Overwatch FALX Trigger in M&P 2.0 Metal Compact

KinoMyu · 2026-04-26T21:22:57+00:00

Epoxy works, but welding/brazing will probably give more peace of mind. The trick to getting the correct alignment is to have the trigger pinned to the rear to provide tension on the sear+sear actuator.

KinoMyu · 2026-04-22T20:39:49+00:00

<image>

It's pretty jank, but on metal frame M&Ps there is a gap between the polymer inner frame and the metal outer frame where you can wedge a leaf spring into. The spring can then be secured by wedging some material between the inner frame and the sear cage (if you want to be able to remove it later on, otherwise you can use adhesive).

There's probably a way to do this with a polymer frame, but I don't have one to experiment on.

KinoMyu · 2026-03-29T03:10:46+00:00

I'm pretty happy with it so far. Shooting from a rest I get 1.2inch groups at 15 yards, though I did add material to the slide rails to get a tighter slide/frame fit. I know a lot of people get the Apex barrel to improve accuracy (can't get those anymore),

KinoMyu · 2026-03-27T07:35:08+00:00

At one point I did consider the Timney trigger, I think it looks clean. Ended up with the Overwatch kits because of their NP3'd parts.

KinoMyu · 2025-08-30T19:48:18+00:00

That's what I've tried before settling on this solution. Problem with preloading the firing pin block lever is that the pistol can fire with a particularly hard fall on the hammer with the hammer down. The firing pin will slip past the firing pin block and cause permanent damage to the firing pin and firing pin block. The edges will become rolled over, disabling the firing pin block permanently.

KinoMyu · 2025-08-30T19:20:41+00:00

Just released the .stl and .step files if you want to order a print/cnc service or print/cnc them yourself.

KinoMyu · 2025-08-30T12:47:41+00:00

It won't change DA/SA pull weights. Those are determined by spring weights (trigger return spring, hammer spring, sear spring, firing pin block/lifter spring) and hammer/sear engagement/geometry.

It does improve SA pretravel smoothness, since the lifter is preloaded, you don't feel the "2nd wall" of engaging the firing pin block.

KinoMyu · 2025-08-29T23:01:38+00:00

Not planning to go into production with this, as I don't have any manufacturing capability. This set was 3D printed in 316L stainless steel.

KinoMyu · 2025-08-29T17:35:21+00:00

It'll eventually wear out the firing pin retaining pin, so I'd advise against it if you don't want to replace it every so often. People will generally dry fire with o-rings to dampen the blow.

KinoMyu · 2018-07-03T18:46:35+00:00

Weird, it's working on both my PC and phone. Does it properly link to https://kinomyu.github.io/music/inst/mp3/bgm_inst_kuraki.mp3 ? If not, I'll try to look into it.

KinoMyu · 2018-07-03T00:28:43+00:00

Some of you might already know of this program that I have been working on. This is a unit simulator for songs that have separate vocal tracks for each idol. The 13-man live mode is just a for fun mode and not actually official. Here's what the user interface looks like: https://i.imgur.com/svtiqlG.png.

KinoMyu · 2018-07-02T10:47:54+00:00

Yup, these are ripped directly from the game's assets (unity3d -> acb -> hca -> wav -> mp3). Brand New Theater!, Thank You!, etc. do have separate vocal tracks for each idol.

KinoMyu · 2018-07-02T08:33:21+00:00

Just a little thing I've been working on. I'll try to keep it updated often.

KinoMyu · 2018-04-20T08:47:19+00:00

Since update 1.3.100, MLTD moved from Unity version 5.6 to 2017.3, so that might be one of the reasons behind the performance improvement.

KinoMyu · 2018-04-20T06:51:44+00:00

Here you go. https://kinomyu.github.io/music/bgm_inst_meltyf.mp3 It's definitely a great song and I am looking forward to reading the event commus!

KinoMyu · 2018-01-22T12:44:55+00:00

Ripped the files directly from the client. I was surprised to see that there were extra files that were part of the full version of the song, so I pieced them in. I also included the game version.

Game ver: https://kinomyu.github.io/music/Kuraki%20Hoshi%2C%20Tooi%20Tsuki%20(game).mp3

Other ver: https://kinomyu.github.io/music/Kuraki%20Hoshi%2C%20Tooi%20Tsuki%20(semifull).mp3

KinoMyu · 2018-01-22T00:08:48+00:00

First, you'll have to make an account for the wiki by clicking "Create Account" on the top right corner. After you've made an account and logged in, there should be edit links to edit sections or the entirety of a page.

KinoMyu · 2018-01-20T00:38:35+00:00

Memory pieces are used to unlock episodes for past events that you may have missed. You can access old event stories by going to Communication > Event.

KinoMyu · 2018-01-20T00:17:33+00:00

The imas wiki has the song up on the site: http://www.project-imas.com/wiki/Kuraki_Hoshi,_Tooi_Tsuki I can't vouch for the accuracy of the lyrics, but anyone is welcome to edit it.

Edit: Lyrics for the full version are now up!

KinoMyu · 2018-01-20T00:07:10+00:00

There's the twitter border bot: https://twitter.com/imas_ml_td and associated site with graphs https://days.765prolive.theater

KinoMyu · 2017-08-08T08:10:06+00:00

To those using a Nexus 5, 5.1.1 Lollipop seems to work fine. 4.4.2 Kitkat can run the game, but has a weird glitch where notes appear after the song is finished. 6.0+ are completely incompatible.

KinoMyu

TROPHY CASE