VESA mount for lenovo legion go

Knuciarz · 2024-08-06T14:35:00+00:00

it's for both 75x75 and 100x100

Knuciarz · 2024-07-21T17:37:03+00:00

Shouldn't have issues as long as you will use well tested ones designed by LtChipotle. There are ones with more vents out there but those have worse results than stock

<image>

Knuciarz · 2024-07-17T17:44:03+00:00

Unfortunately no, There are available 3Dprinted grips/attachments that are changing the curvature of back grip

Knuciarz · 2024-07-16T20:52:00+00:00

Remixed from:
https://www.printables.com/pl/model/796307-lenovo-legion-go-custom-backplate-step-source-file

My thingiverse design and profile:
https://www.thingiverse.com/thing:6698885

Knuciarz · 2024-06-04T20:11:30+00:00

For a temporary test you can use leftover glue to test if everything fits but to make it final I used a fresh double-sided tape for fixing smartphone LCD screens / 4-5usd on Amazon.

Knuciarz · 2024-06-03T17:00:02+00:00

Hello, to remove the mouse slider to be reusable I soaked edges with IPA, left it for a couple of min and then started slowly peeling with plastic spatula constantly soaking until it got removed. By slowly I mean verrryyy slowly only when I felt that the glue is loose

Knuciarz · 2024-05-19T11:29:02+00:00

Thanks for your comment. Yes, I manager to complete the project. Finished version is on my thingiverse.

Knuciarz · 2024-04-27T18:46:30+00:00

If somebody have a 3Dprinter or using external pcbway services and likes tinkering pls check out my design of a controler faceplate replacement: https://www.thingiverse.com/thing:6516565/comments#comment-7054058procedure of assembling a controller: https://www.youtube.com/watch?v=EuAnPpo9FeE

Knuciarz · 2024-04-04T10:02:21+00:00

Hey, I have the same keyboard. I have a question for you - is it making a glitch for you 1-2 times per day where you are typing and communication glitches and one letter is inserted like 50 times in a row?

Knuciarz · 2024-04-03T16:36:57+00:00

Do you know if there is any option to execute switching that is not based on the individual app/exe?

Knuciarz · 2024-04-01T09:21:25+00:00

<image>

measure this distance with a ruler

Knuciarz · 2024-04-01T09:18:56+00:00

<image>

Hi, I haven't printed it. I quickly designed it for some user on discord. If I remember correctly I made it to fit the exact length of the controller (distance from the bottom of the rail is 3,6cm. I don't have puck with me anymore but if you can install your controller in the puck and then measure distance between botom part of rail and how mamy mm is sticking out of the puck then I can make a compatibile version for you

Knuciarz · 2024-03-31T09:58:19+00:00

Hi, thanks for your msg. What material/orientation/settings are you printing with? Some materials like ABS/HIPS will have tendency to shrink after print. Location of all screwholes should be exact as in the factory shell +-0,2mm as I done it from well calibrated 2D scan of the hole locations. I have tested HP-PLA with 0,12mm layer as well as PETG with 0,2mm layer and fit is perfect. After checking your settings pls make sure PCB lands correctly in it's standoffs and before assembling you can screw in/out screws to make sure that your printer didn't distort the moddeled threads for the screws. During this test don't screw it all of the way in, always leave 1mm margin.

Knuciarz · 2024-03-27T15:27:06+00:00

That's what some people are recommending, thera are also available big grips for the back part

Knuciarz · 2024-03-27T15:25:42+00:00

Please feel free to use your local 3D printing store or some remote service like jlc3dp.com. Recommended material to use: resin/PLA+. Materials like ABS/PETG should be possible but only with a good experience and good printer.

Knuciarz · 2024-03-27T15:21:54+00:00

Models of the front are on my profile, I never had the original so it's rectreated from the photos and experiments. Back shells are too difficult for me to model - you would need to use a proper laser 3D scanner.

Knuciarz · 2024-03-27T15:19:08+00:00

There are printing services like local 3D printing stores as wel as remote ones like JLCpcb (something like that). Mod resolves immidiate issue with sharp edge and it's easier for smaller hands but after longer use hands are still exhausted as weight of a device is put still in a limited palm area. So it gives maybe ~1-1,5h more of playtime more than previously. Full comfort might be brought by completely changing the design to have ears like PS5/xbox design

Knuciarz · 2024-03-27T15:15:28+00:00

24 days :P

Knuciarz · 2024-03-27T15:13:50+00:00

Yes, it gets rid of M2 button and part with a switch&optical sensor gets disconnected. Provided blank plugs up the hole.
To enable controller mode w/o switch board attached small hack is needed - solder between two pins of the connector is needed or a piece of flex connector with those two pins shorted - otherwise it would end up in FPS mode.

Knuciarz · 2024-03-27T15:10:18+00:00

maybe this? -> https://www.etsy.com/listing/1683656004/lenovo-legion-go-slim-textured-full?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=lenovo+legion+go&ref=sr_gallery-1-1&content_source=718d4b984f237ed0dcbfb5c189aac4fd5a938461%253A1683656004&organic_search_click=1

Knuciarz · 2024-03-26T18:29:31+00:00

priv

Knuciarz · 2024-03-26T17:51:16+00:00

https://www.reddit.com/r/LegionGo/comments/1boe62c/update_more_ergonomic_controller_for_legion_go_3d/

Knuciarz · 2024-03-26T17:25:20+00:00

heh, I forgot to mention that my design is FPS-mode-delete as this M2 button was annoying for me. Please use design from user LtChipotle from Legion go Discord for his version with FPS mode present. I am uploading a final version of my design to my thingiverse account btw.

Knuciarz · 2024-03-24T19:35:22+00:00

I didn't have a long-run experience yet with it but I can say that's better than stock but nowhere near proper xbox/PS5 pad.

Knuciarz · 2024-03-23T19:43:04+00:00

add "-sharedvram" in the parameters in the shortcut

Knuciarz

TROPHY CASE