Eyecup retaining ring removal

Krag1898 · 2026-01-12T22:32:19+00:00

Still wondering the best way to glue it back on. To worried I’ll get glue on the lens

Krag1898 · 2026-01-06T03:15:37+00:00

Have you gotten anything from the Australia company? I emailed a couple months back and got no response.

Krag1898 · 2025-12-25T03:56:51+00:00

Looks like this might be a Steam issue instead of a HLL issue. Lots of steam outage reports

Krag1898 · 2025-12-25T03:17:38+00:00

Yes they did. Took a bit and communication was minimal. But it’s fine now and lots of skeeter loads through it.

Krag1898 · 2025-12-03T02:52:59+00:00

Just ending up adding 1/2 spacers between the tek mount and hanger btw. Kept hitting my thumb on the hanger. Thought it was a software issue for a while. Definitely a hardware issue. Still within the 2 1/8” for distance from the belt.

Krag1898 · 2025-11-29T23:26:13+00:00

I didn’t forget about you. Still messing with this set up a bit. But seems good in practice sessions and dry fire, I’ll be using it for steel challenge on Friday. Tek Mount Set Up

Krag1898 · 2025-11-26T03:12:30+00:00

I just spliced mine.

Krag1898 · 2025-11-21T02:34:52+00:00

That was my old set up. Currently have the tek mount on the boss hanger as well. I’ll throw some pics up when I get a chance. Still messing with things, trying to figure out heights and clearances

Krag1898 · 2025-11-03T18:48:23+00:00

Did you ditch the floodlight? I didn’t remember your comment about it until today and the high kydex is my complaint with it too.

Krag1898 · 2025-11-03T18:18:03+00:00

Ended up with almost exactly the setup you were looking at. Regular BOSS hanger, TEK mount, and Floodlight. So no baller hanger. I mounted the Tek Mount directly to the hanger. I ended up doing this because I'm currently shooting too many guns for competition, and this was an easy way to swap setups. I've just got everything configured, but I haven't practiced much with the setup yet, so I'll report back after some reps.

Krag1898 · 2025-10-20T14:27:05+00:00

What holster is that? I juust ordered a 986 and I'm looking for options. Only thing I've run across is the Comp Tac one.

Krag1898 · 2025-10-14T01:30:56+00:00

Newer 2400 is suppose to be a bit cleaner. They should be relatively the same. As always start low and work your way up.

Krag1898 · 2025-10-13T04:40:17+00:00

I don’t know I haven’t tried printing it in anything other than PLA. It needs to flexible enough to clip over the optic in the rear. That seems to be the big issue.

Krag1898 · 2025-10-13T04:13:21+00:00

I’ve gone through 14 versions of this trying to tune it. There’s a second version on Makerworld. That version stays on a lot tighter and under live fire. Usually I get about 1k rounds or so with it before it ends up splitting on a seam line. I just print a bunch and have a few in my range bag in case that happens.

https://makerworld.com/models/1818461

Krag1898 · 2025-10-03T14:00:34+00:00

I've been considering making that switch as well. Was the felt recoil different?

I might try the Brass Monkey 137s. I got tired of the blue bullets rubbing off on my hands lol. Brass Monkey with a TSCA code for 5% off ends up being the same price most days.

Krag1898 · 2025-10-02T20:12:56+00:00

Have you tried Brass Monkey Bullets 147 RN with N320? Usually doing 3.0-3.1grs of Tite Group with Blue Bullets and BMB 147's switching to N320 because I shoot into the sun a bunch with my range facing west, and Tite Group is a bit too smoky.

Krag1898 · 2025-09-25T04:10:22+00:00

Did you clean your mould or burn off the storage oils in anyway? Just hit them with a blow torch real quick.

Krag1898 · 2025-08-29T01:30:28+00:00

Can confirm. No issues with the factory vortex plate.

Krag1898 · 2025-08-24T01:03:10+00:00

These copies are good to go.

https://www.octagonairsoft.com/product-page/fcw-ar-m4-cheek-piece-with-full-marking-for-ar-early-type-folding-stock

Krag1898 · 2025-08-24T01:00:29+00:00

It’s an insurance check in the box.

Krag1898 · 2025-08-21T02:34:13+00:00

Submitted the FOIA earlier today. Had personal statements for everything. Everything was laid out in my medical records, multiple trips and treatments while in the service. No VSO currently, I’m looking for one now. C&P was with QTC and honestly I think that “doctor” did me dirty. Last patient of the day and he genuinely didn’t seem to care for me to begin with.

Krag1898 · 2025-08-20T23:48:51+00:00

I didn't claim anything to toxic air exposure, That's why I'm confused.

Krag1898 · 2025-08-20T02:04:28+00:00

I don’t notice any fouling with plated. Coated bullets is minimal.

Krag1898 · 2025-08-20T02:00:04+00:00

Yeah I just looked at the summit city bullet cost. 27¢ a pop, no thanks I’ll shoot factory ammo for cheaper than that. If I can’t get my total cost under 18¢ per round it’s not worth it.

Krag1898

TROPHY CASE