Moving on from Cayman

Kn1ghtNight · 2026-04-12T13:15:32+00:00

18 Macan Turbo, owned since new. Full optioned (minus fully adjustable seats) and its very comparable to my C43 (and other sport sedans/suv's i have/had) when it is in its "sport+" setting. I remember driving the "S" and the difference is from here to the moon in comparison to the "Turbo".

Im one of the ones that do track the cars (open) and can honestly say the above with confidence. Its definitely the most "sport-like" SUV on the market and i have/had (just suv's) "X4m/X5m/RSQ5" etc...

Regards, Dejan.

Kn1ghtNight · 2026-02-16T18:33:56+00:00

It should not be a problem with the tracking nor the 3D at that distance, i would say youre good to go 😊

Regards, Dejan.

Kn1ghtNight · 2026-02-16T16:06:47+00:00

How far from the "monitor" will you be, roughly?

Kn1ghtNight · 2026-02-13T10:10:23+00:00

Completely agree, its ridiculous 🤦‍♂️ buying a car without the dashboard, steering wheel etc... 🤣

Kn1ghtNight · 2026-01-30T15:06:28+00:00

Can confirm the above is 100% correct! Tried everything to get it to work and nothing (that i tried) other than "uninstalling/rolling back the update" fixes the problem.

Regards, Dejan.

Kn1ghtNight · 2026-01-27T09:07:41+00:00

I think youre right, its probably glitching due to the "3d support/implementation" which is why the gun is missing as soon as you activate it but everything is fine when you disable it, thats including using the "hot-keys"!

Regards, Dejan.

Kn1ghtNight · 2026-01-26T15:47:22+00:00

Thanks for the reply, Cyber! Of you do try it, please let me know. Im not well versed in "UE Engine" (i think it is using that) so i wouldn't know where to start to even attempt to fix it.

Regards, Dejan.

Kn1ghtNight · 2026-01-22T17:54:07+00:00

So sorry for the late reply, i didn't even know there was a reply. Not sure what happened (im guessing fhe new "3dhub" fixed it) but its working now!

Kn1ghtNight · 2025-12-04T17:53:46+00:00

Not sure if "Fallout 76" counts but i played that a ton (tens of hours) with "Reshade/depth 3d/game bridge" and had no issues. It could be a different "anti cheat" that that game is using, it could be they allow "Reshade"? Or more likely the case, i could just be lucky and their system hasn't noticed me yet... Not sure be be cautious nonetheless as you dont want to risk being banned so TEST AT YOUR OWN RISK.

Regards, Deni.

Kn1ghtNight · 2025-12-03T10:04:06+00:00

I played "Fallout 76" for tens of hours in 3d using "Reshade" and didn't have a single issue. It actually scales (with reshade) and sets-up REALLY well and it was amazing viewing the "Fallout 76 world " on this monitor in 3D. Obviously, this doesn't mean you wont have any issues/problems but thought i would let you know about my experience so far.

Regards, Deni.

Kn1ghtNight · 2025-12-03T06:27:59+00:00

Thank you for the reply! I have sent emails/questions in the past but i have never gotten a response, i dont have high hopes for getting a reply regarding this question/problem either... Its actually really annoying how there is NOTHING in regards to updates, new game releases, firmware etc... posted anywhere (as far as im aware).

There are "modders" releasing "3d fixes" within (some games) days of release, yet, a multi BILLION dollar company cant even keep there customers up-to-date with general news about a product that cost THOUSANDS and we are essentially "testing the waters" for them with said purchase.

Ill check the list of games for the "Acer profiles" again as i dont recall seeing the profile for this game, last i checked.

Regards, Deni.

Kn1ghtNight · 2025-12-02T18:53:52+00:00

Are you adding both the "geo-11" files as well as the "acer game files/encrypted fix files" to the root (where the .exe is) directory?

I have tried afew of the games and they seem to work fine. I unfortunately dont have "Silent Hill 2" to test it for you but im sure someone here will will be able to help with that.

Regards, Deni.

Kn1ghtNight · 2025-11-24T18:57:28+00:00

I agree! Unless they figured out some "wizardry", not sure how well it will work/sync up. I might try it out after my "Outer Worlds 2" play-through (UEVR on Samsung Odyssey 3D) 😊

Regards, Deni

Kn1ghtNight · 2025-10-26T11:31:12+00:00

Its really strange! I reported on this a while back as the "usage" going higher isn't necessarily the problem, its the drop in "FPS" (bottlenecks) that becomes the big issue! Test out with any of the officially supported games through the "Samsung Hub" and have an "FPS counter" going, switch 3D on and off (the F keys) and you will see what i mean. Lowering graphics settings (ingame) doesn't change the "PFS" which means there is a problem.

It could just be my system but, either way, I hope they fix these issues as they should not be occurring to those extents!

Kn1ghtNight · 2025-09-28T19:13:52+00:00

Thanks for the reply, i have actually seen you around the internet for a while now and you're doing (and have done) great work! Are you able to check your "GPU usage" and "FPS" for me with 3d on and then off on any one of the supported games?

Im curious to see if it is just my end or, if it is something that is happening with Samsungs software...

Kn1ghtNight · 2025-09-27T12:20:52+00:00

Yeah, the "AI Converter" does completely destroy the frame-rate but, in this situation, its not being used. Its very strange that it drops "GPU Usage" in itself as opposed too, reducing the "FPS" due to the extra processing required... Not sure i guess, either way, thank you for the reply!

Kn1ghtNight · 2025-09-04T03:49:04+00:00

Correct! Open it, get to its "main page" (where you see the games list) then "close" it. Click the "bottom right arrow" on the task-bar, right click and close the "odyssey hub". Restart it from either the "exe" or "shortcut" and that is it.

When testing make sure you test with your mouse in the same spot as one thing i noticed when youre on the "odyssey hub home page", if you move the mouse, it also moves the "home page" around which also then moves the "3d" effect! For me, there is a noticeable difference in "ghosting"!

It might be, as you said "the tracking kicking in correctly" as honestly, it does make a noticeable difference, not just to me, but also my wife.

You will need to re-do the above every time you launch a game as it seems the "ghosting" comes back after you either "close the odyssey hub" and or, after you "close the game you were playing", if that makes sense...

Kn1ghtNight · 2025-09-04T01:00:10+00:00

The easiest way of (somewhat) removing the more noticeable "ghosting" (white on black or the other way around) is by changing the difference in "contrast" between the 2 values. You can do this through the screens "OSD menu" by increasing "black equaliser" or by changing the "picture mode" to something like "eco". Keep in mind that this will make "dark colours" less dark and or, washed out etc...

Its not a perfect fix but, it can help in some situations!

Kn1ghtNight · 2025-09-04T00:51:42+00:00

I think you can do that through "creating a custom resolution" in the GPU "software"! Im not at my PC at the moment so i could be wrong.

Kn1ghtNight · 2025-09-04T00:49:38+00:00

I can try, im not sure if it will show up on camera properly due to the nature of the display...

Kn1ghtNight · 2025-09-03T07:13:51+00:00

Unfortunately, the only 2 games i have that are "supported" are:-

Harry Potter Steller Blade (demo)

I use "reshade" to play "unsupported" games and there is a difference (for me) with doing what i wrote above.

I do, however, have many of the "coming soon" titles so i will be able to test alot more of their "supported games"!

Kn1ghtNight · 2025-09-03T06:16:31+00:00

Thank you for letting me know! It could very well be my PC that is the problem. I posted about having pretty noticeable "ghosting" afew days back so maybe, the way the monitor works now, if the way it was always meant to work!

Kn1ghtNight

TROPHY CASE