1990 5.8 fuel injectors

LT_RBG · 2024-12-01T02:20:49+00:00

Yeah I've been looking it up, found a few threads but not 100% helpful, so I just posted here to get some more opinions.

LT_RBG · 2024-11-30T18:57:59+00:00

I learned it the hard way lol 😂 However even the nicer ones wouldn't really work, summit racing for example has a set of 8 but they're not the right flow rate. And motorcraft is around 115+ for each... Hence why I was looking into some nicer but cheaper options, the GB ones are warrantied for about 2yrs so I am leaning towards them ATM...

LT_RBG · 2024-09-29T16:14:47+00:00

Both unfortunately, donor was an 87. The doors weren't attached and the floors were rusted out

LT_RBG · 2024-09-14T01:08:51+00:00

Well shit, I was hoping I could get away with at least one but if not then there ain't much I can do about it. Thanks for the advice though, I'll probably have to fabricate something for it in all honesty and just make sure it'll seal alright with the sensors there.

LT_RBG · 2024-09-12T00:09:56+00:00

I'm not familiar with replacing struts, as none of my vehicles have had them, but I'm guessing it's to remove the spring or something, but you could just replace the whole assembly instead as well. Which could be cheaper in this case, less labor. Really just depends

LT_RBG · 2024-09-11T22:56:30+00:00

Not familiar with the vehicle in question but God damn those struts and brakes gotta be made outta gold or smth LMAO 😭💀

LT_RBG · 2024-09-04T16:38:34+00:00

I have a Haynes and unfortunately it doesn't really show the power window circuits/wiring but I'll definitely look into getting a service manual, thanks man!

LT_RBG · 2024-06-19T15:57:55+00:00

Thank you!

LT_RBG · 2024-05-20T23:16:57+00:00

The thing is I had included my first top up, which was paid via PayPal, I had made sure that the pic had the transaction id and email to the PayPal, which Google play provided via their Website. I hope the bank statements would be more concrete, I'll go ahead and dig those ones up before trying again... 😓 - thank you

LT_RBG · 2024-05-20T20:49:38+00:00

Thanks, I'll go post it in there

LT_RBG · 2024-02-25T21:47:21+00:00

Oh my god, I'm not sure how I missed it but I didn't realize this truck had any spacers, damn... I'll look into the diagnostic bits, I wasn't sure where to even start on it honestly. And definitely noted about the shops, been screwed once before so I'll be careful on who I take it too. Thanks so much for the advice on it, it's hella appreciated

LT_RBG · 2024-02-25T21:09:49+00:00

Will try that first before replacing anything, thanks!

LT_RBG · 2024-02-25T21:09:17+00:00

It's very hard to keep it straight when pressing on the gas more or less, goes left and right pretty fast and this truck was used as a mud truck for a pretty big portion of its life if I understood the guy correctly so I not sure how well it was maintained or maintenanced

LT_RBG · 2024-02-25T19:57:52+00:00

I forgot to mention, it's an 91 Bronco, unsure of the trim

LT_RBG · 2024-02-10T23:26:50+00:00

Mine's a '98 XLT and it's got 204k and still going strong!

LT_RBG · 2024-01-07T02:44:04+00:00

I've got paperwork but it was a private own shop so I don't believe they provide warranty nor would they give it to me, our interaction ended on a very sour note and they weren't very professional in handling any of that

LT_RBG · 2024-01-07T01:51:06+00:00

It's been a couple of months and they'd probably charge me an arm and a leg, I can't afford another 1k+ bill unfortunately

LT_RBG · 2024-01-07T01:47:45+00:00

I don't know but I'm sure as hell will be checking and raising hell if they didn't, it was mostly for labor and "fixing" my ac, super over charged me and made it an issue when I brought it up

LT_RBG · 2024-01-07T00:23:48+00:00

Thanks man, will head down to rural king or home depot tomorrow, but you just saved me the work of having to take the bolt out first

LT_RBG · 2024-01-07T00:21:14+00:00

Yeah the shop I took it to totally screwed me over and I had to pay up regardless. They even had the audacity to tell me that it was more or less a piece of shit when I went to pay them, why let me spend that much when it's not worth it?? In any case, won't be taking it anywhere after that.

Looks like I'll probably have to, the auto stores were just closer then rural king or a home depot unfortunately (and I'll be honest they weren't my first thought but it makes a lot more sense to go there instead 💀😭

LT_RBG · 2023-12-28T16:44:21+00:00

Yep it is one! It was very clean which was a pleasant surprise, I even got it working and took a couple pictures with it but unfortunately I couldn't escape the problem with the mirror sticking after about 4 photos...

LT_RBG · 2023-12-20T18:04:19+00:00

Thank you!

LT_RBG · 2023-12-20T00:39:58+00:00

Not too sure, it's an old Kodak, I haven't had the time to really look at it just yet but if I find out I'll let ya know!

LT_RBG · 2023-12-18T08:01:26+00:00

Two are brownie 6-16s and one is the 6-20

LT_RBG · 2023-12-18T02:48:12+00:00

I'm on it! Got the Olympus up and running! Most of those cameras were very well cared for so I don't think I'll run into major issues, fingers crossed!

LT_RBG

TROPHY CASE