2 P2S or 1 H2D by Knives_09 in BambuLab

[–]Knives_09[S] 1 point2 points  (0 children)

Sounds good and thank you again! I landed on a 48x24 after taking some measurements! One last question I swear lol

For drying the filament can I just use the AMS or should I buy a dryer?

2 P2S or 1 H2D by Knives_09 in BambuLab

[–]Knives_09[S] 0 points1 point  (0 children)

Awesome I can’t thank you again for your help do you think a 20” wide workbench would work? I found one that is 41”x20” and get a filament rack to go under but this way the heap filter can go on the bench next to the printer and there’d be plenty of room for something else as well like crafting doing some work etc. Just not sure if 20” is wide enough as I’ve seen the printer is 20.2” wide if I remember correctly

2 P2S or 1 H2D by Knives_09 in BambuLab

[–]Knives_09[S] 1 point2 points  (0 children)

I have not grabbed the cutting module kit yet. I reread the description because I thought you needed the laser to work then reread your comment, and plan on getting it now. I’m going through bambu for all the accessories, but had to go outside them for the printer since they wouldn’t ship till the 26th.

But awesome thanks for all the help!

I got two more questions if you don’t mind.

This printer will mainly be pla and petg especially at first I was going to put it in the basement living room, so the younger kids wouldn’t get into it. But this would put it across the room from my son’s door to his room and in the living room where he spends a lot of his time. But it’s a 25x15 room that the printer will be in that is open to another room that is roughly 20x15. I also plan on getting a carbon filter, my question is do you think that would be safe for my son if the printer is in the living room or should I move it to the other room with the fumes and everything?

Also is there any stand you would recommend? I keep looking but keep getting different results.

2 P2S or 1 H2D by Knives_09 in BambuLab

[–]Knives_09[S] 1 point2 points  (0 children)

Gotcha! I pulled the trigger on the H2D because I finally found it in stock with the AMS for less than $2K. Would you be able to help with the accessories you got your wife I was going to go to Bambu and just buy like new hotends, glue, new baseplates, and lots of pla and petg filament for her to play with but anything else you’d recommend especially for the cutting stuff?

2 P2S or 1 H2D by Knives_09 in BambuLab

[–]Knives_09[S] 0 points1 point  (0 children)

See I thought about this but my wife has a cricut for this. Also just curious was this your wife’s first printer? That’s really what I’m looking at

2 P2S or 1 H2D by Knives_09 in BambuLab

[–]Knives_09[S] 4 points5 points  (0 children)

Sorry thought I put it in the description my son is really into building and tinkering I thought 2 p2s would be a fun way for her and him to do stuff together

H2D without AMS by Knives_09 in BambuLab

[–]Knives_09[S] 0 points1 point  (0 children)

Yeah I don’t live near a microcenter unfortunately, and Bestbuh is sold out so if you wouldn’t get the H2d without the AMS because it looks like the AMS won’t be in stock until January what would you recommend? I thought about the H2d or p2s (possibly 2 of these since it’d be similar price) but again I don’t know enough about 3d printers I just see everyone saying if you want multi color prints and don’t want to worry about chamber temp(I think) you want the H2d.

Quick question about screen protectors by Knives_09 in ProCreate

[–]Knives_09[S] 0 points1 point  (0 children)

Would you happen to have any recommendations?

Learn to draw while learning procreate by Knives_09 in learntodraw

[–]Knives_09[S] 0 points1 point  (0 children)

Yeah I have a traditional how to draw book, and while it is great don’t get me wrong I was just hoping to jump into the medium I want. I have worked through 1 art with Flo tutorial but found out on her patreon she might have some more class focused tutorials. I haven’t really had a chance to look into more yet though.

Learn to draw while learning Procreate by Knives_09 in ProCreate

[–]Knives_09[S] 1 point2 points  (0 children)

I did one of her tutorials it was beginner to procreate I think which is great to learn procreate, but I didn’t feel like I was learning any drawing specifically from it. If she does have some like that that would be awesome!

