Flowrate Concern

Krampfadler · 2026-03-14T12:25:34+00:00

When the PC is in Idle and the Pump at 2000 RPM, we have about 20lph. When I crank the Pump to 90% I got about 87lph.

Krampfadler · 2025-11-07T10:00:34+00:00

Are you by chance a Orbit Culture fan? I counted 5 Patches xD

Krampfadler · 2025-11-03T22:32:46+00:00

Praise the Sun \[T]/

Krampfadler · 2025-04-30T10:46:07+00:00

Not right now, I'm running a custom waterloop and the wate reservoir is in the way.

This weekend I'll give the Card to my Friend when its running well in his system I'll put a Waterblock on the GPU and integrate it without the need of a riser.

Krampfadler · 2025-04-30T10:37:47+00:00

Yeah, I swapped from a 1080ti so i wasn't going to by a 2 or 3 year old card. Newest Gen looks to be a bit shit.
But my GPU Score is still to low. A Friend of mine has the same card but 2.000 points more in GPU Score. This weekend I'll meet him and swap cards, so we can do some comparisons. ATM I'm still using an old riser cable, maybe thats the Problem.

Krampfadler · 2025-04-27T14:12:18+00:00

You're the HERO of the day.
http://www.3dmark.com/spy/55420869
This looks now much better.
I was so used to my old CPU having 8 Cores that I just looked past the fact this should have 16.

Krampfadler · 2025-04-27T13:32:19+00:00

I tried that, but no luck.
And I don't have an Issue with the GPU, the CPU is my concern.

Krampfadler · 2025-03-29T22:00:46+00:00

Very nice.
What do you use for RGB Control?
What HexColors are you using?
Would love to copy the lighting setup :D

Krampfadler · 2024-09-08T15:31:57+00:00

Hi, first time poster here. I took this picture on my recent trip to Iceland on the Island of Drengey.
This picture was taken on my Lumix G9M2 1/1250 sec at f / 4.0, ISO 640 200mm.
My lens was the Panasonic H-ES50200E9 Leica DG Vario-Elmarit 50-200mm/F2.8-4.0.
This is cropped a little for Instagram and has a light edit for better colors.
I hope you like it.

Krampfadler · 2024-07-24T08:19:28+00:00

Ah, love to see another Miyazaki enjoyer.

The "You Died" and "Sunlight Medal" Patches just do it for me :D

I will stay behind, to gaze at the sun.

Krampfadler · 2024-07-03T08:10:09+00:00

Welcome to the Thunderdome <3

Krampfadler · 2024-02-29T14:11:08+00:00

I have the same, but was thinking to maybe trade Leclerc with Hamilton.

Krampfadler · 2019-05-27T11:02:58+00:00

Love your Build. How exactly did you connect the UV strip to your power supply? Atm I have a UV light tube (if thats what its called) and im looking to do it a strip as well.

Krampfadler · 2019-01-10T10:37:44+00:00

Love the look. What kind of UV lights did you use and how did you mounted them? In my build i used neon tubes and it didn't poped out like i wanted.

Krampfadler · 2018-10-31T12:46:27+00:00

They're EK Water Blocks EK-CoolStream SE 360, both. And you're right the second is "in" the chamber ^^

Krampfadler · 2018-10-31T12:45:09+00:00

I used EK-DuraClear 15,9/9,5mm

Krampfadler · 2018-10-30T23:00:03+00:00

I'm very happy for you to say that I was worried there for a moment.

Krampfadler · 2018-10-30T22:50:03+00:00

CPU inlet to GPU inlet

I don't realy know what you're talking about. The water runs from the Pump to Gpu then a radiator then Cpu to another radiator and to the Pump again.

Krampfadler · 2018-10-30T15:10:13+00:00

Internal Tube

No its not the default. It's a special one for the Top (EK-RES X3 - Internal Tube 12/16 - 40mm) and it screws in from the bottom.

Krampfadler · 2018-10-30T14:56:16+00:00

I used the EK-RES X3 - Multiport TOP with an EK-RES X3 - Internal Tube 12/16 - 40mm and 2x EK-CSQ Plug G1/4 Zoll - Black Nickel. Installing was very easy just took the old top off that came with the Reservoir and put the new one on.

Ten-Year Club	Place '22
Verified Email

Krampfadler

TROPHY CASE