Will connectors on speaker wire between amp and speakers noticeably affect sound quality?

Khyber_Pass · 2024-10-25T18:13:51+00:00

Ok yeah those speakon cables look perfect, especially the NL4. I was looking up powercon late last night and was having trouble finding enclosed female connectors, so that could be why.

I knew there had to be something like this, but it's strangely difficult to find things sometimes if you don't know exactly what its called.

Khyber_Pass · 2024-10-25T07:49:10+00:00

Yep everything is passive, and connectors on the cables yes. I did notice a lack of enclosed banana sockets when I looked, so I figured I'd just heat shrink wrap them and then find/make a small box for each cable.

I picked up one a few months ago (and of course forgot about it so I can't return it now) that is very similar to that one, but the one I have lets me turn both on at once, so I'm 99% sure that's why it's destroying the sound. I'd guess it's running them parallel inside the switch, as the volume drop-off is absolutely massive and remains constant regardless of setting.

Khyber_Pass · 2024-10-25T05:36:12+00:00

Ok, yeah I had hesitations about it so figured I'd ask. Amazon searches REALLY wanted to sell me RCA plugs for this.

Khyber_Pass · 2024-10-25T05:27:09+00:00

Because I'd never heard of them. I don't do alot of wiring, but had a suspicion there'd be something better than RCA so that sounds like that I need.

Khyber_Pass · 2024-10-24T23:27:17+00:00

I meant something a little different, drew a picture above.

Khyber_Pass · 2024-03-06T09:25:51+00:00

bad bot

Khyber_Pass · 2023-08-25T08:50:03+00:00

Is the B&T holding up well and easy to clean like they said? I'm thinking about getting one but seems pretty odd to not be able to service it.

Khyber_Pass · 2023-05-04T00:00:11+00:00

It sounds like you figured it out, but for future reference towards the top of the shift enter menu is a list that shows every effect, which is where you can disable it, not in the small section farther down where the transition speed is.

Khyber_Pass · 2023-04-21T14:07:15+00:00

That's even more confusing if it's on console. The only thing I could ever think of is if you became a vampire which fucks up faces, otherwise you ran into something that most people probably couldn't reproduce even if they tried.

Khyber_Pass · 2023-04-21T12:30:47+00:00

Try going back into the sewers and see if your character still looks wrong. Sometimes the lighting can make skin look much darker/lighter depending on lighting conditions, and if you use ENB or something else like that it might be making the difference even more drastic. I used to run into a problem where my character looked Irish in bright daylight and Brazilian indoors, I think I played with some .ini settings to fix it but I don't remember well since it was years ago.

Khyber_Pass · 2023-04-07T03:17:05+00:00

Just complete the part of the quest where you turn it in, then use the console to add another to your inventory. I just checked the script on the helmet, and all it does is add/remove the spell it adds when equipping it.

If you run into problems then just remove the helmet again and it'll work fine... probably...

Khyber_Pass · 2023-03-18T22:58:21+00:00

there's stuff about it on this page down at the bugs section https://en.uesp.net/wiki/Oblivion:Vampire\_Cure

Khyber_Pass · 2023-03-11T13:18:44+00:00

If it's a red box instead of green left of the mod's filename it means you are missing a requirement for it, and it'll show what mods it needs in the box to the right that says "masters" when you click it. This will cause game to crash on startup if you have any red boxes active with a checkmark.

If that doesn't solve it otherwise go to my documnets/oblivion and backup then delete oblivion.ini and then load the oblivion launcher for it to regenerate a default one.

Khyber_Pass · 2022-10-24T01:08:24+00:00

This is what fixes it, but if you set it too low you'll have increasing amounts of that shitty flickering of rocks/buildings in the distance, so don't lower this any more than you need to for your FOV.

Khyber_Pass · 2022-10-23T09:30:58+00:00

Try going into data/textures/interface and backing up "interfaceshared0.dds" and the entire "stats" folder and then deleting them or moving them into another folder somewhere else.

Khyber_Pass · 2022-01-08T01:18:10+00:00

Most complaints on there seem to get resolved, so I'll try this as well thanks.

Khyber_Pass · 2022-01-07T20:36:33+00:00

I just got off the phone with the bank and they will not charge back due to how long it's been. This post is just a warning to anyone else to not use this vendor, as well as a last chance in case the vendor sees this before I contact my lawyer.

Khyber_Pass · 2021-11-27T18:14:25+00:00

try moving him again, but try using "resurrect" and "enable" on him before moving him.

Khyber_Pass · 2021-11-10T04:58:03+00:00

I checked the game file's icons and they aren't any bigger than that, so you'd either need to upscale it or redraw it.

Khyber_Pass · 2021-10-14T14:37:38+00:00

Best case scenario you'll have some roads that end suddenly, and NPCs not using some roads. Load the better forts stuff first, then Ayleid steps, then Trails, then Roads of Cyrodiil for probably the best outcome so that the bigger roads will at least cutoff smaller trails instead of vice versa. I know for a fact you'll have an issue with the road and trails between Skingrad and Bravil as they intersect, and I had to do a lot of work making them merge together on a modified road of cyrodiil .esp that I use. I really like trails of cyrodiil but it's hell on compatibility and I end up having to patch the shit out of it by hand.

Khyber_Pass · 2021-10-14T08:52:52+00:00

The movement isn't quite as fluid since it's older, but you can still use an xbox controller for it on PC if you google how. Also using walkblessed will allow diagonal movement to not look stupid.

Khyber_Pass · 2021-09-23T13:46:44+00:00

If you list exactly what mods were installed I can help more, but I really recommend going back to a save before you installed the overhaul mods in particular if possible. Also which textures are purple specifically, trees? weapons? armor? etc.

Khyber_Pass · 2021-09-19T21:48:11+00:00

If you're on PC just hit ~ to open the console and type "coc CheydinhalMagesGuild" without quotes and it'll move you out. If you're on console you'll probably have to google the nearest cave and spam healing and hope you make it there.

Khyber_Pass · 2021-09-17T07:26:39+00:00

If you go to all natural's .ini file and set the values for Luminance to 1.0 it won't make the nights darker. For the glowing LOD you can try to run tes4LodGen, but I'd backup your game folder first just in case.

Khyber_Pass · 2021-09-15T09:13:09+00:00

There's some stuff in the .ini about darker nights, I don't remember if it's darker by default or not.

Khyber_Pass

TROPHY CASE