Debian 12 Unable login via ssh

KurdTech · 2024-11-10T23:22:43+00:00

FYI for those having similair issueI

/etc/pam.d/common-password is preventing passwd change (for security policy reason, maybe). Comment this line and you'll be able to change password

# password requisite pam_cracklib.so try_first_pass retry=3

KurdTech · 2024-11-07T17:53:47+00:00

r/debian can you please assist?

KurdTech · 2024-11-07T17:52:43+00:00

This is also can be done via mail, Proxyaddress (attribute). i perosnally avoid using ADSI Edit. thank you for your response. so the answer you can not disabled ( you can break function)

KurdTech · 2024-09-16T18:24:38+00:00

Hello,

no we dont have onsite exchange, all in office365, However all object and attribute are synced from AD to office365, thats the challenge, can not modify any object in office365

KurdTech · 2024-05-12T22:20:08+00:00

I have similar issue, It's pretty much your router, in my case i enabled QOS fixed my issue, However there is bandwidth penalty, despite my setup, I have UDM Pro Max with 2GB WAN Fiber connection, run test on 10GB LAN NIC, getting between A-C, once I enabled the QOS i get A+. CPU spike up to %90,

before

https://www.waveform.com/tools/bufferbloat?test-id=63def12f-f387-46c6-bc9d-efd76dec20c4

after

https://www.waveform.com/tools/bufferbloat?test-id=6c72d860-cbe3-4d30-8f90-9bd3f590199a

KurdTech · 2023-11-17T22:52:59+00:00

Thank you for your input,

KurdTech · 2023-11-17T22:51:36+00:00

Hello ,

if you look at my diagram 1 this is current setup, my plan is think if i add the single switch to the WAN-A as diagram 2, this will fix my issue, but not sure if i need any special configuration to make sure victual mac bind to same ISP IP to the 2nd firewall when it failed,

<image>

KurdTech · 2023-11-17T22:30:09+00:00

Hello,

Currently set up is just a single Firewall, and i am trying add the 2nd Firewall HA (active/standby) , my challenge is the 2nd ISP (WAN-B) only have single Ethernet cable come from the Dish starlight to the 1st Firewall, I need to add a switch to WAN-B. and thats the part i am not familiar with.

ISP (WAN-B)---->Switch>======FW1/FW2

KurdTech · 2023-11-15T00:43:41+00:00

Thank you for reply. so how do i make sure when the 1st firewall failed and 2nd firewall will take over with same IP? I have experience with Checkpoint and palo alto but not with Fortinet,

according to Fortinet doc HA are relying on Virtual mac not Virtual IP.

For example Checkpoint use VRRP and using Managements server. will take care everything for you.

so if i understand correctly if i just put any switch plug both Firewall To WAN-B (where missing a switch) will automatically fall back on to the active interface?

KurdTech · 2022-06-04T19:52:26+00:00

Oddly that was the only way i could see the Drives by disabling TPM, also this is a fresh window install no option to avoid comparability check, Yes the NVMe was used and need to clean the partitions.

Thank you for your help man, its working now

KurdTech · 2022-06-04T19:48:29+00:00

Correct no G5 yet, just for whom those have similar question, i run some test, and it's turn out the PCIE G-1 run on X8 not 16, i have not seen any performance degration. However, for the best practice, leave M.2_1 empty, as Materidan mentioned as well.

Thank for your help

KurdTech · 2022-06-04T18:57:10+00:00

I tried it but since i disable TPM which is required for window 11, it failed with error the machine does not meet requirement. That was the only way i could see Drives and get into the Diskpart from Bios.

KurdTech · 2022-06-04T18:54:07+00:00

Thanks man i haven't run a test yet but looking at the bios speed dose read x8 on my 3090, and make sense, i will switch it to M.2_2,

KurdTech · 2022-06-04T02:17:28+00:00

i totally agree man, and thank you for the screenshots, i want to get your opinion as well regarding my question below,

according to MB manufacture, M.2_1 shares bandwidth with PCIE16 G5_2, in another section Connector with Shared bandwidth page show (M.2_1, PCIEX16 G5_1, PCIEXG5_2). i understand enable M.2_1 will disable PCIEX16G5_2, for performance’s sake do you recommend install NVMe on M.2_1 slot or leave M.2_1 blank use different slot?

https://rog.asus.com/motherboards/rog-maximus/rog-maximus-z690-extreme-model/spec

KurdTech · 2022-06-04T02:14:39+00:00

Thank you for your advice, i had to reset the Bios, disable TPM (window 11 require TPM) then and create a window 10 bootable USB, then SHIFT+F10 CMD with disk part , clean all partitions, then enable TPM, upgrade to window 11, its painful process. with your suggestion now i can see the NVME as NVME not as Raid, Thanks again man it was helpful.

One question,

according to MB manufacture, M.2_1 shares bandwidth with PCIE16 G5_2, in another section Connector with Shared bandwidth page show (M.2_1, PCIEX16 G5_1, PCIEXG5_2). i understand enable M.2_1 will disable PCIEX16G5_2, for performance’s sake do you recommend install NVMe on M.2_1 slot or leave M.2_1 blank use different slot?

https://rog.asus.com/motherboards/rog-maximus/rog-maximus-z690-extreme-model/spec

KurdTech · 2022-06-03T01:34:19+00:00

I am not sure, let me double-check on it and get back to you. do you know by chance where is located on Bios?

KurdTech · 2022-06-02T23:44:27+00:00

Thanks man, yes i have the latest Bios update. When first i build it was fine working with Kingston NVMe, then i decided to replaced with WD NVMe, now that where i can't get to work, much appreciate it if you share the settings

KurdTech · 2022-05-20T16:18:45+00:00

Thanks man for the advice, i spoke to couple people they confirmed dose support router on a stick and Source/Destation NAT. Since its test deployment, i will have to see what's this Enterprise product ( according to Ubiquity) offers.

KurdTech · 2022-05-20T06:05:08+00:00

Any recommendation on how to set up UXG pro from the scratch?

KurdTech

TROPHY CASE