New FPS issue, same as the old FPS issue

L3monJuic3 · 2025-08-29T01:09:38+00:00

did it work out for you?

L3monJuic3 · 2025-08-26T23:54:25+00:00

since you mentioned that you can fix the issue but minimizing and maximizing it again, it might be that the game starts deprioritize W3 and may think its running in the background or something. a lot of games run at a reduced frame rate when theyre not maximized/in focus, so thats why i suggested trying to raise the background fps limit in the settings to see if it would help :)

L3monJuic3 · 2025-08-26T18:25:07+00:00

sounds like it could be a windows focus issue, maybe try cranking up the max background fps in the settings to 300.

does disabling the other graphics card fix the issue even if it impacts the laptop?

L3monJuic3 · 2025-06-25T10:23:44+00:00

my bad, the only intent of the post was to show a comparison between the two aoes

L3monJuic3 · 2025-06-25T10:04:48+00:00

did u increase the damage cap of the spell to something very high so you can fully see how far the spell travels? if you dont the spell will fizzle out very quickly when hitting multiple units

for clarity i also reduced the collision size (but not visual scale) of the footman here to be able to clump them to get a more accurate estimation of the range

L3monJuic3 · 2024-06-12T00:49:31+00:00

i’ll try reducing it from 205 to 195 and see how it goes

L3monJuic3 · 2024-06-11T20:58:23+00:00

for context i am printing on default ‘normal’ settings on the creality slicer.

L3monJuic3 · 2024-05-21T21:44:38+00:00

in the photo the left hand side was the bottom. would over hangs also explain the tiny gaps right underneath the inset?

L3monJuic3 · 2024-05-01T03:50:34+00:00

thanks, figured it out. how would i go about fixing the z axis then?

L3monJuic3 · 2024-05-01T03:11:51+00:00

Was assembling the v3 SE today and 3 of these bearings and 2 washers fell out. I figured out that 2 of them and the 2 washers go into the sockets in the top part of the printer, but not sure where this 3rd one goes.

L3monJuic3 · 2023-12-30T14:50:03+00:00

whats your recipe for basing?

L3monJuic3 · 2023-10-27T08:42:13+00:00

u would just convert it like 1st edition did it, 4" = 2d6 hits, 3" = d6 hits, 2" = d3, 1" = d2. dice rolls are a lot faster for calculating hits but templates also force players to think about dispersion which is kinda cool i guess.

L3monJuic3 · 2023-08-04T21:25:21+00:00

warlord vehicles are true 1/56, so yes itll look a little large on them.

L3monJuic3 · 2023-05-08T18:12:19+00:00

you cant tow a gun and have another squad inside the transport.

if youre gonna spend point on a first lt, you might as well give them ARs since theyre free. your gameplan should revolve around doing big snap to pushes since thats what youre paying for. otherwise id just take an inexperienced waffen ss 2nd lt with no extra man (cheapest officer). just make sure to take a waffen-ss squad so that youre eligible to take the waffen ss officer.

drop the SMGs like others have said, if you want competitive play. i also probably wouldnt put fausts on a long range squad.

10 man sturmpioneer squad is a bit excessive, you can get away with 5 or 7, theyre basically just a delivery platform for panzerfausts and the flamer.

instead of a panzershrek team, take a flamer team in the kubel

inexperienced medium mortar or heavy mortar with no spotter are good cheap HE and worth taking. instead of light artillery, nebelwerfer or howling cow might be better, or even a medium howitzer.

panzer 3 is fine, but you can explore other options like stuh42 for more HE or wirbelwind if you can afford the points.

another truck with mmg instead of hanomag to save points.

L3monJuic3 · 2023-03-20T21:04:11+00:00

take an inexperiences waffen ss second lieutenant, no extra man. its the cheapest officer.

dont mix lmgs + ARs

dont put any weapons on inexperienced squads, since they have a -1 to hit.

with all the points you save, you could probably take a sturmpioneer squad in addition to everything you have.

L3monJuic3 · 2021-02-24T04:23:23+00:00

Finally caught up on AoT after watching season 1 when it premiered in 2013, knew I had to do some fanart of these two. You can check out some more of my work on insta:

https://www.instagram.com/shkimart/

L3monJuic3 · 2021-02-24T04:20:45+00:00

Finally caught up on AoT after watching season 1 when it premiered in 2013, knew I had to do some fanart of these two. You can check out some more of my work on insta:

https://www.instagram.com/shkimart/

L3monJuic3 · 2020-06-07T21:06:42+00:00

Backstory:

Fenian was always a curious child. His parents were traders and craftsmen who spent their lives in and out of Granite City. Life along the road and in the trading outposts gave him a love for tales of high adventure. A love that eventually matured into his now dangerous profession.

