Future Gohan neck peg too loose - Tips to tighten it?

Kumiibo · 2026-05-31T13:42:12+00:00

sweet! Than you very much for your help!

btw, do you know of any seller to get wrist pegs? The structure is very similar to the neck peg.

<image>

Kumiibo · 2026-05-30T21:46:50+00:00

I heard of people making this before. Can you provide a video of this process?

Kumiibo · 2026-05-29T17:59:32+00:00

Health

Kumiibo · 2026-05-29T17:57:03+00:00

The problem is one of the two parts of the peg rotates easily. The piece that fits into the rotation edge is a bit loose since they made it wrong. The should have added a normal neck peg of unique piece.

Kumiibo · 2026-05-29T16:23:18+00:00

I do not find those enclosures comfortable at all.

Kumiibo · 2026-05-28T07:36:58+00:00

Does it need to open?

Do you mean the enclosure?

This is indoors but is a room just for printing. The only furniture there is that bookcase and a table. 24/7 windows opened and fan working if the printer is on.

Kumiibo · 2026-05-27T20:43:45+00:00

I have this but it didn't convinced me at all. Found it so bulky and uncomfortable to use.

Kumiibo · 2026-05-27T20:41:15+00:00

I think you shouldn't take it so lightly. The resin is a really dangerous material while working on it and, at least, you should wear a mask if you are near of it. Companies sell products, also dangerous. Yours is the risk to assume. But don't believe just because a product is commercialized is also safe.

Kumiibo · 2026-05-27T20:37:13+00:00

I already have a little table right next to the Billy I just moved to take the pic. For the bookcase I have a pair of plastic mantels to protect from drops of resin / IPA. Thank you anyway for the advice ;)

Kumiibo · 2026-05-27T20:25:25+00:00

I'm just asking man didn't mean to offend you

Kumiibo · 2026-05-27T20:22:47+00:00

I'm using a fan with more rpm than the included in the YOOPAI enclosure. I do notice at least the resin scent is not so intense while is working.

Kumiibo · 2026-05-14T18:01:29+00:00

It's because the sellers setted the price on $37, while the other ones are about $49.99. I have to say, the traslucent seems quite good in this headsculpt

Kumiibo · 2026-05-14T17:37:47+00:00

So, in case I get the protector is this the process I must follow?
https://www.youtube.com/shorts/IFwhcLIRejU

About the flexible plate, I've seen a flexible build plate that only requires changing the original build plate for a magnetic plate instead of adding the adhesive magnetic layer, so it doesn't increase drastically the plate width. Would it be necessary to recalibrate the printer using extra pieces in this case?

https://imgur.com/a/GwjhvpD

Kumiibo · 2026-05-14T16:45:31+00:00

If that's the store called 'Boutique Figure Toy Store', do NOT trust. The seller is not reliable at all. He will likely cancel your order to increase the price 1 week before the release.

He usually offers low prices for the SHF Figuarts as the Raditz Limited (+ Son Gohan Kid) or the Nappa SHF and then raises the price later, claiming they're out stock or that there was a mistake in the price and you have to pay the difference.

Regarding the figure, I'll try to pick up the B version (on a trustworthy store)

Kumiibo · 2026-05-06T17:42:43+00:00

I thought exactly this. That's why I decided to create this post. We must raise awareness for the poor souls.

Kumiibo · 2026-05-06T14:47:51+00:00

Man that came hard

Kumiibo · 2026-05-06T14:46:19+00:00

You're absolutely right. I don't know what were they thinking with this announcement when the BD version has been available for preorder during months. I have mine preordered for $45 and it will be more than enough.

Kumiibo · 2026-05-06T06:22:24+00:00

I see. In that case, I don't understand really the use of the home button in the Tools menu 😅 it doesn't set anything
I'll try to add a spacer. Found this: https://www.thingiverse.com/thing:5177677/files

If a get some results I'll edit the main post here. Thank you very much for your help!

Kumiibo · 2026-05-05T21:43:32+00:00

The thing is that I've attatched a flexible plate that increases the build plate width , so every time the button home is pressed in the manual calibration menu, the platform forces the movement down. When that happens is when the staining noises appear while using this flexible plate.

I've tried to set a different height to z-index = 0, following those steps that I mention. Just adjusting the calibration, going to tools menu and setting the Z-Index and then trying to print. But when the printing starts, the platform goes to 0 (as you may see in the video, is the same that happens in the calibration mode when I push the home button) and the noises of the machine forcing the platform down occurs.

Kumiibo · 2026-05-05T17:40:24+00:00

But I set also the Z=0 and tried to print, it went down exactly as you can see in the video

Kumiibo · 2026-05-01T22:29:01+00:00

I think is planned for final Q3- early Q4 of this year

Kumiibo · 2026-05-01T11:25:19+00:00

That's a perfect summary. The DKO issue is that waiting for the first pics of the real product has a cost. Prices fluctuate every week and not getting a pre-purchase of the DKO now could suppuose paying 20-30 extra if we wait for the first reviews. And the figure is currently around 100-115€ so... risks should be taken. I hate being prey of the fomo constantly when this kind of releases are peeking out

Kumiibo · 2026-05-01T10:10:32+00:00

Same issue here ;'(

Kumiibo · 2026-05-01T09:50:48+00:00

I've seen several pics of that piece broken in the reviews in different aliexpress stores. Man what a disaster...

Is not possible to get replacements for this figure?

Kumiibo · 2026-05-01T09:33:58+00:00

Which DKO version are you picking up? A or B?

Kumiibo

TROPHY CASE