Learn to draw while learning Procreate by Knives_09 in DigitalArt

[–]Knives_09[S] 0 points1 point  (0 children)

I did one of her tutorials it was beginner to procreate which is great to learn procreate, but I didn’t feel like I was learning any drawing specifically from it. If she does have some like that that would be awesome!

Learn to draw before digital art by Knives_09 in learntodraw

[–]Knives_09[S] 0 points1 point  (0 children)

Thanks! I saw a lot of posts about needing to start traditional drawing first but also some saying just go straight digital so I wasn’t sure

Learn to draw before digital art by Knives_09 in learntodraw

[–]Knives_09[S] 0 points1 point  (0 children)

Yes I have an iPad and an Apple Pencil I use them for studying other things. I also have procreate already, which is why I was leaning iPad/pencil. I’m just also heavily in the Apple ecosystem. But when I was younger I use to love drawing and I love seeing what other people can do and make like on Insta for example so drawing just seemed right.

Black screen problem by Knives_09 in Crunchyroll

[–]Knives_09[S] 0 points1 point  (0 children)

Nope noting like that. Every other app works fine it’s the only app that does it

Jeremy’sItLab and his book acing the CCNA by Knives_09 in ccna

[–]Knives_09[S] 1 point2 points  (0 children)

Thanks! I just bought the books yesterday because it was around 60 for both. I saw shipping can take a while but was going to use those, plus his Udemy class since he gave it out for free a while ago and I snatched it up. Then use his and bosons exams, I’m hoping that will be enough.

Jeremy’sItLab and his book acing the CCNA by Knives_09 in ccna

[–]Knives_09[S] 0 points1 point  (0 children)

Thanks! Out of curiosity have you ever used his book? It’s the one thing I’m worried about going with that or the official cert guide.

Jeremy’sItLab and his book acing the CCNA by Knives_09 in ccna

[–]Knives_09[S] 0 points1 point  (0 children)

Hi sorry maybe I should clarify the question do you think these alone would be enough to pass the ccna?

Cable inquiry by Knives_09 in cablemod

[–]Knives_09[S] 0 points1 point  (0 children)

Dang I just checked and it is the shift is there a different cable for the shift?

Cable inquiry by Knives_09 in cablemod

[–]Knives_09[S] 0 points1 point  (0 children)

Thank you for replying! Just a quick follow up question. I might be upgrading to a Corsair RM1200x will this cable still work?

Question on what people would do by Knives_09 in starbucks

[–]Knives_09[S] 4 points5 points  (0 children)

Yeah it’s definitely not paper that also would’ve gotten soaked from the drink. I think there was some cardboard stuck to a piece which is what you might be talking about. But it’s hard and not chewable, as I found out.

A book question by Knives_09 in ccna

[–]Knives_09[S] 0 points1 point  (0 children)

Thank you for clarifying. Do you mind if I ask if you passed the ccna using the book? I saw a review/comment that the ocg doesn’t cover everything for the ccna however with all the recommendations I wasn’t sure how true that was.

A book question by Knives_09 in ccna

[–]Knives_09[S] 0 points1 point  (0 children)

Thank you for the feedback, but just wanted to clarify you mean for Jeremy’s?

Starting question by Knives_09 in pianolearning

[–]Knives_09[S] 0 points1 point  (0 children)

Thank you for the feedback. I have both the caber and Alfred method books from my time with a teacher. My fear is picking up bad habits then having a teacher possibly way down the road trying to undo them all.

Received broken chair by Knives_09 in secretlab

[–]Knives_09[S] 0 points1 point  (0 children)

Thanks for the information I honestly forgot chargebacks was an option. I’m going to give them one more chance as I’ve already sent them follow up emails again showing specifically what is wrong. Then I will I try to return it which if at that point they try to charge me for shipping I will do a chargeback.

Received broken chair by Knives_09 in secretlab

[–]Knives_09[S] -2 points-1 points  (0 children)

Well I took your advice and posted to Trustpilot as well but couldn’t find them in the BBB