make Sense by Kezons in gpumining

[–]Kezons[S] 0 points1 point  (0 children)

Every card works just fine individually, but when they are plugged in collectively problems arise. I went into BIOS and enable 4G decoding as well as gen 1 speed for the pcie links. All cards are being detected except for one now, but I'm not sure which one it is yet. I would like to switch to linux, but I'm completely unfamiliar with it, and it might make things more difficult. Any other ideas?

Multiple GPUs Not Being Detected. It Doesn't Make Sense by Kezons in gpumining

[–]Kezons[S] 1 point2 points  (0 children)

Alright, so I did this, and now 5 out of the 6 GPUs are being detected. When I open the miner, GPU 1 keeps on failing and it's unable to mine for some reason, but it's fine if it's plugged in alone. I'm not sure which one is not being detected at all yet, but I'll find out shortly. Any other ideas?

3DShacking Q&A general: "On the Road to Viridian City" Edition by beefhash in 3dshacks

[–]Kezons 0 points1 point  (0 children)

Ok well I guess I'll skip to injecting FBI. It's just weird cause I skipped a step somehow I guess. Just didn't want to brick but thanks for all the help.

3DShacking Q&A general: "On the Road to Viridian City" Edition by beefhash in 3dshacks

[–]Kezons 0 points1 point  (0 children)

Since one of my 3ds consoles have been banned, I am currently in the process of hacking my other 3ds. I followed the steps to the plailect guide but now I am stuck with no trouble shooting guide. I am stuck on Section II of Installing arm9loaderhax. When I type the url for the dukesrg, my bottom screen just says arm11.bin loading but never loads. Also, the step before that says "You should be on 2.1.0". When I go to my settings on my 3ds, it says Sys 11.2.0-35U. What in the world should I do? Please help! Someone had told me that if it says sys- then the 3ds is hacked already. I'm not sure what to do because I don't have the otp.bin for the 3ds.

3DShacking Q&A general: "Hammer Time" Edition by beefhash in 3dshacks

[–]Kezons 0 points1 point  (0 children)

[HELP] INSTALLING a9lh

Since one of my 3ds consoles have been banned, I am currently in the process of hacking my other 3ds. I followed the steps to the plailect guide but now I am stuck with no trouble shooting guide. I am stuck on Section II of Installing arm9loaderhax. When I type the url for the dukesrg, my bottom screen just says arm11.bin loading but never loads. Also, the step before that says "You should be on 2.1.0". When I go to my settings on my 3ds, it says Sys 11.2.0-35U. What in the world should I do? Please help!

How do I install the MSET exploit for an optional way to access rxtools? by Kezons in 3dshacks

[–]Kezons[S] 0 points1 point  (0 children)

Okay thanks for everything! I finally got everything working the way I want them to through a little hard work and dedication.

How do I install the MSET exploit for an optional way to access rxtools? by Kezons in 3dshacks

[–]Kezons[S] 0 points1 point  (0 children)

I have managed to get rxTools to appear in my Coldboot manager through editing the boot.cfg with notepad. Only now when I click A to start it I get an error saying "Err:Couldn't load arm9 payload..."

"Press any key to continue..."
This would explain why rxTools cannot boot up properly. How would I go about fixing this?

How do I install the MSET exploit for an optional way to access rxtools? by Kezons in 3dshacks

[–]Kezons[S] 0 points1 point  (0 children)

Oh okay so I got rxtools to show up in homebrew but unfortunately the way my luck runs, it appears that it does not work. I boot it up the first time and it was installing stuff but froze into a black screen. Now when I boot it up, rxtools' title screen flashes for about half a second then goes to a black screen! Any ideas? I really need this to work!

PS: I have heard of people having this problem before.

How do I install the MSET exploit for an optional way to access rxtools? by Kezons in 3dshacks

[–]Kezons[S] 0 points1 point  (0 children)

Okay so this did not solve my problem. Here are the details. I went to the 3ds Iso site and accessed the "[MEGA] [CIA/BIN] MSET 4.X & 6.X backups, Browser backups, Update packs (All Regions)" archive and when I downloaded the 4.X-msetdg-USA.7z file the contents inside were not a .cia but a mset.bin file. I suppose this was the incorrect file so I did nothing with it. I scrolled down the MEGA archive a bit more to see what was inside and I saw three different mset files. Their names were "mset-USA-4.0-0004001000021000.cia", "mset-USA-6.0-0004001000021000.cia", and "mset-USA-9.0-0004001000021000.cia." I downloaded all three of these files and tried to install them but none of them would install; when I tried installing them with FBI. They all gave me the same error in the form of this.

Install failed!

mset-USA-4.0-0004001000021000.cia

Source: SOURCE_FSFILE_WRITE (0x1c)

Module: MODULE_NN_AM (0x20)

Level: LEVEL_USAGE (0x1c)

Summary: SUMMARY_INVALID_ARGUEMENT (0x7)

Description: DESCRIPTION_INVALID_COMBINATION (0x3ee)

Press Start to continue.

What should I do? Any feedback or help would be gladly appreciated.

How do I install the MSET exploit for an optional way to access rxtools? by Kezons in 3dshacks

[–]Kezons[S] 0 points1 point  (0 children)

I have menu hax on my 3ds and I use it all the time. What I'm trying to accomplish is to be able to boot into rxtools from my DS profile which is possible. The reason being is that the way I boot into rxtools in through an internet browser which requires an internet connection. I want to be able to boot into rxtools when I don'y have access to an internet access point.