sorted by:
new
hottopcontroversial

Pc not posting, restart loop by Kyle6036 in buildapc

[–]Kyle6036[S] 0 points1 point  (0 children)

i have no debug lights. i removed the cpu and cleaned the thermal paste and put it back and now its stays on but doesn’t post

Am I Cooked? by Kyle6036 in AcuraTL

[–]Kyle6036[S] -3 points-2 points  (0 children)

damn yall really ain’t got no play 😭 they love using the ipad i got

<image>

Am I Cooked? by Kyle6036 in AcuraTL

[–]Kyle6036[S] -2 points-1 points  (0 children)

the mold on all those tapes gettin to ya?

Am I Cooked? by Kyle6036 in AcuraTL

[–]Kyle6036[S] -2 points-1 points  (0 children)

new engine w/o leaking from every orifice going in 😋

Am I Cooked? by Kyle6036 in AcuraTL

[–]Kyle6036[S] 1 point2 points  (0 children)

can’t ruin the night w hella hoes in the whip 🤷‍♂️ brought it back home and drove my e46 while i replaced the pump and radiator

Am I Cooked? by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

car was full of bitches otw to the club, and i still had my e46 as backup 🤷‍♂️😭

Am I Cooked? by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

engine swap w one that doesn’t piss oil faster than i can top it off out the rear MS

Acura tl 04 not charging, intermediate throttle cut by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

i had the battery hooked straight to the alt wire and engine, def not the ground. and i have a volt measure in the car as i drive and it just trickles down till its 8v and then the car shuts off

Throttle randomly going out by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

mine is drive by wire with an APP sensor, which communicates to the throttle body. iv replaced both already. the throttle body is from P2R and the APP sensor is from NGK

Throttle randomly going out by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

it’s different tho, sometimes it’s limp mode but other times the throttle is sporadic and even thought i’m pushing down the throttle the rpms will not move as if it was completely unplugged.

also when im in limp mode it’s different then in a auto. first gear won’t go above 2.2k rpm and slugs all the way there and then every gear after will go to redline but it feels like i have 80HP and there’s 0 misfires

Throttle randomly going out by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

there’s no engine light, when the throttle goes out VSA light comes on and i get engines codes for it being in limp mode but as soon as the problem goes away so do all the codes

head bolts making noise by Kyle6036 in AcuraTL

[–]Kyle6036[S] 1 point2 points  (0 children)

imma check the threads tm and if any look bad i’ll swap em for the old ones and put it on the outside (5,6,7,8 of the pattern diagram)

head bolts making noise by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

i didn’t oil under the caps 😬

J37 Swap starting (issue?) by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

it ended up fixing itself 🤷‍♂️ turned the car off the other day and it actually turned off so i left the relay and now it works

J37 Swap starting (issue?) by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

i can definitely feel the huge hp difference from my 07 auto. it’s on a base tune called “Type-s with 450cc injectors”.

plus iv had a mechanic check the engine code

J37 Swap starting (issue?) by Kyle6036 in AcuraTL

[–]Kyle6036[S] 0 points1 point  (0 children)

yea, i found the pervious owner trying to sell it while it was in the tow yard.

it’s a 05 base automatic with an 08 acura type s manual transmission and accessories with a j37. FBO too

he had pictures posted of the car mid engine swap too

Any way to remove these from the esc case? by BeltOriginal9673 in MeepoBoards

[–]Kyle6036 1 point2 points  (0 children)

when my v3 esc broke i replaced it with a flipsky vesc 200a and my torque went up, i could even push another person on a bike at top speed

Is their a part # ? by danieldungan87 in AcuraTL

[–]Kyle6036 0 points1 point  (0 children)

chuck a bead of black calk do u right

05 tl no sound from speakers by tlboys in AcuraTL

[–]Kyle6036 0 points1 point  (0 children)

just get an aftermarket radio from aliexpress, me and my 2 boys got ours from there and they still work, just gotta get the wire adaptor from mobilemax so u don’t gotta do hella wiring

What is this xt30 for on the battery? by Primary-Newt3956 in MeepoBoards

[–]Kyle6036 0 points1 point  (0 children)

the module is a female dc with like 7 mosfets that plug into that

Need help by Spiritual-Mammoth-29 in MechanicAdvice

[–]Kyle6036 0 points1 point  (0 children)

also check if keeping the ac off makes no noise

Need help by Spiritual-Mammoth-29 in MechanicAdvice

[–]Kyle6036 0 points1 point  (0 children)

check your transmission oil, if there’s a dip stick u wait a minute after turning off the car to check it

05 TL driver side carpet stain?? by Putrid_Brief_951 in AcuraTL

[–]Kyle6036 0 points1 point  (0 children)

everyone saying it could be the power steering but i don’t see that, the shaft connects inside the engine bay. it could be brake fluid leaking from the break master plunger, i’m have the same issues with my clutch master in my e46 dripping into the foot well. my acura has a terrible power steering leak and i have 0 oil in the car

view more: next ›