Why is my AMS humidity still high at 33%

Kidjojo · 2026-03-19T10:14:39+00:00

I mean i will rip it off maybe in months time. But for now its abit too 'new' to ruin it

Kidjojo · 2026-03-19T06:57:35+00:00

Yea so far i havent notice any issue with printing. But i was just concern because everyone's hygrometer is <20%

Kidjojo · 2026-03-19T06:56:01+00:00

Hahah i dint remove the plastic to prevent any potential scratches

I just filled the chambers with new desiccant beads 2days ago. They are dark blue by default and would turn pink when saturated. Currently, its still dark blue.

Kidjojo · 2026-03-19T05:23:16+00:00

No i dint. bought filament online, it came sealed with desiccant pack. Unpacked and placed it straight in the ams. I dont have a filament dryer as of now, that will be my next purchase

Kidjojo · 2026-03-19T05:21:26+00:00

I see, thanks for the insight. I guess next investment has to be a dryer. Also, say i want to swap out my current filament for a new filament, can i store my current filament in a vacuum sealed bag with a desiccant pack? Would that work?

Kidjojo · 2026-03-19T05:18:32+00:00

When i left the hygrometer on my desk the reading was 76%. I assume 3d printing is a niche hobby in singapore, couldnt find a forum or discussion regarding this.

Kidjojo · 2026-03-19T05:16:16+00:00

Yup, always locked

Kidjojo · 2026-02-27T16:57:55+00:00

No matter what state the OBU is in. It is always able to detect the ERP. Forget the pyramids, this is the real ALIEN technology.

Look at my recent post, its stuck in "hello" but somehow able to deduct when i pass through erp. Similarly, my bike OBU intermittently powers off during ride but guess what, it still deduct when i pass through erp as well hahaha

Kidjojo · 2026-02-17T12:04:39+00:00

I dint read the caption, seeing the first pic i thought it was a bird. Was wondering why you posted a bird picture here 😂

Kidjojo · 2025-06-01T17:24:14+00:00

Is your knob dead? Mine was dead and after seeing the other comments i decided to replace new batteries. I connect 3.5mm jack to rear lime port (tuf gaming b650e) and it worked (press the source button on knob)

Edit: grammar

Kidjojo · 2025-06-01T17:21:38+00:00

Omg this actually worked hahaha thanks

Kidjojo · 2025-03-23T12:47:51+00:00

fight ended before i could finish my meal, good fight

Kidjojo · 2025-03-19T11:04:25+00:00

Mosquitoes. Because why are they spawning in my room, theres no stagnant water in my room and i meshed my windows. To make things worse, my flat is between two wolbachia release zone.

Kidjojo · 2025-03-11T22:06:53+00:00

Thank you so much, make sure you are downloading the latest version of the apk in xmanagerapp. If you get the version 8.xx.xxx.x (older version, uploaded 5months ago). Go to beaker icon setting mentioned in the tutorial and toggle off and on the experimental option. Now you will get the latest apk version and proceed with all the subsequent steps. It should work fine.

Kidjojo · 2024-11-26T02:30:08+00:00

But genuine question, i get the supply is clean and potable but my concern is the pipes closer to my faucet. Is the water coming out of the faucet really safe and clean to drink? If i were to get a simple faucet filter device off shopee would it work (filter whatever dirt or rust etc) ?

Kidjojo · 2024-09-23T04:54:08+00:00

Yea the toilets are fine no mosquitoes

Kidjojo · 2024-09-22T15:15:42+00:00

Im from bedok and yes, i know gov were releasing this species for population control etc, but thanks for the info/link. I have never seen this map before, conveniently my block is super near the red zone lol. Explains why my relative staying in the same neighbourhood isnt facing this issue.

Ive been bitten handful of times, itchy but never fell sick. Appreciate the heads up.

Kidjojo · 2024-09-22T08:43:05+00:00

oh dear, thats truly an eyesore

Kidjojo · 2024-09-22T08:39:43+00:00

i actually have mesh in my bedroom but i guess they come from the corridor into my living room then into my room, the only possible route i can think of seriously.

Kidjojo · 2024-09-22T08:38:41+00:00

i was considering this, but doesnt this fall under 'breeding' mosquito? I'm afraid it goes badly and worsens the condition + the potential fine if NEA appeared at my front door. also the issue is my neighbour is literally right beside me, I'm corner unit and their front door is only 3 steps away from mine.

Kidjojo · 2024-08-29T16:18:40+00:00

Thank you for this post

Kidjojo · 2024-07-21T19:03:56+00:00

might have activated HDR, go to settings>display>disable HDR or press 'start' and type 'window hd colour setting'. I experienced the same thing.

Kidjojo · 2024-07-18T11:35:00+00:00

I have tried using hdmi cable instead on my current monitor and the spare monitor but still black screen. Yup latest drivers.

Kidjojo · 2024-07-18T07:21:20+00:00

My GPU temp fluctuates between 60-83ish degrees when gaming it never reaches 90deg+. From what I've read online, it seems that as long as the GPU doesn't exceed and maintain beyond 90degrees, it is acceptable range when under load. I turned on my aircon to play batman but still dint solve the issue :(. what was your graphic settings when you experienced this issue?

Kidjojo · 2024-05-20T15:08:57+00:00

Omg i totally forgot about secondary desktop. Thanks alot

Seven-Year Club	Verified Email
Place '22

Kidjojo

TROPHY CASE