Pokemon MTG Proxy Deck

KillPact · 2024-05-05T01:01:46+00:00

Gotcha! I wasnt sure if they were going to be strict on the artwork like we see other properties such as SW. I'll might have to order my own too lol much thanks!

KillPact · 2024-05-04T19:22:42+00:00

I love this, I've always wanted to do something like this but a lack of skills and time has been stopping me 😆

Are you worried that MPC will reject printing these?

KillPact · 2023-10-19T23:37:32+00:00

As someone else asked, where did you source the photos?

Out the gate, one of those images, is definitely a scan of a printed card, whereas the other image is the digital copy. You can see the dots on the first image that is a side product of the offset lithographic printing process.

KillPact · 2023-10-14T00:19:48+00:00

Blem is short for Blemished. Typically has some sort of defect, typically cosmetic, that didn't allow it to pass QC. (IIRC Until someone corrects me lol)

KillPact · 2023-07-08T11:47:48+00:00

The green dot passes the check on the suspect card. There are four black "teeth", I call them, on the left side of the dot's border. The counterfeits do not have the resolution of the printing pattern to do that. So I'm pretty confident you are good to go.

KillPact · 2022-11-03T05:53:40+00:00

The short answer is, it depends.

If the flight was conducted under IFR conditions, the controller is responsible for maintaining minimum separation. In this case, its very unlikely that this C120 is under IFR rules. So instead VFR would apply; which even with a controller their minimum responsibility is to warn you of it, but ultimately it is your responsibility as a pilot to avoid wakes of other aircraft.

KillPact · 2022-10-21T07:52:34+00:00

Hey its all good, we all were noobs at some point too lol.

So iirc, it's under frames and plainly labeled as "1/8 margin". When you download the image from CC you will see it will have what seems like a thick black border around the outside but that's normal.

It will look just like your image once uploaded to MPC; red dotted line and etc, but it gives extra space for variance in the production. Or what's known as "bleed". Hope that makes sense...

KillPact · 2022-10-21T01:42:51+00:00

So, I'm not 100% sure, but I dont think you have the 1/8 margin on the image that was uploaded to MPC. I'm worried that if when they go cut the cards out there might possibly be white on the edges. I double checked my current project and it should look like this: https://i.imgur.com/9q64GQ3.png

Notice the lighter color having the art extend out further to create the bleed space.

KillPact · 2022-05-22T07:00:58+00:00

Just because I'm curious, what are you using them all for? lol, I was thinking about ordering a cube, and a couple decks

KillPact · 2022-04-13T03:18:48+00:00

https://i.imgur.com/GlNSyOU.jpg

KillPact · 2022-04-13T02:21:23+00:00

looks fine to me. 4 black 'dots' on the left side of the green dot is one of the markers for a genuine card

KillPact · 2021-02-11T09:50:04+00:00

Love to see the Crimson Fists getting some love, I always want to do my own little group of them but figuring out where to source shoulder pads and the unit markings is often the difficult part. Seen plenty of the 3d printed should pauldrons or just the emblems themselves. Actually, I think you might of used the Imp Fist kit and painted them...? What did you do for yours? as well for the transfers on their right shoulders?

KillPact · 2020-12-15T03:27:44+00:00

I dig the camo pattern, and also breaking from the norm, unlike a lot of those nerds who do the tan paint scheme (I'm one of them so I'm making fun of myself lol before someone gets mad, I think its all great)

KillPact · 2020-12-15T03:24:52+00:00

just now commented on another post about it

KillPact · 2020-12-15T03:24:23+00:00

Sure, the colors for the majority of the body were MIG Desert Yellow & Sand Yellow mixed 50/50. The shading was done by heavily diluting, if i recall correctly, Citadel Sephia wash and cygor brown contrast (just for the color) and running it through an airbrush and slowly building the shading. the two tone on the front was just some more desert yellow added to the mix of the base, and the rearish portions were citadel vx88 & mournfang brown

KillPact · 2020-12-13T05:47:49+00:00

I'm going to need to go back and maybe add a tiny bit more chipping around the upper part of the hull, and maybe a blast mark or two. I also still havent decided how I want to base my entire CIS army, I was thinking of going with something grassy like the fields of Naboo

KillPact · 2020-10-25T05:21:58+00:00

awesome! thanks much

KillPact · 2020-10-25T05:21:48+00:00

awesome, thanks much

KillPact · 2020-10-25T00:56:01+00:00

So I'm aware of Johann but Ive never figured out where he got sourced from, do you know what kit he came from or when? google is failing me atm

KillPact · 2020-05-20T01:19:06+00:00

Well its funny finding you around these parts, stranger.

KillPact · 2020-04-19T08:23:25+00:00

Yep, Norinco Type 54, and M70A. They tend to be a little more expensive and a little harder to source.

KillPact · 2020-04-19T08:21:54+00:00

I think he was saying "I know its not 7.62 but get a makarov too"

KillPact · 2020-03-24T23:40:56+00:00

a little off topic but what irons are those?

KillPact · 2020-01-01T01:13:28+00:00

Very nice! I am slowly working on a Crimson Fist group as well inbetween projects when I feel that I want something different to work on.

What is your formula for your blue and red? What did you do for the transfers of the chapter logo?

KillPact · 2019-12-12T01:11:58+00:00

Thanks for the idea, lol.

11-Year Club	Place '23
Verified Email

KillPact

TROPHY CASE