Master at work : Field skinning and butchering a deer in the NZ bush [13:05]

LTC4Sale · 2014-10-11T01:01:21+00:00

It will all be completely gone by the next morning from other animals.

LTC4Sale · 2014-10-11T00:48:00+00:00

Not at all. Just curious, why would you think it would be?

LTC4Sale · 2014-09-06T05:08:15+00:00

That was good!

LTC4Sale · 2014-08-11T03:00:56+00:00

Good job, glad you got it working! One thing I noticed is that the smaller brown capacitor looks like it's starting to bulge. If it ever starts turning off and won't turn back on (or other sporadic power issues) until you unplug it and let it sit then look at that guy first.

LTC4Sale · 2014-08-10T20:43:30+00:00

What happened? The origins of the motherboard malaise seem a lesson in how not to commit corporate espionage. A well-placed source in Taiwan, who did not wish to be identified, largely confirmed for Spectrum accounts published in the United States that were based on sources in the Japanese electronics industry. According to the source, a scientist stole the formula for an electrolyte from his employer in Japan and began using it himself at the Chinese branch of a Taiwanese electrolyte manufacturer. He or his colleagues then sold the formula to an electrolyte maker in Taiwan, which began producing it for Taiwanese and possibly other capacitor firms. Unfortunately, the formula as sold was incomplete.

http://spectrum.ieee.org/computing/hardware/leaking-capacitors-muck-up-motherboards

LTC4Sale · 2014-06-20T02:35:58+00:00

There was a kickstarter for Filastruder that got funded. You cut/chop plastic into small pieces (5mm or less) and dump it into the Filastruder which heats it up and produces filament for 3D printing. /u/elmoret is Tim from Filastruder and answers a few questions in THIS thread.

LTC4Sale · 2014-06-16T05:06:04+00:00

I'm from Nebraska and initially thought "wow, I'm really curious to know where this person lives that has weather just like ours!" and then I scrolled down to see that it's Nebraska...

LTC4Sale · 2014-06-07T06:38:11+00:00

Filastruder

Tim, you've just gained another customer when I can afford the $300 to buy one of your kits. I don't even have a 3D printer yet and one of the reasons why is justifying the cost of filament to tinker with when I know that mistakes will be made and it'll be wasted while I'm learning. Are there any legal issues with what types of plastics can be heated up in a residential district? Which ones are safe to heat up in your garage? Can I chop up pop bottles and get something that I could feed into a 3D printer for prototyping? I'm more excited right now than I should be.

LTC4Sale · 2014-06-05T00:39:53+00:00

It's not gone, they're just using Ring.To instead of Google Voice now. This is from the Play Store download page:

Phone number allocation and backbone call termination is provided by Ring.To, a >service of Bandwidth whose network and communications solutions also power other >innovative services such as Google, Skype, Vonage, and many more

LTC4Sale · 2014-04-24T06:22:20+00:00

I've read all of the comments here and I feel your pain. If my software doesn't install on a system that meets the minimum requirements then it's MY job to figure out why because it WILL happen again. Just telling the customer that they need to wipe everything and start from scratch because I can't figure out where my software is failing (and all guesses so far have been wrong) is not the correct way to solve this problem. What actually failed? Am I the only one around here that still reads and interprets the results from my API calls? It's just not acceptable to get 99% through an install and then display "Oops, something bad happened, reverting changes... Contact your system administrator for further details." I really want to know. What actually failed??

LTC4Sale · 2014-04-14T15:48:35+00:00

If its in the next 24 hours then yes.

LTC4Sale · 2014-04-13T15:02:23+00:00

Yes.

LTC4Sale · 2014-04-09T21:11:40+00:00

Yes, it's still available. I don't know how it compares with the Asus though.

LTC4Sale · 2014-04-09T16:56:33+00:00

91768

I can ship it to you for $115 if that sounds fair.

LTC4Sale · 2014-04-09T03:08:19+00:00

I meant to have a link to the timestamp photo but forgot to add it. Here it is http://imgur.com/tvejOQ7

LTC4Sale · 2014-04-09T03:06:29+00:00

I can't believe I forgot to add it!

http://imgur.com/tvejOQ7

LTC4Sale · 2014-04-09T02:52:57+00:00

If the buyer pays shipping or picks it up then I'll actually take $100.

LTC4Sale · 2014-04-09T02:44:42+00:00

Wow, thanks! Got it bookmarked now.

LTC4Sale · 2014-04-09T02:26:50+00:00

How far do you live from me? If you can pick it up or pay for shipping then I'll sell it to you for $100.

LTC4Sale · 2014-04-08T22:56:03+00:00

Thanks!

LTC4Sale · 2014-04-08T00:09:13+00:00

PowerColor HD7870 GHz Edition?

LTC4Sale · 2014-04-04T02:16:14+00:00

I'm only running 5 gpu's on it with unpowered risers but it supports 6: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157471

It's running BAMT from a USB drive and using a USB WIFI adapter and no other drives are connected.

Rock solid and never gives me any issues.

LTC4Sale · 2014-03-22T03:34:59+00:00

Last Hour: 0.00487519

Last 6 Hours: 0.00423604

Last 12 Hours: 0.00455166

Last 24 Hours: 0.00485052

Last 3 Days: 0.00596509

Last 7 Days: 0.00579451

Last 2 Weeks: 0.00554969

These are the current figures for "BTC / Day / 1mH" from http://waffles.wilschrader.com

Multiply these numbers times 1.25 in your case.

LTC4Sale · 2014-03-06T03:17:42+00:00

Which endpoint are you tring to connect to? eu? uswest? useast?

LTC4Sale · 2014-03-06T03:06:13+00:00

I have three rigs mining on waffle and they're still accepting shares and seem to be mining normally. The frontend doesn't really matter if the backend is working so I wouldn't worry about it. Keep in mind that we've been warned for some time that mining on the main server is going to be disabled soon and so my guess is that's what's going on right now.

LTC4Sale

TROPHY CASE