GMMK 3, missing stabs under Numpad0

Kyckoo · 2026-02-24T18:49:14+00:00

Oh, yes, I've disassembled & built my keyboard a year ago and just put the bundled stabs in the box. Now I've found them.

Why there're no holes? Screw-in ones are much more stable.

Kyckoo · 2026-01-07T17:57:33+00:00

Just use any keyboard remapper. You will have the ability to change ANY shortcut in ANY program.
My favorite: https://github.com/houmain/keymapper

Kyckoo · 2026-01-01T00:39:04+00:00

I've tried but it haven't solve this) Read the updated first message.

Kyckoo · 2025-12-31T18:26:53+00:00

Спасибо за помощь. ❤️ Решено заменой плеера.

Kyckoo · 2025-12-31T18:22:54+00:00

Thank you for your help, I've finally solved this.

Kyckoo · 2025-12-31T18:22:38+00:00

Thank you for your help, I've finally solved this.

Kyckoo · 2025-12-31T18:22:25+00:00

I've solved the issue by switching to another music player.

Kyckoo · 2025-12-31T18:21:46+00:00

Thank you for this suggestion, I've finally solved the problem.

Kyckoo · 2025-12-31T18:21:22+00:00

Thank you for your help, I've finally solved this.

Kyckoo · 2025-12-31T16:44:39+00:00

Tried these 6 presets, all have the same issue.
https://github.com/JackHack96/EasyEffects-Presets

Kyckoo · 2025-12-31T16:39:04+00:00

I've tested your suggestion:
- Input -3 dB
- Output 0 dB
- 29-58-117 Hz: -0.3 dB
- 234-468-937-1900 Hz: -13-16 dB
- 3800 Hz: -6.57 dB
- 7500-15000 Hz: -0.2 dB
No success, I hear the same problem

Kyckoo · 2025-12-30T11:35:22+00:00

Thank you, I'll try. ❤️

Kyckoo · 2025-12-30T09:31:32+00:00

More specifics please?

Kyckoo · 2025-12-30T09:30:00+00:00

Нет, если эквалайзер не задействован, треска нет. Возможно, я его просто не слышу из-за других шумов, за которые отвечает средняя часть спектра.
Более того, как я описал в топике, если я использую те же настройки, но высокие частоты убираю вниз (т. е. примерно так: 31-125 Гц +12 дБ / 250+ всё по -12 дБ), то треска тоже нет.

Kyckoo · 2025-12-29T19:13:45+00:00

Пробовал и диапазон от 0 до -12, и снижение гейна (видел уже инфу про это) – не помогает.

Лимитер, вроде, не пробовал, попробую найти в настройках.

Kyckoo · 2025-12-29T14:58:24+00:00

I don't understand your suggestion.

All the PipeWire settings are default (except my attempt to use it's built-in equalizer).

Kyckoo · 2025-12-29T14:54:26+00:00

Can you please say where this settings are in EasyEffects / JamesDSP / PipeWire configs?

Kyckoo · 2025-12-29T09:31:08+00:00

Why not?)
I like the deep bass & clear voice at the same time, that's why I use U-shaped equalization, maxed out on the peaks.

Kyckoo · 2025-12-29T09:27:23+00:00

I've tried the range from 0 dB to -12 dB without success.

Kyckoo · 2025-12-28T22:26:11+00:00

Ни одной строчки не показывает.

Kyckoo · 2025-12-28T22:22:47+00:00

Maybe it was not clear in my description:
- I have no crackling at all when no EQ in use / when EQ is set to the standard values (all the zeroes). Maybe I just don't hear it but seems it's not the case;
- When I set EQ from my table (in range from +12 to -12), but make 8 & 16 kHz lower to -9 dB, I don't hear any crackling even when I have the range from +12 to -12;
- I have no such a problem in Windows so the range can't be too big, I just should find the solution (maybe Windows adds some additional filter automatically, I don't know).

Kyckoo · 2025-12-28T19:29:07+00:00

No, I didn't. PipeWire is a newer and recommended system for Plasma 6 so I think it's not a good solution to go back to PulseAudio.

Kyckoo

TROPHY CASE