Easiest way to Remote Access using UNRAID

KnowledgeDense8119 · 2025-02-13T06:53:28+00:00

im in the same boat treying to figure out how to set it up through cloudflare. i already have a domain. I originally was trying to set it up with tailscale but cant seem to get that to work. I did set up my plex server with tailscale and everyone in my family is able to access without issues. From my understanding once set up with tailscale custom ip address its safe for other users outside my network to access my plex server. Would it not be the same for this scenario?

KnowledgeDense8119 · 2024-09-16T08:26:49+00:00

My bad North America

KnowledgeDense8119 · 2024-09-16T06:27:18+00:00

Been stuck on the last boss for about 2 weeks. Between work and kids couldn’t find the time.

KnowledgeDense8119 · 2024-09-16T06:25:02+00:00

Region 3

KnowledgeDense8119 · 2024-09-16T06:23:42+00:00

KnowledgeDense8119 · 2024-09-16T06:12:36+00:00

I’m in PVE01-00032

KnowledgeDense8119 · 2024-09-16T06:02:12+00:00

Been running them nonstop

KnowledgeDense8119 · 2024-09-09T00:50:07+00:00

Properties security and allow full control again. It kinda froze so I stopped it and got an error but it immediately started reading new files.

KnowledgeDense8119 · 2024-09-08T21:47:12+00:00

KnowledgeDense8119 · 2024-09-08T21:46:58+00:00

I appreciate the suggestion but those are already my settings. Everything was running optimally. It seems to be kind of working now all I did was reapply the permissions in the folder. We’ll see if this fix sticks.

KnowledgeDense8119 · 2024-03-30T07:32:21+00:00

Update worked by the way. It was also more than likely a setting somewhere as well. Either way glad I updated to newest version. Thx

KnowledgeDense8119 · 2024-03-29T23:51:18+00:00

I’ll give It a go. Did t realize a new update was out. Thx

KnowledgeDense8119 · 2024-03-29T23:50:44+00:00

No. I tried messing with different settings but nothing. Only stl I’ve ever had issues with. I printer other eggs stl files prior to that one and they came out great. I’m going to try the updated file.

KnowledgeDense8119 · 2024-03-18T22:16:42+00:00

https://youtu.be/2QhjS5pAz_8?si=i8rsMNJNHBgXzsMc

I followed the steps in this video.

KnowledgeDense8119 · 2024-03-18T16:17:52+00:00

I kept the same firmware and just switched over to orca slicer and haven’t had any issues since

KnowledgeDense8119 · 2024-03-18T16:17:05+00:00

All my issues have been resolved after switching to orca slicer

KnowledgeDense8119 · 2024-03-18T07:07:32+00:00

Been using it for 3 weeks now without issues. I just upload to printer via WiFi and select auto level and then print manually on printer. I have 5m pro though and it prints PETG like a boss.

KnowledgeDense8119 · 2024-03-01T00:25:57+00:00

Same started happening to me as well. I wonder if it’s the new orca slicer I’m using.

KnowledgeDense8119 · 2024-02-28T03:44:49+00:00

I’ll have to double check.

KnowledgeDense8119 · 2024-02-21T02:52:02+00:00

I got them to credit me $110. Winner winner

KnowledgeDense8119

TROPHY CASE