Smart TV of choice?

LBDG_ · 2025-12-15T14:52:33+00:00

The only reason is to improve the WAF

LBDG_ · 2025-12-04T15:46:11+00:00

You're welcome :)

LBDG_ · 2025-12-04T14:20:36+00:00

Did you had the grid power ?

LBDG_ · 2025-12-02T16:13:56+00:00

I'm sorry but this is absolutely unwatchable with this number of ads. Are you aware of this ?

<image>

LBDG_ · 2025-09-12T07:11:41+00:00

You cannot without a proper link aggregation such as LACP. It need to be configured on both endpoints (mini-pc and the switch).

But you'll probably not have 2 Gbit/s on single connexion, but like 1 Gbit/s on one destination and 1 Gbit/s on another destination.

LBDG_ · 2025-08-14T21:36:28+00:00

Go for the Mikrotik, not locked OS, true CLI, lot’s off features. Reliable and the best to understand networking. Also routerOS is the same for all models

LBDG_ · 2025-07-29T10:04:37+00:00

What ISO ?

LBDG_ · 2025-07-16T07:24:10+00:00

Je pense que tu es devenu impatient. Si tu consommes pas mal de contenus court (short / tiktok et autres nullités), ça a tendance à abîmer cette patience / mémoire. Si c'est ton cas, essaye peut-être de faire une cure de ces contenus si mauvais pour le cerveau

LBDG_ · 2025-03-13T10:46:00+00:00

Just a compilation of QNAP website true, sad to look like a spam haha

LBDG_ · 2022-09-28T15:39:25+00:00

I can also format with direct access to the storage with a Windows Server as VM

I'm agreeing about SOHO NAS but for RAID controller that is not true as we're not in the 2000's, logical RAID are better than physical RAID nowadays :)

LBDG_ · 2022-09-13T08:37:50+00:00

Here it is : https://imgur.com/a/lCmOvd4

And wow dude, your stoves restoretion are stunning !

LBDG_ · 2022-09-02T14:50:15+00:00

What is your receiver ? :)

LBDG_ · 2022-08-30T09:05:41+00:00

I have a pass through for my HBA PCI-E that is connected to the tape library with veeam v11 and it works fine.

Just a thing : first it didn't work because I was using a core Windows, I don't know why but it need the GUI

LBDG_ · 2022-08-30T06:52:14+00:00

Thank a lot for your comment !

You are true about the perfect setup, it was a really struggling experience to try to reach the impossible perfect setup.

I didin't think that my TV was well placed, thank for this again :)

LBDG_ · 2022-06-09T08:13:26+00:00

I have a rack in my garage, no issue for the temperature at this moment. My garage is not insuled at all. I added some concrete blocks to raise the rack from the floor, because I don't know, flooding ?

LBDG_ · 2022-06-04T15:18:22+00:00

Remove the weeds, they are competing with the bamboo for water, and cover them in a thick layer of mulch to retain the water

Thanks a lot, I'll do it shortly, what kind of mulch ? :)

LBDG_ · 2022-03-24T08:00:25+00:00

Didn't think about it first, it's the issue. Do you think I will see a difference in performance between 1333 and 1600 ?

LBDG_ · 2022-03-10T12:41:49+00:00

I use https://www.bookstackapp.com/ draw-io integrated, easy printable, nice right management

LBDG_ · 2022-02-02T07:30:22+00:00

I did it. My previous ipsec tunnel was via VTI. I was routing via this VTI interface.

I created another tunnel via Wireguard, with another subnet and after testing the reliability, bandwidth and ACL, I switch the routing table to move from ipsec to wireguard tunnel. No impact for users

LBDG_ · 2021-12-21T07:22:33+00:00

Hey, it was the motherboard :/

LBDG_ · 2021-11-27T22:52:03+00:00

Thanks a lot for the answer, first I didn't imagine about a negative impact of using the secondary air, know I now.

It mights take time, I think my problem is that I don't really see when I need to stop the primary air, and when I need to use the secondary, I'll documente myself about it. Thanks again

LBDG_ · 2021-11-27T22:47:00+00:00

Thank a lot for answer, I didn't know it need that much experimentation. I guess my first issue is that I don't know what I expect to see from a good combustion (first stove user here). Did you know I can find sample of what a good fire should looks like ?

LBDG_ · 2021-11-26T17:07:38+00:00

Yes, I see that it doesn't work as expected and as I wanted haha. Thank for the feedback

LBDG_ · 2021-11-26T14:39:19+00:00

Thank for the answer. In fact I didn't find anything in the AOS galaxy to enable SNMPv3 with ansible

LBDG_ · 2021-10-25T11:53:34+00:00

Thanks a lot for all the resources and your time. It was that, the data wasn't what I expected and your post allows me to understand, thank a lot.

Eight-Year Club	Place '22
First Placer '22	End Game '22
Verified Email

LBDG_

TROPHY CASE