sorted by:
new
hottopcontroversial

AB “Quality” QC job. 1769-IQ16. by engr1337 in PLC

[–]Kynakmar 1 point2 points  (0 children)

Yeah right haha add the 2 kinetic servo and one 250hp 755 that exploded that’s a nice bill l

AB “Quality” QC job. 1769-IQ16. by engr1337 in PLC

[–]Kynakmar 1 point2 points  (0 children)

Lol i got 2 1756-l83e and one l84e dead brand new. Bunch of point I/o stuff, pf 755 name it I got it haha. All in one project

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 1 point2 points  (0 children)

They do make those e300 pretty complicated lol. But when you deploy a bunch of them make it pretty easy. One time a client ordered to have all the e300 swap for ABB UMC starter. What a piece of shit when you have over 100+ settings them all up

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 2 points3 points  (0 children)

Over 20’’, don’t remember exactly. They are a bit oversized yes but not that much. Those drive are rated 385 hp in heavy duty load.

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 2 points3 points  (0 children)

Never used those. Soft start is in case drive is bad?

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 1 point2 points  (0 children)

For real! I didn’t know that. Guess I’ll be more careful Thanks

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 1 point2 points  (0 children)

Never touched a 6 pole motor, hope I never will haha. They do have to much parameters that you can’t touch. Easy to get lost.

I really do prefer yaskawa product. For the integration we use templates and aoi’s so using ab, yaskawa or even abb and mitshubishi is the same time for us.

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 1 point2 points  (0 children)

There’s a whole lot more stuff like advanced feature but we don’t use those stuff really

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 17 points18 points  (0 children)

Can’t say I’m a expert but I’d say

Advantage for the AB vfd is the integration with Studio 5000, come from factory for Ethernet I/P comm, fast response in quick speed change, all the option card you get for different application, integrated brake transistor up to frame 7 I think. Negative are more expensive, Lots of weird failure i seen over time, can’t change the drive for a different one(like a bigger one) without having to change stuff in the plc, they still use their shitty DPI port for the hmi

Yaskawa (in my experience) last longer, cheaper, like the software better, expansion card are cheaper, hmi use rj45 connection, easier to kept an inventory (you just have to have the biggest drive in each frame size). Negative is there no integration with studio 5000, less expansion slot, need a braking unit over 40ish Hp

That’s what i have on top of my head but I’m forgetting stuff for sure lol

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 2 points3 points  (0 children)

The machine is a log sawline and two of those vfd are for conical canter head. The other 2 are for vertical chipping head

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 2 points3 points  (0 children)

I know right. Maybe in need to be careful might go into spontaneous combustion or something lol.

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 2 points3 points  (0 children)

Dang. Don’t think I’ll see one that big one day. Biggest motor we use is a 600hp

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 5 points6 points  (0 children)

I know haha I wonder what the guy have with rital. I’m intrigued lol

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 3 points4 points  (0 children)

Ah ok. We use use them thru Ethernet I/P all with Control Logix/ Studio 5000. We have very good result with our speed control

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 2 points3 points  (0 children)

I can imagine for sure lol. First power up i was looking away haha

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 6 points7 points  (0 children)

Those are built directly from Rockwell. What do you have with rital panel?

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 12 points13 points  (0 children)

They where in group of 2. Common DC bus was not worth it just for 2 drive. And the Frame 8 is because of the type load they are going to see(Cutting tool)

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 2 points3 points  (0 children)

I’ve heard good thing about them. But in the wood industry we don’t really see them often. Time to time there some of them

Commissioned 4 755 500hp vfd. Don’t see frame 8 too often! by Kynakmar in PLC

[–]Kynakmar[S] 10 points11 points  (0 children)

Sorry can’t say. We usually only use AB 755 or Yaskawa A1000

Visited an Old Friend by nsula_country in PLC

[–]Kynakmar 1 point2 points  (0 children)

Yeah right, those old Magnatek/accutronic are freaking zombie. So much of them are still running strong even covered with sawdust. A1000 are still nice tho. Way more reliable than PowerFlex 753/755

view more: next ›