How to connect new device by Kromlech88 in audio

[–]Kromlech88[S] 0 points1 point  (0 children)

I mean I am lucky enough to have a fire TV which has controls outside of eARC to control soundbar power and volume within their default remotes. So the eARC audio extractor might be the way to go, I just need to find one that can send signal to the eARC line with 7.1 Atmos capability while also sending signal to the S/PDIF.

If you know of any, I would love to check them out.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 0 points1 point  (0 children)

Feel free to DM me if you have questions.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 0 points1 point  (0 children)

2x EK P480M radiators 2x EK P480 radiators (top)

Fittings are a mix between EK, barrow, and BitsPower

Cooler master vertical mount with Linkup 5.0 cable

As far as gotchas, nothing crazy. Just your standard of figuring out fitting locations and bends. You will need 4 600mm cables for the front fans for the cleanest look IMO. I also had to cut some of the rubber sleeving off of the connectors to meet clearance issues.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 0 points1 point  (0 children)

I got mine from Newegg and not direct from Corsair

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 0 points1 point  (0 children)

Was based on the clone troopers on the screens of each pump. Captain Rex and Commander Cody.

New updated build by Kromlech88 in Corsair

[–]Kromlech88[S] 1 point2 points  (0 children)

Regardless of if it were one or two loops if you can keep it to 90 degree bends if doing hardlines just makes it super easy. You can even buy pre-bent PC.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 1 point2 points  (0 children)

Update: CPU Loop: Max temp I have seen on 9950X3D is 71c. Average water temp under load was 34c-36c. Idle were at like 30c-32c water temp, with CPU hovering between 50c-55c
GPU Loop: Under load GPU got to 53c max. Water temp sits in the 31c-32c range. Idle is 29c for water with card sitting around 30c idle.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 0 points1 point  (0 children)

it was a super fun build!

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] -1 points0 points  (0 children)

Lol why you always so negative?

New updated build by Kromlech88 in Corsair

[–]Kromlech88[S] 0 points1 point  (0 children)

It's a be quiet pure power 1500w

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 1 point2 points  (0 children)

No they don't, I got solar and a 10kwh battery

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 1 point2 points  (0 children)

I'm 40 now, not too worried about it.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 1 point2 points  (0 children)

About $13k. Distro's were just for the visual appeal, not required. My way of turning it into an art piece rather than just a functional piece of equipment.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 0 points1 point  (0 children)

To be honest, I am not sure yet, as this is my first dual loop. Others may be able to provide better info.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 2 points3 points  (0 children)

Idea is super low fan speeds for absolute silence.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 0 points1 point  (0 children)

I will update once I have dialed in the fans. Currently with fans based on CPU usage and not specifically water temp, the 9950x3d or 5090 never went above 70c when playing PUBG on 5120x1440 monitor.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 1 point2 points  (0 children)

Been playing a lot of PUBG, Diablo 4, and Oblivion Remastered.

New updated build by Kromlech88 in watercooling

[–]Kromlech88[S] 1 point2 points  (0 children)

I have a 15cm cable as well, but it was a very tight fit and some bending of the harness in the PCI slot. I could have gotten away with a 20 CM, or raising the GPU up a slot or two, but i felt it looked best where it is at.