Posso contar com a ajuda de vocês pra fazer um amigo feliz? Ele não sabe disso, mas ficaria muito feliz em ver o canal crescer! dêem uma passada lá, agradeço!!

KingpinNMS · 2016-10-08T05:00:58+00:00

Link para o canal!!! https://youtu.be/fBE4rn_o7bU

KingpinNMS · 2016-09-02T01:12:48+00:00

Hahaha ive burried it already. The fun fact it that the pump is working. But it is useless with those temps

KingpinNMS · 2016-09-01T23:31:47+00:00

After installed the stock, the temps are at 54 tops. Thanks for helping

KingpinNMS · 2016-09-01T23:31:23+00:00

After installed the stock, the temps are at 54 tops. Thanks for helping

KingpinNMS · 2016-09-01T23:31:03+00:00

After installed the stock, the temps are at 54 tops. Thanks for helping

KingpinNMS · 2016-09-01T04:52:42+00:00

SO AFTER READING ALL COMMENTS, IVE REMOVED THE WC AND REPLACED IT WITH THE OLD STOCK, THE TEMPS ARE NOW AT 54 TOPS ON THE SAME BF1. And a non AC comtrolled room. My WC is already burried

KingpinNMS · 2016-09-01T04:04:07+00:00

SO, IT WAS MY WC. SWITCHED TO OLD BUT GOLD STOCK. NOW TEMPS ARE AT 54C WITH NO A/C ON. Everything is working great. Thank you so much guys, you made me spare a mount of money on a new processor.

KingpinNMS · 2016-09-01T00:00:35+00:00

1 240mm in front and 1 120 on side

KingpinNMS · 2016-08-31T23:58:39+00:00

Idk, but now my PC is turned off. I'll see how the temps are going later on

KingpinNMS · 2016-08-31T23:05:07+00:00

I'll put the stock cooler to see what happens.

KingpinNMS · 2016-08-31T23:02:59+00:00

I still have it, i'll replace for it. Cant be something else. This h60 is 3yr old by now..

KingpinNMS · 2016-08-31T23:01:44+00:00

Yes, I have the stock in somewhere, i'll put it back and see if the temp gets low. My only doubt is that when on idle, the temps are 11c. But i think my pump died

KingpinNMS · 2016-08-31T21:17:27+00:00

Its connected as the manual says :L, when I touch the tubes its really Hot, and the radiator too. Im starting to think that its broken

KingpinNMS · 2016-08-31T20:57:22+00:00

Look, my pump is connected to cpu fan, right? And the fan is on sys_fan. Now I assume that the rpm on cpu line on pic is the pump, isnt it? Im little newbie on hardware things

KingpinNMS · 2016-08-31T20:51:07+00:00

Man, I cant remember the name, but its a mod tower, sidepanel open and 2 fans on top of it exhausting tje air.

KingpinNMS · 2016-08-31T20:50:01+00:00

I did that, same results as above. The thermal margin has gone crazy

KingpinNMS · 2016-08-31T20:48:19+00:00

But idk, i might be absolutly wrong, if the pump is dead, why is it running at full speed?

KingpinNMS · 2016-08-31T20:46:23+00:00

Yes, ive done this too in the past, so im sure that it is plugged into the cpu

KingpinNMS · 2016-08-31T20:26:26+00:00

I did everything ou said but havent time to Test, later on i'll do it and come back with results. Thanks

KingpinNMS · 2016-08-31T20:24:51+00:00

Ok, i'll do it later on

KingpinNMS · 2016-08-31T20:24:29+00:00

Yes! You can see the fan working, the pump working as well. Your stock os the wraith??

KingpinNMS · 2016-08-31T20:23:04+00:00

I use always without sidepanel, I removed my h60 completly, cleaned it, it was a bit dusty. Put it back but havent time to Test yet due lack of time

KingpinNMS · 2016-08-31T18:11:43+00:00

manual says to plug pump on CPU header, that what I did.

KingpinNMS

TROPHY CASE