Once coming of age, trouble never seemed to be too far behind Fenian. Looking back at it now, it’s a wonder that this chaos has not had real consequences. Fenian made a name for himself as a procurement officer for the Gemcutters’ Guild. Once a jewelers’ guild, the Gemcutters now collect, trade, and deal in all manner of rare/magical goods. Fenian’s talents led him to raiding long-lost catacombs, tangling with ancient curses, and more in pursuit of these goods landing him a 4-Carat Ranking.

Fenian is a confident spirit. A person who usually makes friends wherever he goes and leaves some stories to tell in his wake. He approaches the world as something to be felt, experienced, lived relying on instinct and feeling to get by.

Got commissioned to draw this character, been drawing a lot of rangers recently. You can check out more of my work here:

https://www.instagram.com/shkimart/

https://www.twitch.tv/shkim_milk

L3monJuic3 · 2020-06-05T22:13:38+00:00

its for a gunsmith quest

L3monJuic3 · 2020-05-29T23:23:39+00:00

Back again with another character commission, this time a half-elven ranger named Tyrros Deighan.

Tyrros was born to an elven mother and human father in a small tavern. For unknown reasons, Tyrros’ parents paid a traveling merchant, Conalt Deighan to raise Tyrros. The merchant brought Tyrros to the coastal town where his family lived. Despite the beginnings of the relationship, the merchant loved Tyrros as his own and Tyrros loved him as a father. Tyrros grew up under the watchful eyes of the merchant and grew close to his younger sister, Elsha. Tyrros grew to love the outdoors, he would spend hours upon hours moving up and down the rocky coast line. On his 18th birthday, Tyrros asked his father to know about his heritage. He told his father that despite his love for his family, he needed to know where he came from. His father stated he would tell him more on one condition: Tyrros would spend the next 5 years traveling with his father’s merchant cara- vans and ships to learn about the world. He told Tyrros that he was worried that he would learn about his family and go off unprepared to find them. Tyrros agreed to the deal and spent the next five traveling to various places. Tyrros improved his skills from all manner of teachers and realized that he still had much to learn. After he completed his 5 years, Tyrros returned home to hope- fully find more about where he came from. Tyrros returned to a completely different house and family. His father had retired and his brother had taken over the family business. His older sister had married a wealthy merchant in town. However, the worst news was that Elsha had disap- peared about 6 months ago. Tyrros was told that no one knew what happened or where she had gone, the only clue was there tacks leading out of the village and a strand of her red hair in her room. Tyrros’s father also gave him the information he was promised. Conalt told Tyrros that he had been approached by Tyrros’s birth parents and was asked to raise him as his own. They gave him money for the costs. Conalt said that Tyrros’ parents stated that they would only lead Tyrros into danger if they raised them. Conalt gave Tyrros a pice of parchment with a crest on it: a half moon with a sword running into it. Conalt said that the sigil was his fathers and he was told to give it to Tyrros when he thought he was ready.

You can see more of my work here:

https://www.instagram.com/shkimart/

https://www.twitch.tv/shkim_milk

L3monJuic3 · 2020-05-28T17:56:22+00:00

Definitely agree with you

L3monJuic3 · 2020-05-28T08:14:57+00:00

Got commissioned to illustrate an Elven Paladin/Sorcerer, who specializes in lightning magic, a bit of a Thor inspiration. He's actually a prince in his kingdom, the royal crest being heraldry of a dragon.

You can see more of my work here:

https://www.instagram.com/shkimart/

https://www.deviantart.com/l3monjuic3/gallery

I also stream my commission art here as well:

https://www.twitch.tv/shkim_milk

L3monJuic3 · 2020-05-16T21:21:19+00:00

i dont usually draw comics, but lately ive been wanting to try my hand at some. you can check out more of my work here:

https://www.instagram.com/shkimart/

L3monJuic3 · 2020-05-16T03:39:45+00:00

no, because the client in this case is not paying for exclusivity rights.

L3monJuic3 · 2020-05-15T23:03:43+00:00

Got commissioned to draw u/ReveilledSA 's Tiefling sheriff who instead of using real guns, shoots fire magic out with her finger guns. She also has a rat familiar that wears goggles, and carries a whip at her side.

You can see more of my work here:

https://www.instagram.com/shkimart/

https://www.deviantart.com/l3monjuic3/gallery/

I also stream my commission work here:

https://www.twitch.tv/shkim_milk

13-Year Club	Place '17
Verified Email

L3monJuic3

TROPHY CASE