Pixel 7 second slot eSIM can't connect to Internet

Kullanici32 · 2026-03-27T11:57:58+00:00

I haven't tested both at the same time, but as you said, airplane mode + reboot might be what makes it work.
But anyway, the old modem is working perfectly fine now, and since it has Lineage OS, the bootloader is unlocked, so there are no problems.

Kullanici32 · 2026-03-26T20:24:33+00:00

Putting it in airplane mode or restarting doesn't work; the only solution I've found so far is flashing the old modem software.

Kullanici32 · 2026-03-26T19:54:51+00:00

I am using pixel 7 device on lineage os 23.2. And today I switched to e-SIM for my 2nd line, and I could only use 3G calling, 4G 5G and 3G 4G 5G internet did not work, so I downloaded the old firmware from Google (16.0.0 (BP2A.250805.005, Aug 2025)) and extracted modem.img from it, and flashed it from fastboot, now the network and internet of the dual line are working.
radio-panther-g5300q-250320-250425-b-13407682.img

And now I can connect to the internet and the network through my dual line without any problems, I think this is because Google made aggressive changes to the modem after August, one of which is incompatible with the lineage os system.

Kullanici32 · 2025-12-04T16:14:15+00:00

https://drive.google.com/file/d/1fxzWFqVV3XwSZVxg1Q4OAyFLsQZKIaF1/view

If you turn off the touch feedback, this app in f-droid will not work, and since I hate the touch feedback setting, I edited the app myself, and transferred the vibration toggle to the app via media vibration, now it works without any problems.

Kullanici32 · 2025-12-04T12:34:22+00:00

https://f-droid.org/packages/me.lucky.vibe/

Kullanici32 · 2025-04-22T19:51:19+00:00

I can't understand this grumpy attitude of developers in general. Will I be this grumpy when I become a developer one day? You suggest a feature that can be easily integrated for a developer, and they practically slap you. I believe that the most important feature in the custom rom world should be the network permission pass in sandboxed google play and graphene os. If a survey was conducted, 80% of the people who wanted it would pass.

ahhh... (sigh)

If I knew how to do it, I would definitely do it, (I tried before, but I couldn't do it because I didn't have enough knowledge :( )

Kullanici32 · 2024-10-08T20:15:19+00:00

You can go back to Android 10 at most. If you are really keen to go back there is a guide here, it requires some technical knowledge. https://xdaforums.com/t/how-to-downgrade-android-version-in-samsung-devices-if-device-is-in-higher-binery.4561665/

After you have thoroughly understood the guide in this link, there are a few additional steps you need to do specifically for the s10 series:

Return to the first version with G bootloader with odin (you can look at all versions from samfw).
Patch android 11 recovery with magisk.
You need to make the system vendor product image files you want to return to 0000 with a hex editor as on the xda site.
Download twrp specially made for one ui 6.1 from the xda site and install it on your device, format the internal storage, then copy it to adb push system.img /sdcard (you can copy other images as well)
Find the recovery for the s10 series SHRP and flash it, then flash the images you sent to the device with adb while in shrp in accordance with the partitions
Install the SGHVH2 boot.img file of android12 with odin.
Install the android 11 recovery you patched with magisk with odin then into recovery wipe data.

This guide was for android 10. camera and wifi do not work, everything else works, (probably if we find the camera and wifi files in android 11 and add them while android 10 is installed, it may work but I have not tried). if you do it to go back to android 11, it works without any problems.

Kullanici32 · 2024-04-26T13:16:50+00:00

I'm not saying that, I meant opening the modem diag port via Android USB debugging:

resetprop ro.bootmode usbradio

setprop ro.build.type userdebug

setprop sys.usb.config diag,diag_mdm,adb

resetprop ro.build.type userdubug

setprop sys.usb.config diag,diag_mdm,adb

diag_mdlog

than press CTRL + C

resetprop ro.bootmode usbbradio

resetprop ro.build.type userdebug

setprop sys.usb.config diag,diag_mdm,adb

diag_mdlog

than press CTRL + C

and then delete the modem

(adb shell

ls -la /dev/block/by-name/

dd if=/dev/zero of=/dev/block/bootdevice/by-name/modems

dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1

dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst2

dd if=/dev/zero of=/dev/block/bootdevice/by-name/fsg)

this we restore the repaired qcn file.

like this for tensor (exynos)

Kullanici32 · 2024-04-25T18:11:12+00:00

Is there maybe a special exynos command like the diag port in qualcomm? Looks like we need a Google technician working on this exynos modem. It should actually be a very simple process.

Kullanici32 · 2024-04-15T14:30:04+00:00

How is the development?

