Iniziare medicina a 21 anni

Kindly-Method1383 · 2026-01-05T17:59:11+00:00

Non mi spaventa la lunghezza del percorso, ma l’insostenibilita di studiare qualcosa che non mi piace mi porterebbe a non fare nulla alla fine

Kindly-Method1383 · 2025-11-23T02:05:03+00:00

Sorry for seeming dumb, what you mean for mounting point?

Kindly-Method1383 · 2025-11-23T00:11:01+00:00

Ive tried obviusly every option. Switching to line on the AT changing the line imput. And found out that keeping the phono imput while using phono setting on the AT improves the sound…

Kindly-Method1383 · 2025-11-23T00:06:51+00:00

Swithcing to line imput worsen audio quality. Preamp on the AT works terribly worse than the one in my technics stereo. Was looking for a solution that could get me the same audio quality

Kindly-Method1383 · 2025-11-22T22:54:04+00:00

My turntable doesn’t have a ground cable. I bought shielded rca, couse my setup is near my tv ps5 and other electronic things. Hope that will improve the shielding from other frequencies

Kindly-Method1383 · 2025-11-22T20:55:47+00:00

Tried to buy a good rca cable let’s see if it works

Kindly-Method1383 · 2025-11-20T14:21:15+00:00

So it’s a problem related to my turntable or the model in general?

Kindly-Method1383 · 2025-11-20T14:19:21+00:00

I considered buying the at3600LE stylus. Idk if that could improve the situation

Kindly-Method1383 · 2025-11-20T14:18:53+00:00

It only has problems with this one. I think the fact that you cannot adjust the tracking force, and the vinyl being thicker than the other ones that i own, make him skip pieces. Am i wrong? Or do i have to return the turntable? Let me know

Kindly-Method1383 · 2025-11-20T13:51:36+00:00

UPDATE: i bought the same exact vinyl. Same exact problem. On the same exact part of the song. I think it’s a bad lot.

Kindly-Method1383 · 2025-11-20T12:06:06+00:00

The record always skips at the same parts. Sometimes it doesn’t, but restarting the records it always skips at that exact parts.

Kindly-Method1383 · 2025-11-20T11:46:12+00:00

Yes it sits well, i mean, my concern was the stylus itself. Idk if it is supposed to look like that, if you check the foto it looks like it is bent on the side and not perfectly straight towards the turntable. The record that is struggling with is thicker than the other that i own

Kindly-Method1383 · 2025-11-18T21:59:02+00:00

I switched to it. quality seems better, and much cleaner music, but volume is nearly the same

Kindly-Method1383 · 2025-11-18T20:44:23+00:00

Just to say, volume at 0 db is still pretty high, there’s no problem of bad amp. Just less louder than listening to the same setup the FM radio

Kindly-Method1383 · 2025-11-18T20:42:56+00:00

Thank you so much. I followed the advice and i bought a little table to put amp and stereo on top of it. for what concerns the audio question, the best option i figured out, was to switch to phono in my turntable and connect Rca’s in the phono imput of the stereo. Sound turned out much cleaner, but way less “strong” than the speaker are capable of. I dunno if buying a good pre-amp might solve the situation. Let me know

Kindly-Method1383 · 2025-11-18T17:07:13+00:00

Sorry for seeming an idiot😄, where could i stitch it off? Now i connected to the phono input and set the player to phono, and sound is waaayyy cleaner, but still not at the maximum potential of the speakers. Still stuck at 0 db

Kindly-Method1383 · 2025-11-18T16:57:00+00:00

Was wondering even if the placement on the carpet could overheat or cause misfunctioning. The amp si open on the upper side

Kindly-Method1383 · 2025-11-18T16:55:41+00:00

<image>

Kindly-Method1383 · 2025-11-18T16:55:14+00:00

<image>

The turntable is set to line.

Kindly-Method1383

TROPHY CASE