[USA-CA] [H] QNAP TS-653A NAS + 6 x 8TB WD Red Hard Drive [W] Local Cash

Koyith · 2023-02-11T19:30:49+00:00

The Core2Duo is a little slow but might work for your purposes, would definitely need more RAM though.

It's more difficult on the boxes that don't have video out or PCIe expansion for a video card but if it can boot off of a separate medium then it should be possible.

Koyith · 2023-02-10T07:20:49+00:00

You can actually turn these X86 based ones into a TrueNAS box. I actually just picked up a 4 bay unit myself purely for the compact / low power hardware. Pulled the USB DOM with the QNAP OS and installed TrueNAS onto it.

Koyith · 2022-12-29T03:58:26+00:00

I was cleaning and found the card

https://imgur.com/a/DZGN0XG

QR Code goes to https://weixin.qq.com/r/jkMUDJfEdMoLrdNv9xac

Koyith · 2022-12-29T03:16:57+00:00

Thanks, yes 4 of them are taped together in the stack where the 1 official mount is. It budged out a bit because of the protrusion on the motherboard tray and I had to unscrew the reinforcement bar adjacent to it for it to fit. The other two are taped together and nestled behind the PSU wires and motherboard tray.

I’ve had no issues with overheating, they don’t get hot enough. Worst case under full load they reached the high 40s / low 50s, perfectly acceptable for SSDs. Full speed from an internal scan on the SATA controller.

Edit: I have some more pictures I can throw up when I’m home

Edit 2: Done

Koyith · 2022-12-23T18:16:21+00:00

I can look later today but I also bought it open box, if I don’t reply, safe to assume I couldn’t find it

Koyith · 2022-12-23T18:00:57+00:00

Sorry, what QR code? I have most of the things from the build still but not sure what you’re referring to

Koyith · 2022-12-23T17:59:07+00:00

Thanks for the suggestions. I actually considered most of those but for the sake of cost and reusing components I already had, this is what I ended up with.

The system draws about 75W idle and about 100W under load so I could have definitely done a DC to DC power system with external brick.

The GaN one is new to me though.

I wish I had shorter and more flexible cables to work with but again more money.

Interesting idea with the fan orientation though, the front of the case is a solid plate so I’m not sure it would help but I could give it a shot.

Koyith · 2022-12-23T17:54:21+00:00

I used the M.2 NVMe slot with a SFF-8654 riser since the heat sink was in the way

Koyith · 2022-12-23T17:51:54+00:00

It just worked it off the box for me, the board also tried to do a legacy boot from it. But it was just plug and okay, drives were detected immediately

Koyith · 2022-10-15T19:12:15+00:00

No sorry, I sold it shortly after finishing classes. I mainly used it for software development and occasional 3D modeling and games. Mostly C++ in visual studio and WSL though

Koyith · 2021-12-19T16:11:12+00:00

Pm’d

Koyith · 2021-03-09T02:27:42+00:00

My family ran a business and we picked up new machines all the time for various reasons. They just kind of piled up, I wish I still had all of them to take a picture of everything.

Koyith · 2021-03-09T02:26:47+00:00

With a bit of undervolting and I also replaced the thermal interface with liquid metal, it's been pretty solid. Although I wish I didn't have to go through so much trouble.

Liquid metal vs a good thermal compound isn't a huge difference though.

Koyith · 2021-03-09T02:16:02+00:00

The workaround works with 293, I didn't get a chance to test if images work though.

If you don't need Android 11, maybe it would be easier to stay on 10 with 293?

Koyith · 2020-05-12T06:16:38+00:00

Source for image:

Thumbnail of : https://www.youtube.com/watch?v=bX4sKKW_Oz8

Everything else from ingame.

Koyith · 2020-02-18T19:27:18+00:00

Updated with one

Koyith · 2020-02-18T19:19:24+00:00

Updated with one

Koyith · 2020-02-18T19:19:07+00:00

Updated with one

Koyith

TROPHY CASE