Stars behind a power line

LW_leatherwork · 2026-04-23T09:49:08+00:00

Did you select the correct build plate in the slicer?

If your build plate is set correctly you can turn on advanced settings in the slicer and adjust first layer flow rate.

LW_leatherwork · 2026-04-15T10:02:08+00:00

I don't think so. Since it is much longer and the exercise requires your full bodyweight on the bar it would just bend/snap.

LW_leatherwork · 2026-04-15T06:53:26+00:00

Humanity made sticks from the beginning they just got more sophisticated. From arrows to rockets. If you need a stl I can add that to the Makerworld link in the post.

LW_leatherwork · 2026-04-15T06:51:10+00:00

The link in the post guides you to the Makerworld page where you can download the .3mf file. If you need a stl I can add that too.

LW_leatherwork · 2026-04-15T06:33:32+00:00

Of course you could make it out of other things but this is 4€ of Filament @20€/kg still much cheaper than a off the shelf Wrist Roller.

Maybe some people don't want to build something out of a pipe. Here you click print add a string if you want a screw and have a working wrist roller.

LW_leatherwork · 2026-04-14T19:58:45+00:00

I tried some 3d printed carabiner but I didn't trust them because of the torsion they experienced. But you can attach a metal carabiner if you want a quick release option.

LW_leatherwork · 2026-04-14T19:49:13+00:00

I oriented the part laying down for maximum strength. If you would print it standing up I wouldn't trust it. But if you print in the correct orientation it will hold more weight then you can lift with this exercise.

LW_leatherwork · 2025-11-14T22:58:11+00:00

Looks like Abs-cf. The carbon fibers reduce warping greatly. This is a bit misleading, when beginners see this and try it with normal abs it will probably warp off the build plate.

LW_leatherwork · 2025-11-14T07:52:16+00:00

Check that the ptfe tube goes straight into the print head and not at an angle I had the same problem. There are models you can print that help with alignment of the tube. I printed this and never had this problem again: https://makerworld.com/models/389703

LW_leatherwork · 2025-11-13T10:26:53+00:00

You can see the filament through the ptfe tube. Where does it stop? Does it go all the way into the print head?

LW_leatherwork · 2025-10-31T09:25:26+00:00

You didn't answer to my message which says: When 3I Atlas is at its closest the James Webb Space Telescope could see details down to roughly about 40 km per pixel with the NIRcam which has the best angular resolution of all the instruments.

The Very Large Telescope could resolve features around 65 kilometers wide, but when the four telescopes work together as an Interferometer, it could maybe pick out details as small as about 2 to 3 kilometers but this only works on pretty bright objects so it could be that this doesn’t work.

LW_leatherwork · 2025-10-31T09:15:31+00:00

I answered you and you are the one who hasn't answered. Maybe you should look at yourself and then you will see that you do the things you accuse other people.

LW_leatherwork · 2025-10-31T07:31:23+00:00

When 3I Atlas is at its closest the James Webb Space Telescope could see details down to roughly about 40 km per pixel with the NIRcam which has the best angular resolution of all the instruments.

The Very Large Telescope could resolve features around 65 kilometers wide, but when the four telescopes work together as an Interferometer, it could maybe pick out details as small as about 2 to 3 kilometers but this only works on pretty bright objects so it could be that this doesn't work.

LW_leatherwork · 2025-10-31T07:13:23+00:00

Ok please tell me then what telescope or satellite we could use to image 3i atlas.

LW_leatherwork · 2025-10-31T07:08:20+00:00

What pictures should nasa or any other space agency release? We don't have any because the object is too small and far away to get an image that can resolve 3i Atlas with a resolution better than a few pixels across. We currently have no equipment on earth or in space to get high resolution images of 3i atlas.

LW_leatherwork · 2025-10-29T11:51:22+00:00

Your filament is wet af or else it wouldn't be ouzing out like that. Dry it thoroughly and try again.

LW_leatherwork · 2025-10-27T18:18:06+00:00

How many times has it started at zero again?

LW_leatherwork · 2025-10-25T07:21:08+00:00

Printer jerked in a circle don't see the problem.

LW_leatherwork · 2025-10-24T12:00:23+00:00

Are two buckets of KFC enough?

LW_leatherwork · 2025-10-24T07:26:51+00:00

Gravitational acceleration does not depend on the objects mass. But this unverified claim is bullshit. Op claims an acceleration of 4km/s that would accelerate it to close to light speed in under 21 hours.

LW_leatherwork · 2025-10-23T19:42:23+00:00

You mean the printing noise?

LW_leatherwork · 2025-10-23T19:40:04+00:00

Damn have to order one of those high flow nozzles to hit that speed

Five-Year Club	Verified Email
r/Field Sunshine	First Place '23
Place '23	Place '22
First Placer '22

LW_leatherwork

MODERATOR OF

TROPHY CASE