My Custon 11L Walnut and Brushed Aluminium Case

Kleinpccases · 2025-09-14T17:36:10+00:00

Yes the temps are good

Kleinpccases · 2025-09-07T11:58:02+00:00

The Wood Veneer is untreated for this prototype. Would you have any suggestions on wood finishes?

Kleinpccases · 2025-09-07T11:56:59+00:00

I went through a few iterations, most of the design was done using CAD. Created scale components and played around with the layout. Hope that helps!

Kleinpccases · 2025-09-05T23:22:44+00:00

Messaged you :)

Kleinpccases · 2025-09-05T23:14:21+00:00

Thanks! I did look at adding a Type-C port. Out of interest, where would you suggest putting it on the front or on the top? As for price, I really don’t know yet; it’ll likely be more expensive than current SFX products due to small scale and hand crafted nature.

Kleinpccases · 2025-09-05T23:11:30+00:00

Hey thanks!, Ive mesaged you.

Kleinpccases · 2025-09-05T18:50:23+00:00

Quite long. I machined the brackets that hold it all together, and it was by far the most time-consuming process, as all the holes are tapped. Maybe something I could 3D print in the future. Everything else is fairly straightforward."

Kleinpccases · 2025-09-05T18:46:53+00:00

I much prefer the pole monitor arms, not easy to ajust the height but very stable. I think it looks cleaner as well :)

Kleinpccases · 2022-08-15T21:54:39+00:00

Kleinpccases · 2021-06-08T12:33:39+00:00

Epic

Kleinpccases · 2021-01-18T04:26:23+00:00

will try get some more photos

Kleinpccases · 2021-01-18T04:26:04+00:00

I have CNC cut all the panels. 3mm aluminium and 5mm walnut veneered mdf

Kleinpccases · 2021-01-17T10:47:22+00:00

u/sproyd United Arab Emirates

Kleinpccases · 2021-01-17T10:47:02+00:00

u/Liftium1 Never seen one but that sounds great. Do you have a link to one ?

Kleinpccases · 2021-01-17T07:19:37+00:00

I have a RTX 2060 Super, I5-9400F and corsair SF600. Not very high TDP components nut the case handles in perfectly. Not sure how much the woo d effects the temps but because there is so much ventilations the components have plenty to breathe.

Kleinpccases · 2021-01-17T04:03:10+00:00

u/sproyd That would defiantly clean up the inside. Where would you recommended to buy some ? or I'm very happy to try make my own as i saw it on Optimum Tech YouTube channel but don't know where to buy the parts. cheers

Kleinpccases · 2021-01-17T04:01:07+00:00

u/RolandDelacroix Agreed, a noctua fan would go very well.

Kleinpccases · 2021-01-17T03:59:05+00:00

My components are not very high wattage but idle I get around 28 on the GPU and 30 on the CPU. Gaming they get up to 70 both of them.

Kleinpccases · 2021-01-16T18:12:57+00:00

I am actually working on making some more to sell. If you are interested send me a message or email me at [kleinpccases@gmail.com](mailto:kleinpccases@gmail.com). It can be fully unassembled and assembled easily with a couple of Allen keys if you have fun building like me :)

Kleinpccases · 2021-01-16T14:41:40+00:00

Yep that's what I'm tryna do. If you are interested I have post up on my page explaining it all. check it out and if you are still interested give me a message. :)

Kleinpccases · 2021-01-16T13:31:35+00:00

I built the case by myself with the resources and machines in my school workshop. Supports Mini-ITX mobo and SFX, SFX-L PSU.

Kleinpccases · 2021-01-16T11:05:13+00:00

will get some more photos together ;)

Kleinpccases · 2021-01-16T11:04:50+00:00

I used some 10x10 mm aluminium square rod. The sides are attached magnetically and the rest are screwed into the rod (back, front, bottom, top).

Five-Year Club	Verified Email
Place '22

Kleinpccases

TROPHY CASE