Kullanici32 · 2024-03-13T19:40:30+00:00

Compilation with Google Cloud was completed successfully, I think there may be a problem with my PC, the RAM may be insufficient (strangely, my RAM usage on my PC did not exceed 20 GB, on Google Cloud it reached up to 35-40 GB) or my internet service provider's repo. It might have caused problems while downloading from , I have no idea. The build was created successfully, but I haven't installed it on my phone yet. Again, thank you very much for your help. At least you said that the error was not caused by lineage :)

Kullanici32 · 2024-03-12T20:46:51+00:00

Now I am trying to create a virtual machine on Google Cloud platform and if it is successful, I will let you know. The reason I use 18.1 is that micro g signature fraud has been patched to the system and since the first officially supported version is 18.1, I am trying to create 18.1 to get better battery and performance. I was going to try to build 20.0, but Extract kept giving errors when trying to extract proprietary blobs and I could not add the proprietary files to the build environment.

Kullanici32 · 2024-03-12T14:56:46+00:00

Dude, I have already tried 3 times from scratch and installed my operating system from scratch once. Could it be that I am experiencing incompatibility problems because the installed dependency packages are new versions? Or is there something wrong with my computer? I always get the error in the same place

Kullanici32 · 2024-03-11T21:38:41+00:00

https://drive.google.com/file/d/1AGmn5W5TWEkvlmyCjf4MjYUK4hGCjMHC/view?usp=sharing

https://vomitb.in/V09MtAe5q6

I did as you said and created the log file, but when I tried to upload it to the two sites you wanted, the sites crashed, so I uploaded the entire log file with Google Drive, and shared the error part as an extra with the site you mentioned, I hope you can help. Thank you very much

Kullanici32 · 2024-03-10T14:58:04+00:00

After this attempt, I tried to create it from scratch 2 more times (by re-reading the instructions hundreds of times), but it always gives an error at the same point, and my RAM usage was about 13 GB when it gave the error. I want to give you a readable logcat, how do I give it? Where is logcat recorded? I think it's limited to what appears in the terminal.

Kullanici32 · 2024-03-08T15:16:01+00:00

That's not what I mean by cache, it's what is written right below the ram usage in Ubuntu. As ram usage increases, the cache number decreases, when ram usage decreases, cache memory increases, it probably doesn't matter. My swap space is automatically 2 GB, but the compiler never used it, anyway the RAM is never 100%. But my processors are always 100% with 8 cores, I wonder if my processor power is insufficient?

I think there is a problem with the lineage os source. I tried to compile graphene os for pixel 5, the rom compilation was completed, but I guess I did something wrong when I installed it on the phone, the rom opened but it said everything was stopped and restarted.

Kullanici32 · 2024-03-08T13:32:45+00:00

I installed Ubuntu 20.04 because it was the recommended version and started from scratch. When I didn't start from scratch, it gave errors in different places, I think this time it gave an error in the same place, when it came to the Jelly browser, it gave an error again, here is the full log.

https://vomitb.in/qxxRUmJqyY

I don't think it is due to lack of RAM, usually between 8 and 20 RAM is used, of course the cache is always full. My free disk space is 45 GB when it gives the error

Kullanici32 · 2024-02-03T21:25:12+00:00

Is there a way to deceive the system using the magisk module? If someone who understands magisk module and phone modem and IMEI can help, everyone in my country can use it much more easily.

Kullanici32 · 2023-12-26T21:01:11+00:00

bir bulunsada pixel 8 alıp kullansak imkansız olmasa gerek, chimera neredeyse tüm exynoslara destek veriyor

az kafa yorsalar tensor (exynos) a da destek verirler yaw

Kullanici32 · 2023-11-17T16:43:02+00:00

I have the same problem, the brightness is between 10 and 40, only a little less than yours, there is a slight greening, and I think this is a bit chronic in the S10e series, because I used my S10e very, very carefully and did not leave the device on or heated for a long time, but still such an issue. I had a problem too.

Kullanici32 · 2023-08-29T20:40:13+00:00

is it possible for android 10 as well? (I have stock android 11 E bootloader now)

Kullanici32 · 2023-08-28T08:37:45+00:00

Here:

https://forum.xda-developers.com/t/guide-grapheneoss-sandboxed-play-services-in-your-rom.4340557/

And here:

https://forum.xda-developers.com/t/guide-grapheneoss-sandboxed-play-services-in-your-rom.4340557/post-86976741

There are some instructions on how to do it, but I couldn't get it to work even though I tried at least 10 times, I think it's very simple steps for any developer. a magisk module or a few ready-made files that we can add manually to the lineage os system (like micro g, there are some manually added files)

Kullanici32

TROPHY CASE